L07DPF10 - Digital photo frame Logik - Free user manual and instructions

Product Type	Digital Photo Frame
Brand	Logik
Model	L07DPF10
Display Size	7 inches (LCD)
Aspect Ratio	16:10
Resolution	432 x 234 pixels
Dimensions (Approx.)	200 x 150 x 20 mm
Weight	293 g
Power Adapter Input	100-240V AC, 50-60Hz
Power Adapter Output	5V DC, 1.0A
Supported Memory Cards	SD, MMC, MS
USB Port	USB Host 2.0, supports flash drives (max 400mA)
Photo Format	JPEG (up to 8000x8000 pixels)
Slideshow Settings	Interval (3s-1h), transition effects, shuffle
Display Adjustments	Brightness, contrast, saturation (each +/-3)
Auto Run	Yes, configurable to main menu or photo slideshow
Orientation	Landscape or portrait
Stand	Included, detachable
Spare Part: Stand	P/N 27-155-05930100
Spare Part: Adapter	P/N 49-501-00600059
Safety Warnings	Avoid moisture, heat, and obstructed ventilation
Cleaning	Wipe with a soft dry cloth; do not use liquids

Frequently Asked Questions - L07DPF10 Logik

How do I turn on the Logik L07DPF10 digital photo frame?

Slide the ON/OFF switch located on the side to the ON position. To turn off, slide to OFF.

Can I view photos from a USB flash drive?

Yes. Insert the USB flash drive into the USB host port. From the main menu, select USB to view photos. Only JPEG files are supported.

What photo formats are supported?

The frame supports JPEG format only. Maximum resolution is 8000x8000 pixels. Convert other formats using a computer.

How do I start a slideshow?

While viewing a single photo, press the Play/Pause button to start a slideshow from the current photo. Press again to pause.

How can I adjust the brightness of the display?

Go to Setup > General Setup > Brightness. Use the arrow buttons to select a value from -3 to +3 and press Play to confirm.

Why are some photos not displaying?

Ensure the photos are in JPEG format. Some JPEG files may be incompatible; resave them using a computer. Also check if the memory card is compatible (SD, MMC, MS).

Can I rotate photos?

Yes. While viewing a photo or slideshow, press the Rotate button in the OSD menu (icon appears as a curved arrow) to rotate the image.

How do I set the slideshow interval?

From the main menu, select Setup > Photo Setup > Slide Show Time. Choose from options: 3s, 5s, 15s, 1 min, 15 mins, or 1 hour.

What should I do if the frame freezes or stops responding?

Switch the unit off by sliding the ON/OFF switch to OFF, wait a few seconds, then slide back to ON. If the issue persists, disconnect the power adapter.

Where can I purchase replacement parts?

Visit Partmaster.co.uk or call 0844 800 3456 (UK only). Refer to part numbers: Stand (27-155-05930100) and Mains Adapter (49-501-00600059).

USER MANUAL L07DPF10 Logik

Black-and-white photo of hands holding a wedding certificate and flowers, framed in a dark frame (no text or symbols visible)

Gradient background with no text, symbols, or identifiable objects

Contents

Unpacking....4

Product Overview....5

Main Unit 5

Preparations....6

Attaching the Stand....6

Connecting to the Main Power

insering the only child / use first dose....

Main Menu 9

SELECTING THE MEMORY DRIVE .... 5

Viewing Photos 10

Thumbnail View....10

Playing a Slideshow....11

Changing Frame Settings 12

Setting Auto Run....13

Hints and Tips....14

Specifications....15

Safety Warnings 16

Thank you for purchasing your new Logic Digital Protein Forme.

We recommend that you spend some time reading this instruction manual in order that you fully understand all the operations features it offers. You will also find some times and due to help you teach any issues.

Read all the weekly instructions carefully before use and keep this instruction manual for future reference

Unpacking

Remove all packaging from the unit. Retain the packaging. If you dispose it please do

The following items are included:

Digital Photo Frame

Photo Frame Stand P.N.: 27-155-06930100

Mains Adapter P.N.: 49-501-00600059

Instruction Manual P.N.: 46-007-41010209

If home are moving or damaged, please request farmers till only. Tel: [phone] for unavailable.

Product Overview

Main Unit

Name Description
1. ON / OFF switch - To turn the unit on and off
2. button	- To move right in the menu / thumbnail mode / option settings- To display the next photo
3. button - To move up in the menu / thumbnail mode / option settings
4. Play / Pause ▶II	- To start / pause the slideshow- To confirm a setting or function
5. button	- To move left in the menu / thumbnail mode / option settings- To display the previous photo
6. button - To move down in the menu / thumbnail mode / option settings
7. USB host - To accommodate USB devices such as portable USB flash drives or flash memory card readers
8. SDVAMC/MS slot - To accommodate SD, MAC, MS cards
9. DC-N socket - To connect to the mains supply
10. Stand receptacle - To attach the supplied stand

Preparations

Attaching the Stand

1. Take out the stand attached at the back of the unit.

1. Screw the stand into the stand receptacle.

1. Once the stand is fixed, you can choose to display your unit in a landscape or portrait position.

Landscape Feature: Ambient Feature

To take off the stand, unscrew it from the stand receptacle.

Connecting to the Mains Power

1. Connect the supplied mains adapter (5V DC, 1A) to the unit, and then plug into the mains socket.

1. Slide the ON/OFF switch to the ON position to turn on the unit.

2. To turn off the unit, slide the ON/OFF switch to the OFF position.

Inserting a Memory Card / USB Flash Drive

This unit can only display one storage media's contents at a time.

If more than one storage device is connected, please refer to "Selecting the Memory Drive" and select your desired drive to be displayed in the main menu.

This frame can only play images (JPEG). If the files you want to view are in a different format, please use your computer to convert the images to a readable format.

• To remove MNC/SDVMS card, pull the card straight out.
• Some of the newer higher capacity cards may not be compatible with this frame.

Main Menu

In the main menu, you can select the connected source to view photos and change frame settings.

Press and hold the ▶ button to access the main menu. All connected sources, setup and now playing icons are displayed.

Selecting the Memory Drive

Use the -or buttons to navigate between the options in the main menu, and then press the button to confirm or enter the submenu.

USB Highlights when you select a USB flash driver.

Card Highlights when you select a 5D / MMC / N/S card.

Setup To customise the settings of the unit.

- In the main mode, if you know the 7 button, the frame will automatically start the intersection of the pre illuminated phone. If you enter a SD / NMC / NC card or a USB device, the frame will automatically start the intersection.

- There is a button indicator on the right of the screen, indicating which button you are pressing.

9

Viewing Photos

Thumbnail View

In Photo mode, the photos on the selected memory source can be displayed on the screen as thumbnails. Up to 12 photos are displayed at a time.

1. Select a memory source (e.g. USB, SD/MMC/MS) on the main menu and press the button. The thumbnail mode appears
2. Press the 📄, or buttons to select a photo, and then press the button.
   The photo will be displayed on the screen.
3. To navigate through the thumbnails or move to the next or previous page of thumbnails, press the _or buttons.

Playing a Slideshow

You have two ways to start playing a slideshow:

1. While browsing a single photo, press the ▶ button to start a slide show from the

current photo.
- Press the ▶ button once to open the OSD menu and pause the slideshow,
press twice to carry on the side show.
- Press the button to exit the slideshow and view thumbnails of the photos.
- Press the button to rotate the photo.

Using OSD Menu

You also can use the OSD menu to view photos manually one by one.

Press the button while viewing a photo or slideshow. The CSD menu appears on the screen and the slideshow pauses.

1. Press the (or) button to navigate between icons on the OSD menu.

2. To start or resume a slideshow from the current photo, highlight ▶ on the screen and press the ▶ button. The icon is changes to the icon on the screen.

3. To select previous/next photo, highlight 📂 or 📌 on the screen, and then press the ⏻tion.
4. To rotate a photo, highlight. On the screen and press the button
   repeatedly.
5. To zoom in on a photo, highlight ☑ on the screen and press the button repeatedly to magnify a photo in the following sequences X2, X4, X8, X16. When a photo is magnified, hold the ... or button to view another part of the photo.
6. To exit and return to the previous screen, highlight ➤ on the screen and press the button.

Changing Frame Settings

The system settings let you customise and configure your unit.

1. Select the Setup icon in the main menu and press the ▶ button. The Setup Menu appears on the screen.
2. To select a setting option, press the _ or buttons.
3. To change the value, press the ▶ button. Secondly, press the ▶ of buttons to select an option. Thirdly, press the ▶ button to conform.
4. Press and hold the ▶ button to return to the main menu.

Setting Items Description
Photo Setup Slide show Time	Set up the interval time for the slideshow. The available options include: 3s, 5s, 15s, 1 min, 15mins, 1 hour.
Photo Mode	Set photos to Full Screen or Standard Screen when you are viewing them.
Transition Effect	Set up the style of photo transition while playing a slide show.
Date Stamp	Display the time information of photos when you are viewing them.
Shuffle	To play photos in a random order or in order while playing a slideshow.
General Setup Language Set up the language of the OSD menu
Brightness	Adjust the brightness of the screen.The available options include: +3, -2, -1,0,-1,-2,-3.
Context	Adjust the contrast of the screen.The available options include: +3, -2, -1,0,-1,-2,-3.
Saturation	Adjust the saturation of the screen.The available options include: +3, -2, -1,0,-1,-2,-3.
Auto run	Set the unit to run a specified mode automatically when you switch it on.
Default Reset all settings to the default settings.

Setting Auto Run

You can set the unit to run a specified mode automatically when you switch it on.

1. Select the SETUP icon on the main menu and then press the button. The
   Setup Menu appears on the screen.
2. Press the . . . or . buttons to select General Setup, and then press the . button.
3. Press the or buttons to select Auto run, and then press the Eotton.
4. Press the - of Buttons to select a specified mode you like

- Main menu: The unit will divide the main menu to you switch it on.

1. From the Section to Deline.

2. From the Section to Deline.

3. Press and hold the ▶ Edition to 2017.

Hints and Tips

No power

- Check to make sure the mains plug is plugged into the mains socket.

• Make sure there is power in the mains socket.

Unable to view photos on the unit

- Not all JPEG files are compatible. Please open the files in a computer and resave

them as JPEG files and then try to playback in the unit.

- Check if the memory card is compatible.

If the photo display is distorted or cannot display properly

- Go to the main menu, then the SETUP and change the display mode to match your photo (Full / Standard).

If photo display seems slow

- Use lower resolution photos.

The image is distorted or blurred.

- Resolution of the image is too low. Try playing a file with a higher resolution.

Resolution of 432 x 234 pixels is recommended.

Cannot detect any external device via the USB 2.0 A-Type port

- This unit only support a USB flash drives and it does not support any external hard

disks or MP3 player via the USB port.

The unit does not work properly

- Please switch off the unit and on again.

Specifications

Display Analog LCD	Panel size/ inchsetScreen aspect ratio: 16:10Resolution: 452*234 pixels
MD DC in
Power Adapter Input: 100x-248Hz	AC, 50-60HzOutput: DC 5V 1.0A
USB Port USB Host 2.0	Supports USA flash mediaUSB Max Load: DC 5V, 400mA
Supported Peripheral Devices	SDTM Secure Digital Cardi, MMCTM (MultiMediaCardi), MSTM (Memory Stick)
Supported Photo Format IFOG	Maximum resolution: 8000*8000 pixels
Storage Condition Humidity: 20%	20~60°C
Working Condition Humidity x	70%P~45°C
Dimension (L x W x H) 20" x 15"	x 20mm
Weight 293p

Features and specifications are subject to change without prior notice.

Safety Warnings

When using electrical appliances, basic precautions should always be followed, including the following:
- Read all the instructions and retain this instruction manual.
- Ensure that all electrical connections (including the mains adapter and power cable) are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains adapter before making or changing connections.
- Consult your dealer if you are ever in doubt about the installation, operation or safety of your unit.
- Do not allow the unit to be exposed to dripping or splashing.
- Never store in hot or very cold areas. Recommended operating temperature is 0–40°C.
- Do not use the unit in areas with high moisture (e.g. bathroom) or dusty
- Do not place hot objects or naked flame sources such as lighted candles or night lights on or close to the unit. High temperatures can melt plastic and lead to fires.
- Do not obstruct the ventilation openings of the unit with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the unit.
- Do not handle the power cable with wet hands.
- Be careful with the LCD panels on the unit.
- Only use attachments/accessories specified by the manufacturer.

• When the unit is not in use or unattended for a long period of time, disconnect it from the mains socket.
• Do not remove any fixed cover as this
• Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains adapter and consult your dealer.
• Never let anyone especially children push anything into holes, slots or any other opening on the case - this could result in a fatal electrical shock.
• Route the power cable so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear, tear or heat.

Note about LCD screen

The LCD screen is manufactured using high-precision technology. However, some tiny black points and/or bright points (red, blue or green in colour) may constantly appear on the LCD screen. These points are generated in the manufacturing process and are normal.

Notes: If you require a replacement for any of the Items listed below, please quote their corresponding part numbers.
Replacement Part Part Number
Photo Frame Stand 27-155 05930100
Mains Adapter 49-501-00600059

Partmaster

Visit Partmaster.co.uk today for the easiest way

to buy electrical spares and accessories with

over 1 million spares and accessories available

next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only)

Calls charged at National Rate.

This symbol on the product or in the instructions means that

your electrical and electronic equipment should be disposed of

the end of its life separately from your household waste. There are no other factors that have been living in the Bay

and separation of the system for ordering P145 P2.

For more information, please contact the local authority or your

retailer where you purchased the product.

DSG Retail Ltd · Maylands Avenue · Homei Hempstead

Herts·HPJ 7TG·England

(P.N.: 46-007-41010209)

Gradient background with no text, symbols, or identifiable objects

Gradient background with no text, symbols, or identifiable objects