3982 - Iron SUNBEAM - Free user manual and instructions

Type	Steam Iron
Brand	Sunbeam
Model	3982
Dimensions (LxWxH)	11.5 x 5.5 x 6.0 inches
Weight	2.5 lbs
Power Supply	120V AC, 60Hz, 1500W
Cord Length	8 feet
Water Tank Capacity	8 oz
Soleplate Material	Non-stick coated stainless steel
Steam Settings	Variable steam with burst and spray
Temperature Control	Adjustable dial with fabric settings
Auto Shut-Off	Yes, after 15 minutes of inactivity
Anti-Drip	Prevents water leakage at low temperatures
Self-Cleaning	Self-cleaning function to remove mineral deposits
Vertical Steaming	Yes, for hanging garments
Water Window	Transparent tank to monitor water level
Maintenance	Empty tank after use; use distilled water
Safety Features	Auto shut-off, heat-resistant handle
Warranty	1 year limited

Frequently Asked Questions - 3982 SUNBEAM

How do I fill the water tank?

Open the water fill cover and pour water into the tank using a cup or measuring container. Do not exceed the MAX line.

What type of water should I use?

For best results, use distilled or demineralized water to prevent mineral buildup. Tap water may be used but can cause scaling over time.

How to use the steam burst feature?

Press the Steam Burst button located on the handle. This releases a powerful jet of steam to remove stubborn wrinkles.

Why is my iron not producing steam?

Ensure the water tank is filled, the temperature is set to a steam setting (high heat), and the steam button is engaged. If still no steam, allow the iron to heat up fully.

How to clean the soleplate?

Unplug and cool the iron. Use a damp cloth with mild soap to wipe the soleplate. Avoid abrasive cleaners. For stubborn residue, use a soleplate cleaner.

What is the auto shut-off feature?

The iron automatically shuts off after 15 minutes of inactivity (no movement). When moved, it will heat up again. This is a safety feature to prevent accidents.

Can I use the iron vertically?

Yes, for steaming hanging clothes or curtains. Hold the iron upright and press the steam burst button. Ensure the iron is set to a high temperature.

How to descale the iron?

Use the self-cleaning function. Fill the tank with water, set to high heat, unplug, and hold over a sink while pressing the self-clean button. Repeat monthly.

What does the anti-drip feature do?

Prevents water from leaking out of the soleplate when ironing at low temperatures, keeping clothes dry.

Where can I find replacement parts?

Contact Sunbeam customer service or visit their official website for authorized parts. Common replacements include soleplate and water tank cap.

USER MANUAL 3982 SUNBEAM

Black-and-white illustration of a Sunbeam steam iron with control knobs and a dial, no text or symbols on the device itself.

www.sunbeam.com

P.N. 112926

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

READ ALL INSTRUCTIONS BEFORE USE

• Use iron only for its intended use.
• To protect against risk of electric shock, do not immerse the iron in water or other liquids.
• The iron should always be turned to “Off” before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
• Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.
• Always disconnect iron from electrical outlet when filling with water or emptying and when not in use.
• Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Take it to an authorized service center for examination and/or repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
• Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while plugged in or turned on or on an ironing board.
• Burns can occur from touching hot metal parts, hot water or steam.
• Use caution when you turn a steam iron upside down – there may be water in the reservoir.
• If the iron is not operating normally, disconnect from the power supply and have the iron serviced by an authorized service center.
• Your SUNBEAM ^ iron is designed to rest on the heel rest. Do not leave the iron unattended. Do not set the iron on an unprotected surface, even if it is on its heel rest.

SPECIAL INSTRUCTIONS

- This is a 1200-Watt appliance.* To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.

- If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the extension cord so that it cannot be pulled or tripped over.

FOR PRODUCTS PURCHASED IN THE UNITED STATES

To reduce the risk of electrical shock, this appliance has a polarized plug (one blade is wider than the other). This plug fits a polarized outlet only one way; if the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

SAVE THESE INSTRUCTIONS

WELCOME

Congratulations on your purchase of a SUNBEAM® Iron! We have designed your iron to provide the utmost in quality, ease of use and convenience.

Your SUNBEAM ^® iron offers the following features:

• Auto-Off – Automatically stops the iron from heating after 30 minutes.
• Non-Stick Surface – Prevents starch residue and fabrics from sticking to the bottom, making the iron easier to clean.

- 180° Tangle-Free Cord – Keeps the power cord off the fabric and out of your way, whether you are right or left handed.

- SPRAY MIST® – Provides a fine mist of water to dampen fabrics for creases or to remove wrinkles from heavy fabrics.

- Power “ON” Indicator Light – Lights while the iron is heating and turns off after 30 minutes.

- Soleplate – Has steam vent grooves for added convenience when ironing shirts and blouses.

FEATURES OF YOUR STEAM IRON

1. Water Tank Fill
2. SPRAY MIST® Button
3. Removable Steam Dial and Valve Stem
4. Power Cord

5. Power "ON" Indicator Light

6. Heel Rest

7. Large Water Reservoir

8. Fabric/Temperature Dial

9. Soleplate

10. Steam Vents

FILLING THE WATER RESERVOIR

You must fill the water reservoir with water to use the SPRAY MIST ^® feature and to get steam out of your iron.

TIP: Sunbeam tests each iron at the factory to ensure that they function correctly. The test may leave a small, harmless amount of water within the water reservoir. Before you fill the water reservoir, please consider the following:

• While this iron was designed for use with tap water, very hard water will reduce the performance of the iron. If your water is very hard, Sunbeam recommends that you use tap water the first time, then consider using demineralized or distilled water for subsequent use. You should use tap water once a month, however, to maintain the iron's optimal steam performance.
• Do not use water that has passed through a home water softening system. This type of water contains minerals that will decrease the performance and shorten the life of your iron. Use demineralized or distilled water, instead.

IMPORTANT: When not ironing, always set the Steam dial to Dry/O and the Fabric/Temperature dial to Off/O.

TO FILL THE WATER RESERVOIR

1. Make sure the iron is UNPLUGGED and that the large Fabric/Temperature dial is set to Off/O and the small Steam dial is set to Dry/O.
2. Hold the iron at an angle.
3. Fill the water reservoir with tap water until it reaches the maximum fill level.

WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot metal parts, hot water and steam can cause injuries.

DRY IRONING

1. Make sure the Steam dial is turned to the Dry/O setting.
2. Plug the cord into a 120-Volt AC outlet.
3. Turn the large Fabric/Temperature dial to the fabric setting you desire (Silk or Synthetics). Allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.
   TIP: Refer to the Ironing Guide on Page 7 for the recommended setting for your fabric.

STEAM IRONING

1. Make sure the Steam dial is turned to the Dry/O setting.
2. Follow the instructions for "Filling the Water Reservoir" on Page English-3.

3. Plug the cord into a 120-Volt AC outlet.

4. Turn the large Fabric/Temperature dial to the fabric setting you desire (Synthetic, Silk, Linen, Cotton or Wool). Allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.

5. Allow the iron to heat for 2 minutes and then turn the Steam dial to the appropriate setting.

TIP: Refer to the Ironing Guide on Page English-7 for the recommended setting for your fabric.

How To Use the Special Functions

SPRAY MIST®

The SPRAY MIST ^® feature dampens the fabric to aid in removing wrinkles from heavy fabrics and for setting creases. To use the SPRAY MIST ^® feature: Pump the SPRAY MIST ^® button (may require several pumps to prime the water pump).

AUTO-OFF

After 30 minutes, the power indicator light will go out. This indicates that the iron is no longer heating.

To restart the iron, unplug the power cord and plug it back in. If you do NOT want to iron any longer, unplug the iron. Then turn the small Steam dial to Dry/O and the large Fabric/Temperature dial to Off/O.

WARNING: Auto-Off is a safety feature and is not a recommended means for turning your iron off. See “Caring for Your Iron After Use” on Page English-5.

CARING FOR YOUR IRON AFTER USE

1 Turn the small Steam dial to Dry/O and the large Fabric/Temperature dial to Off/O.

1. Unplug the iron from the power source.

WARNING: NEVER yank the power cord when unplugging the iron, this can damage the cord.

STORING YOUR IRON

1. Allow the iron to cool.
2. If you do not use your iron on a daily basis, empty the water reservoir after each use for a longer iron life. To do so, turn the iron upside down to allow water to flow from the fill hole. Shake the iron gently to remove trapped water drops. Close the water reservoir cover.
3. Loosely loop the power cord together and store the iron on its heel rest.

IMPORTANT: Wrapping the cord around the iron too tightly can damage the cord.

TIP: When not ironing, always set the small Steam dial to Dry/O and the large Fabric/Temperature dial to Off/O.

MAINTAINING YOUR IRON

CLEANING THE SOLEPLATE

Clean the soleplate if starch or other residue accumulate.

To clean the Soleplate:

1. Allow the iron to cool and then wipe it with a soft, damp cloth.

WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate. This will damage the finish.

1. Run the iron over an all-cotton cloth to remove any residue.

CLEANING THE IRON TO REDUCE MINERAL BUILD UP

THIS PROCEDURE CLEANS THE IRON'S STEAM VALVE, STEAM VENTS, AND STEAM CHAMBER OF MINERALS THAT CAN CLOG YOUR IRON, AND REDUCE ITS STEAMING AND HEATING CAPABILITIES.

The Steam valve/Steam dial is removable for easy cleaning. Cleaning the iron is only necessary if you notice a reduction in steam. Use the following procedure to reduce the mineral build up:

• Set Steam dial to OFF position.
• Fill the iron's water tank to its maximum level.
• Set the temperature selector knob to its highest setting.

• Allow the iron to heat for 1-1/2 minutes.

• Turn off and unplug the iron.

• Hold the iron over the sink and activate the self-cleaning feature by removing the steam valve stem. Turn the variable steam dial to CLEAN. The valve will “pop-up.” Pull up to fully remove the steam valve.
• Slowly rock the iron from side to side and front to back for 30 seconds. When rocking from front to back, the nose of the iron should dip slightly below the rear of the iron to make certain water is circulated completely through the iron.
• Replace Steam valve. Before replacing, gently wipe the tip with a damp cloth to clean. To replace, align CLEAN with the indicator mark. Push down and rotate clockwise to DRY.
• Empty the remaining water through the fill opening.
• Dry the Soleplate with a towel.
• Plug in the iron, set the Temperature selector to the highest setting and let the iron heat for 2 minutes to dry any water remaining inside the steam chamber.
• Cool the iron and store per the instructions.

NOTE: Do not pour water into the Steam valve hole.

IRONING TIPS

• Always read garment labels and follow the manufacturer's ironing instructions.
• Sort the articles to be ironed according to the type of fabric.
• You should first iron garments requiring low temperature (e.g., silks and synthetics) to avoid damaging them with an iron that is too hot.
• If you are unsure of the fabric content of the garment, test a small area, such as a seam or facing, before ironing a visible area. Start with a low temperature and gradually increase the heat to find the best setting.
• When changing the temperature from a high setting to a low setting, allow approximately 5 minutes for the lower temperature to be reached.
• When steam ironing, use long, slow passes over the fabric. This will allow the steam to penetrate the fabric while allowing the heat of the soleplate to dry out the moisture.
• To iron linens, turn garment inside out. Be careful not to use an iron that is too hot because the lining may melt or stick to the soleplate.
• To iron zippers, use an ironing cloth or make sure the zipper is closed and iron over the flap. Never iron directly over an unprotected zipper.
• Use the Ironing Guide on Page English-7 to select the best setting and method for the fabric you plan to iron.

IRONING GUIDE

FABRIC	STEAM SETTING	FABRIC DIAL SETTING	IRONING RECOMMENDATIONS
Acrylic	Dry/O	Synthetic	Iron garment inside out
Acetate	Dry/O	Synthetic	Iron garment inside out while still damp.
Viscose	Dry/O	Synthetic	Iron garment inside out or use an ironing cloth* to prevent shine marks.
Nylon	Dry/O	Synthetic	Mainly dry iron; steam may be used under garment manufacturer's instructions.
Polyester	Dry/O	Synthetic	Iron garment inside out while still damp.
Rayon	Dry/O	Synthetic	Iron garment inside out while still damp.
Silk	Dry/O	Silk	Iron garment inside out.
Wool	Medium Steam	Wool	Iron garment inside out or use an ironing cloth.*
Wool Blends	Medium Steam	Wool	Iron garment inside out or use an ironing cloth.*
Cotton Blends	Medium Steam	Cotton	Follow garment manufacturer's instructions. Use setting for the fiber requiring the lowest setting.
Corduroy	Medium Steam	Cotton	Iron garment inside out or use an ironing cloth* and then brush the garment with your hand to raise the texture of the fabric.
Cotton	High Steam	Cotton	Iron dark fabrics inside out to prevent shine marks.
Linen	High Steam	Linen	Iron garment inside out or use an ironing cloth* to prevent shine marks (especially on dark fabrics).
Denim	High Steam	Linen	Use the SPRAY MIST® feature for deeper penetration to remove wrinkles.
*An ironing cloth is a cotton, dry-cleaned cloth that you place over the garment you are ironing to prevent the fabric from looking shiny.

One-Year Limited Warranty

Sunbeam Products, Inc., or if in Canada, Sunbeam Corporation (Canada) Limited (collectively “Sunbeam”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Sunbeam dealers, service centers, or retail stores selling Sunbeam products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than Sunbeam or an authorized Sunbeam service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What Are the Limits on Sunbeam's Liability?

Sunbeam shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

Sunbeam disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How To Obtain Warranty Service

In the U.S.A. -

If you have any question regarding this warranty or would like to obtain warranty service, please call 1.800.458.8407 and a convenient service center address will be provided to you.

In Canada -

If you have any question regarding this warranty or would like to obtain warranty service, please call 1.800.667.8623 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc., located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited, located at 5975 Falbourne Street, Mississauga, Ontario L5R 3V8.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

English-8

Sunbeam®

DO NOT SEND THIS PRODUCT TO THE PLACE OF PURCHASE

For product questions:

Sunbeam Consumer Service

USA: 1.800.458.8407

Canada:1.800.667.8623

www.sunbeam.com

©2003 Sunbeam Products, Inc. All rights reserved.

SUNBEAM® and SPRAY MIST® are registered trademarks of Sunbeam Products, Inc.

Distributed by Sunbeam Products, Inc.

Boca Raton, Florida 33431

NO RETORNE ESTE PRODUCTO AL LUGAR DONDE LO COMPRÓ

Sunbeam Consumer Service