B3920FHD - Television Skantic - Free user manual and instructions

Product Type	LED LCD Television
Brand	Skantic
Model	B3920FHD
Screen Size	39 inches (estimated)
Resolution	Full HD (1920 x 1080)
TV System	PAL/SECAM B/G D/K K' M'L/L'
Digital Reception	DVB-T MPEG2, DVB-T MPEG4 HD, DVB-C MPEG2, DVB-C MPEG4 HD
Number of Preset Channels	1000
RF Aerial Input	75 Ohm (unbalanced)
Operating Voltage	220-240V AC, 50 Hz
Audio System	German + Nicam Stereo
Audio Output Power	2 x 8 W (10% THD)
Power Consumption	100 W (max)
Aspect Ratio	16:9
Connectivity	HDMI, Scart, VGA, USB, CI Slot, Headphone, SPDIF, PC/YPbPr Audio, Side AV
Accessories Included	Remote Control, 2 x AAA Batteries, Instruction Book, Side AV Connection Cable
Special Features	Teletext, Fastext, TOP text, Child Lock, Sleep Timer, AVL, PC Input, Game Mode, Picture Off, Energy Saving Mode
Cleaning Instructions	Unplug TV, use only a soft dry cloth. Do not use liquid or aerosol cleaners.
Safety Precautions	Do not remove cover. No user-serviceable parts. Keep away from heat sources and water. Use only in dry interiors.
Energy Saving	Power Save Mode (Eco, Picture Off) to reduce energy consumption.

Frequently Asked Questions - B3920FHD Skantic

What should I do if my Skantic B3920FHD TV does not turn on?

Check that the power cord is properly connected to a 220-240V AC outlet. Ensure the mains switch on the TV (bottom right) is set to '|'. If still no power, try unplugging for 10 minutes and reconnecting. If the problem persists, contact qualified service personnel.

How can I improve poor picture quality?

First, check if the correct TV system is selected. Ensure the aerial is properly connected and not near interfering devices like neon lights. Adjust the aerial direction if needed. You can also use the Noise Reduction setting in the Picture menu (Low, Medium, High, Off).

Why is there no sound from my TV?

Check if the TV is muted (press Mute button). Increase the volume. Ensure the audio output is not set to an external device incorrectly. In the Sound menu, check the Balance setting and ensure it is centered. If using external speakers, verify connections.

The remote control is not working. What can I do?

First, check if the batteries are exhausted. Replace with new AAA batteries ensuring correct polarity. If still not working, you can use the control button on the TV (left side) to operate basic functions. If the remote is still unresponsive, try resetting the TV by unplugging for a few minutes.

How do I connect external devices like a DVD player or game console?

Use the appropriate input on the back or side of the TV. For HDMI devices, connect via HDMI port. For older devices, use Scart or the Side AV input with the supplied cable. Then press the AV/Source button on the remote to select the correct input source.

Can I play media files from a USB drive?

Yes, connect a USB flash drive or external hard disk to the USB input on the side of the TV. Press Menu, select Media Browser, then choose Video, Music, or Picture tabs to browse and play supported files (e.g., MP4, AVI, MP3, JPEG). See manual for supported formats.

How do I perform a first-time installation or rescan channels?

Go to Menu > Install and Retune > Automatic Channel Scan. Select Digital Aerial, Digital Cable, Analogue, or a combination. The TV will search and store available channels. For first-time installation, the setup wizard will appear automatically when you turn on the TV for the first time.

How does the energy saving feature work?

In the Picture menu, you can set Power Save Mode to Eco or Picture Off. Eco reduces luminance to optimum level. Picture Off turns off the screen but keeps audio. This helps reduce power consumption. Also, ensure the TV is disconnected from mains when not in use for long periods.

What is the function of the 'My Button' on the remote?

Press and hold MY BUTTON 1 for five seconds while on a desired source, channel, or link. A message 'MY BUTTON IS SET' confirms the association. Thereafter, pressing that button will directly switch to that source or channel. You can set MY BUTTON 2 similarly.

How do I update the software on my TV?

Ensure your TV is connected to the internet via Ethernet (for manual update) or use over-the-air update. Go to Menu > Settings > Other Settings > Software Upgrade > Scan for Upgrade. The TV will search for new software. If found, download and reboot. Alternatively, enable Automatic scanning in Upgrade Options for updates at 3:00 AM.

USER MANUAL B3920FHD Skantic

Front view of a blank flat-screen computer monitor (no text or symbols visible)

Top-down schematic of a room layout with furniture and fixtures (no text or labels)

Interior layout diagram of a room with furniture and fixtures (no text or symbols visible)

Bruk av min knapp 1 (*)

Diagram of a cylindrical device with labeled terminals and internal light paths, no readable text or symbols present.

BLA: Viser alternative for filtering.

PAL/SECAM B/G D/K K' M'L/L'

DIGITALT MOTTAK

DVB-T MPEG2

DVB-T MPEG4 HD

DVB-T MHEG-5-motor (kun for Storbritannia)

DVB-C MPEG2

DVB-C MPEG4 HD

MOTTAR KANALER

VHF (BÁND I/III)

UHF (BÁND U)

HYPERBÁND

ANTALL FORHÄNDSINNSTILTE KANALER

1000

KANALINDIKATOR

Skjermvisning

RF-ANTENNEINNGANG

75 Ohm (ubalansert)

DRIFTSSPENNING

220-240V AC, 50 Hz

LYD

Tysk + Nicam Stereo

LYDUTGANGSKRAFT (W _FWS ) (% 10 THD)2 x 8

STR∅MFORBRUK (W) 100 W (maks)

PANEL 16:9

Lisensinformasjon

Safety Precautions 23

Preparation 23

Intended Use 23

Heat sources and Flames 24

Headphone Volume 24

Wall Mounting (optional) 24

LCD Screen 24

Cleaning....24 Environmental Information....25

Environmental information 25 Accessories included 25

Accessories Included 25 TV Features 26

TV Features 20 Viewing the TV/ 26

TV Control button # Operation 27

Viewing remote control - TV 28

Using a Conditional Access Module 30

Slandby Nifications 30

Installing the Ballaries to the Rempts 31

Connect Power & Antenna/Cable 31

Switching On/Off 31

First Time Installation.... 31

Aerial Installation 32

Cable Installation 32

Media Playback via USB Input 33

Media Browser Menu 33

Using MENU button in Media Browser Mode ... 33

Changing Image Size: Picture Formats ...... 33

Using the Channel List 33

Electronic Programme Guide (EPG) 34

Sorting Channel List 34

Quick Menu 34

Menu Features and Functions 35

Menu Features and Functions 36

Menu Features and Functions 37

Menu Features and Functions 38

eletext 39

Digital Teletext (for UK only) 39

Software Upgrade....39

Troubleshooting & Tips 40

Image persistence - ghosting 40

No power 40

Poor picture 40

No picture 40

No sound 40

Remote control - does not operate 40

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSID

REFER SERVICING TO QUALIFIED SERVICE

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Please read these instructions fully before installing or operating.

Preparation

Place the device on a solid even surface. For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, do not place any objects on top of the set. Use this device in moderate climates. Operation temperature and operation humidity: 0°C up to 40°C, 85% rel. humidity max. (not blocking ventilation openings).

Intended Use

This device is used to receive and display TV programmes, as well as to play CDs and DVDs (see "This device compatible disc types"). The different connection options make an additional expansion of the reception and display sources possible (various external devices). This device is only suitable for the operation in dry interiors. This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modifications have

Children may not recognize dangers right! The swallowing of batteries can be fatal. Keep batteries always out of reach of small children. If a battery is swallowed, immediately seek medical attention. Keep the packaging films out of reach of children. Risk of suffocation.

Power source

• The TV should be operated only from a 220-240 V AC, 50 Hz outlet.

- Warning: Do not leave your TV in standby or operating mode when you leave your house.

Positioning the TV

• For ventilation, please leave a clear space of at least 10cm all around the TV.

- Do not block the ventilation openings.

- Do not place the TV on sloping or unstable surfaces, the TV may tip over.

• To prevent damage to the TV, do not place any objects on top of the TV.

- Only use the TV in moderate climates.

Power cord and plug

• The power cord plug should be easily accessible. In case of storms and lightning, when going on holiday, or when the TV is not used for a long period of time disconnect the power cord from the mains power socket.
- The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.
- Do not place the TV, furniture, etc. on the power cord or pinch the cord.
- Handle the power cord by the plug, do not unplug the TV by pulling the power cord.
- Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.
- Never make a knot in the power cord or tie it with other cords.
• Power cords should be placed in such a way that they are not likely to be stepped on or driven over
• A damaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by qualified personnel.

Moisture and Water

• Do not place objects filled with liquids, such as flower vases, on top of the TV. Avoid from dripping or splashing.
• If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualified personnel before operating it any further.

Ventilation

• The slots and openings on the TV set are intended for ventilation and to ensure reliable operation.
• To prevent overheating, these openings must not be blocked or covered in anyway.

Heat sources and Flames

• Do not expose the TV to direct sunlight or other heat sources.
  • The TV should not be placed near to
  open flames and sources of heat such as an electric heater.
• Ensure that no open flame sources, such as lighted candles, are placed on top of the TV.

Headphone Volume

- Excessive sound pressure from earphones and headphones can cause hearing loss, please take care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available).

LCD Screen

• Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performance of your product.
  • Take care not to scratch the screen with fingernails or other hard objects.

Cleaning

• Before cleaning, unplug the TV from the wall socket.
- Do not use liquid or aerosol cleaners. Only use a soft, dry cloth.

[Non-Text]

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

[Non-Text]

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

[Non-Text]

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

[Non-Text]

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

广力云智慧零售收银系统

Environmental Information

This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps:

You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode as Eco, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

Power Save Mode

If Picture Off is selected, "Screen will be off in 15 seconds." message will be displayed on the screen. Select PROCEED and press OK to continue. The screen will be off in 15 seconds. If you disable Power Save Mode, Picture mode will be automatically set to Dynamic.

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption.

Disconnect power when going away for longer time. It is highly recommended to activate Power Save Mode setting to reduce your annual power consumption. And also it is recommended to disconnect the TV from the mains plug to save energy more when you do not use. Please helps us to save environment by following these steps.

Repair Information

Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact your local dealer, where you have purchased this TV for further information.

Accessories included

Remote Control

Batteries: 2 x AAA

Instruction Book

Side AV Connection Cable

TV - Features

• Remote controlled colour TV.

- Fully integrated digital/cable TV (DVB-T/C).

- HDMI connectors for digital video and audio. This connection is also designed to accept high definition signals.

- USB input.

• 1000 programmes.

- OSD menu system.

- Scart socket for external devices (such as video, video games, audio set, etc.).

- Stereo sound system.

- Teletext, fastext. TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Automatic power down after up to six hours.

- Sleep timer

• Child lock

• Automatic sound mute when no transmission.

• NTSC playback

• AVL (Automatic Volume Limiting).

- PLL (Frequency Search).

• PC input.

- Plug&Play for Windows 98, ME, 2000, XP, Vista, Windows 7.

• Game Mode (optional).

- Picture off function.

Viewing the TV

Front view of a blank flat-screen computer monitor (no text or symbols visible)

Architectural floor plan showing room layouts and furniture layout (no text or labels)

Interior view of a room with furniture layout and a labeled component (no text or symbols visible)

Switch is used for turning the TV on or off.

TV Control button & Operation

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection switch

The Control switch allows you to control the Volume/Programme/Source and Standby-On functions of the TV.

To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down.

To change channel: Press the middle of the button, the channel information banner will appear on screen. Scroll through the stored channels by pushing the button up or down

To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode.

NOTE: You can move the switch, upward or downward to change the volume. If you want to change the channel, press the middle of the switch once (Position 3) and then move upward or downward. If you press the middle of the switch once more, the source OSD will be displayed. To select desired

Viewing remote control - TV

1. Standby
2. Channel list/ back to TV source
3. Sleep timer
4. Telelexi
5. Numeric buttons
6. AV Source selection
7. Green button
8. Red button
9. Mute
10. Volume up/down
11. Info/ reveal (in TXT mode)
12. Menu on/off
13. Navigation button
14. Confirm/ Hold( in TXT mode)
15. Return/Back/Index(in TXT mode)
16. Subtitle on/off
17. Language
18. Play, stop, rapid reverse, rapid advance
19. Pause(in media browser mode)
20. No function
21. Electronic program guide
22. Image size
23. My button1 (^)
24. My button 2 (**)
25. Exit
26. Navigation buttons
27. Navigation buttons
28. Navigation buttons
29. Quick menu
30. Programme up/down
31. Blue button
32. Yellow button
33. Swap
34. Media Browser
35. No function

Using My button 1 (*)
Press MY BUTTON 1 for five seconds when on a desired source, channel or link, until the "MY BUTTON IS SET" message is displayed on the screen. This confirms that the selected MY BUTTON is now associated with the selected function.

Viewing the Connections

Connector Type Cables Device
	Scart Connection (back)
	VGA Connection (back)
	PCYPbPr Audio Connection (side)	Side Audio Video Connection Cable (Switched)	PC Audio Cable (Net supply)
	HDMI Connection (back)
[TAH21]
[28Y7]	SPDIF Connection (back)
	Side AV Connection (side)
		AV Connection Cable (Input)
	Headphone Connection (side)
[SZ6G]
	YPbPr Video Connection (back)
		PC to YPbPr Connection Cable (Not applied)
	USB Connection (side)
	CI Connection (side)

Connections

Connector Type Cables Device
	Scart Connection (back)
	VGA Connection (back)
SIDE AV
	PCYPbPr Audio Connection (side)
	HDMI Connection (back)
	SPDIF Connection (back)
SIDE AV
	Side AV Connection (side)
HEADPHONE
	Headphone Connection (side)
	YPbPr Video Connection (back)
	USB Connection (side)
	CI Connection (side)

[Non-Text]

Connector Type Cables Device
	Scart Connection (back)
	VGA Connection (back)
SIDE AV
	PCYPbPr Audio Connection (side)
	HDMI Connection (back)
	SPDIF Connection (back)
SIDE AV
	Side AV Connection (side)
HEADPHONE
	Headphone Connection (side)
	YPbPr Video Connection (back)
	USB Connection (side)
	CI Connection (side)

NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection. See the illustrations above. | YPbPr can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable (YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source. To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION WHITE & RED INPUTS.

Using a Conditional Access Module

IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF.

In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI slot of your TV.

1. Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure

2. Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV.

3. The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

4. Connect the TV to the mains supply, switch on and then wait for few moments until the card activated.

5. When no module is inserted, 'No Common Interface module detected' message appears on the screen.

You can refer to the module instruction manual for details of the settings.

Standby Notifications

If the TV does not receive any input signal (e.g. From an aerial or HDMI source) for 5 minutes, the TV will go into standby. When you next switch-on the TV, the following message will be displayed:

When the Auto Tv Off timeout is reached, the following message will be displayed on the screen. Select YES to shut down the TV. Select NO to cancel. The TV will switch off as well, if you do not make a selection on this screen.

If the TV has been left on and not been operated for 4 hours, the TV will go into standby. When you next switch-on, the following message will be displayed:

Installing the Batteries to the Remote

1. Lift the cover on the back of the remote upward gently.
2. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity.
3. Replace the cover.

Diagram of a battery cell with positive and negative terminals, showing internal structure (no text or symbols)

Connect Power & Antenna/Cable

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC 50 Hz. Switch the "11tion on the bottom right hand side under the screen to position "|" so the TV will switch to standby mode. Then the standby LED lights up.

To switch on the TV from standby mode either:
- Press the "Button, P+ / P- or a numeric button on the remote control.
- Press and hold the control switch on the left hand side of the TV.

To Switch the TV to Standby

To switch the TV to low power stand by press the "button on the remote control or press and hold the control switch on the left hand side of the TV.

Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search. Over Air Download or Timer is active.

To Switch the TV Off

Switch the * button on the bottom right hand side under the screen to position 2 as illustrated to the TV will switch off.

To power down the TV completely, unplug the power cord from the mains sockel.

First Time Installation

When turned on for the first time, the "language selection" menu appears. The message "Welcome please select your language!" is displayed in all language options listed alphabetically.

Press the "or" button to highlight the required language, press OK button to select. "First Time Installation" appears. Use "< or" button to set the required country, and press "button to select Search Type. Use "< or" to set the desired search type. Available search types are Digital and analog, digital only and analog only. When set, press "to select Teletext Language. Use "< or" button to set the "Teletext Language" and select "Scan Encrypted" using "or" button. You can set Scan Encrypted as Yes if you want to scan coded stations.

Dealult PIN code can change depending on the selected country.

If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234.

Press OK button on the remote control to continue and the following message will be displayed on the screen

You can activate Store mode (Optional) option by using 'or' button. If Store Mode is selected, Store mode (Optional) option will be available in other settings menu and your TV's features will be illustrated on the top of the screen. A confirmation screen will be displayed after selecting the Store Mode. Select YES to proceed.

If Home Mode is selected, Store mode (optional) will not be available after the First Time Installation. Press OK button on the remote control to continue and the following message will be displayed on the screen.

You must select a search type to search and store broadcasts from the desired source.

Aerial Installation

If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts.

After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN(*), please select 'Yes' and then press OK.

Press OK button to quit channel list and watch TV. (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence.

Cable Installation

If you select CABLE option and press OK button on the remote control to continue, the following message will be displayed on the screen:

To continue please select YES and press OK. To cancel operation, select NO and press OK.

You can select frequency ranges from this screen. For highlighting lines you see, use "√" or " " button.

You can enter the frequency range manually by using the numeric buttons on the remote control.

Set Start and Stop Frequency as desired by using numeric buttons on the remote control.

After this operation, you can set Search Step as 8000 KHz or 1000 KHz.

If you select 1000 KHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly. When finished, press OK button to start automatic search. The TV will search and store available broadcasts.

(*) Network option will not be available for UK.

Media Playback via USB Input

You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV. This feature allows you to play files stored in a USB drive. 2.5" and 3.5" inch (hold with external power supply) external hard disk drives are supported.

IMPORTANT! You should back up your files before making any connections to the TV set in order to avoid any possible data loss. Manufacturer will not be responsible for any file damage or data loss. It is possible that certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV. Note: While formatting a USB hard disk that has 1TB (Tera Byte) or more file capacity, you can experience problems with the formatting process.

Quickly plugging and unplugging USB devices, is a very hazardous operation. Do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and USB device itself. Do not pull out USB module while playing a file.

You can use USB hubs with your TV's USB inputs. External power supplied USB hubs are recommended in such a case.

It is recommended to use the TV's USB input(s) directly, if you are going to connect a USB hard disk. Media Browser Menu

You can play photo, music, and movie files stored on a USB disk by connecting it to your TV and using the Media Browser screen. To do this, perform the following: Connect a USB disk to one of the USB inputs located on the side of the TV.

Press MENU button and select Media Browser tab by using Left/Right and OK buttons. Main media browser screen will be displayed. You can display the related content by selecting the Video, Music or Picture tab. Follow the button indications under each on screen menu for media playback features.

You can set your Media Browser preferences by using the Settings dialog.

Using MENU button in Media Browser Mode

Pressing MENU button in Media Browser mode displays the following menu screen:

You can access Picture, Sound and Settings menu options using this screen. Press MENU again to exit from this screen.

Changing Image Size: Picture Formats

Programmes can be watched in different picture formats, depending on the transmission received. You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom

modes. Press "Button repeatedly to change the image size. You can shift the screen up or down by using "or" buttons while in, 14:9 Zoom, Cinema or Subtitle.

Using the Channel List

Edit Channel List
1. I OK ONE	OK	○
1. I OK TWO	—	OK
1. I OK THREE	OK	○
TO. I OK CANCEL	OK	○
NO. I OK NEWS	OK	○
NO. BIG	OK	○

active stations to be listed by using the Channel List options. Press MENU button to view main menu. Select Channel List item by using Left or Right button. Press OK to view menu contents. Select Edit Channel List to manage all stored channels. Use Up or Down and OK buttons to select Edit Channel List. Press Up or Down button to select the channel that will be processed. Press Left or Right button to select a function on Channel List menu. Use P+/P- buttons to move page up or down. Press MENU button to exit.

Sorting Channel List

You can select broadcasts to be listed in the channel list. To display specific types of broadcast, you should use Active channel list setting. Select Active channel list from the Channel list menu by using "or" button. Press OK button to continue. You can select a network type option from the list by using "or" and OK buttons.

Quick Menu

Quick Settings menu allows you to access some option quickly. This menu includes Power Save Mode, Picture Mode, Equalizer Settings, Favourites and Sleep Timer options. Press Q.MENU button on the remote control to view quick menu. See the following chapters for the details of the listed features.

Electronic Programme Guide (EPG)

Some, but not all channels send information about the current and next programmes. Press the "button to view the EPG menu.

Up/Down/Left/Right: Navigate EPG.

OK: Displays programme options.

INFO: Displays, in detail information on programme selected.

GREEN: Switches to List Schedule EPG.

YELLOW: Switches to Timeline Schedule EPG.

BLUE: displays filtering options.

Menu Features and Functions

Picture Menu Contents
Mode	For your viewing requirements, you can set the related mode option. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Contrast	Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour	Sets the colour value, adjusting the colors.
Power Save Mode	To set Power Save Mode as Eco, Picture Off and Disabled. See the section, "Environmental Information" in this manual for further information on Power Save Mode.
Backlight (optional)	This setting controls the backlight level and it can be set to Auto, Maximum, Minimum and Eco Mode. Backlight function will be inactive if Power Save Mode is set to On. Backlight cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game.
Noise Reduction	If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Noise Reduction can be set to one of these options: Low, Medium, High or Off.
Advanced Settings
Dynamic Contrast	You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set to one of these options: Low, Medium, High or Off.
Colour Temp Sets the desired colour tone.
Picture Zoom	Sets the picture size to Auto, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching).
HDMI True Black	While watching from HDMI source, this feature will be visible in the Picture Settings menu. You can use this feature to enhance blackness in the picture.
Film Mode	Films are recorded at a different number of frames per second to normal television programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly.
Skin Tone	Adjust the desired skin tone.
Colour Shift Adjust the desired colour tone.
RGB Gain	Press OK button to edit RGB gain. You can configure the colour temperature values using the RGB Gain feature.
Reset	Resets the picture settings to factory default settings.
Autoposition (in PC mode)	Automatically optimizes the display. Press OK to optimize.
H Position (in PC mode)	This item shifts the image horizontally to right hand side or left hand side of the screen.
V Position (in PC mode)	This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock (in PC mode)	Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Menu Features and Functions

Sound Menu Contents
Volume	Adjusts volume level.
Equalizer:	In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the MENU button to return to the previous menu. Equalizer menu settings can be changed manually only when the Equalizer Mode is in User.
Balance This setting is used for emphasizing left or right speaker balance.
Headphone Sets headphone volume.
Sound Mode	You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports that mode.
AVL	Automatic Volume Limiting (AVL) function sets the sound to obtain fixed output level between programmes (For instance, volume level of advertisements tend to be louder than programmes).
Headphone/Lineout (Optional)	When you connect an external amplifier to your TV using the headphone jack, you can select this option as Lineout. If you have connected headphones to the TV, set this option as Headphone.
Dynamic Bass (Optional)	Enables or disables the Dynamic Bass.
Surround Sound (Optional)	Surround sound mode can be changed as On or Off.
Digital Out	Sets digital cut audio type.
Install and Retune Menu Contents
Automatic Channel Scan (Retune)	Displays automatic tuning options.Digital Aerial: Searches and stores aerial DVB stations.Digital Cable: Searches and stores cable DVB stations.Analogue: Searches and stores analogue stations.Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.
Manual Channel Scan	This feature can be used for direct broadcast entry.
Network Channel Scan (Optional)	Searches for the linked channels in the broadcast system.
Analogue Fine Tune	You can use this setting for fine tuning analogue channels. This feature is not available if no analogue channels are stored.
	Deletes all stored channels and settings, resets TV to factory settings and

Menu Features and Functions

Settings Menu Contents
Conditional Access	Controls conditional access modules when available.
Language	Configures language settings.
Parental	Configures parental settings.Deafuit PIN code can change depending on the selected country.If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234.
Timers	Sets timers for selected programmes.
Date/Time	Sets date and time.Note:* The TV takes the time info via the broadcast. Correct time will be available on Date/Time Settings, if the time info is provided in the broadcast.If the TV is in no channel mode, Date/Time settings can be changed. However, if there is a channel preset, only "Time Settings Mode" can be changed and if this is set to Manual, Time Zone will be enabled.* If the TV is switched to standby mode and switched on later and there is no broadcasts available, time information will not be updated. If there is a present broadcast; however, time information will be taken via the broadcast. In other words, time information will be available according to those priorities: The TV first looks for the time info in the broadcast, then to the user preference, and lastly to the teletext time information.
Sources	Enables or disables selected source options.
Network Settings (Optional)	Displays network settings.
Other Settings: Displays other setting options of the TV set:
Menu Timeout	Changes timeout duration for menu screens.
Scan Encrypted	When this setting is on, search process will locate the encrypted channels as well. If it is set as Off, encrypted channels will not be located in automatic search or manual search.
Blue Background	Activates or deactivates blue background system when the signal is weak or absent.
Software Upgrade	To ensure that your TV always has the most update information, you can use this setting. In order for the proper operation, please ensure that the TV is set to standby mode.
Application Version	Displays application version.
Hard of Hearing	If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals.
Audio Description	Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. You can use this feature, only if the broadcaster supports that additional narration track.
Auto TV Off	You can set the timeout value of auto off feature. After the timeout value is reached and the TV is not operated for selected time , the TV will go off.
Standby Search	If you change Standby Search to Off, this function will be unavailable. To use Standby search please make sure that you select Standby Search as On. If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will be searched.

Menu Features and Functions

Other Settings: Displays other setting options of the TV set:
Store Mode (optional)	If you are displaying the TV in a store, you can activate this mode. While Store Mode is enabled, some items in the TV menu may not be available to be set.
Power Up Mode	This setting configures the power up mode preference. Always On: The TV always switches on when main on/off button is pressed. / Standby: The TV always powers up in Standby mode. / Last State: The TV always switches on with the last selected channel/source.
Virtual Remote (optional)	Enables or disables the virtual remote feature.

Teletext

"Teletext / Mix: Activates teletext mode when pressed once. Press again to place the teletext screen over the programme (mix). Pressing again will quit the teletext mode.

"BACK" Index: Selects the teletext index page.

"I" Reveal: Shows hidden information (e.g. solutions of games).

"OK" Hold: Holds a text page when convenient. Press again to resume.

Subcode Pages: Selects subcode pages if available when the teletext is activated.

P+I-P- and numbers (0-9): Press to select a page. Note: Most TV stations use code 100 for their index pages. Your TV supports both FASTEXT and TOP text systems. When these systems are available, the pages are divided into groups or topics. When FASTEXT system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button that corresponds to with your needs. The coloured writings will appear, showing you which coloured buttons to use when TOP text transmission is present. Pressing * * * * commands will request the next or previous page respectively.

Digital Teletext (for UK only)

- Press the "button. The digital teletext information appears. Operate it with the coloured buttons, cursor buttons and OK button.

The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on digital teletext screen.

When the "button" is pressed again, the TV returns to television broadcasting.

Software Upgrade

Your TV is capable of finding and updating new software upgrades over broadcast channels. For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels.

1) Software upgrade search via user

interface

- It is possible manually to check if there is a new software upgrade for your TV set.

- Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.

- In Upgrade Options menu select Scan for upgrade and press OK button.

- If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download progress. When download completes with success a message is displayed for reboot to activate new software. Press OK to continue with the reboot operation.

2) 3.AM search and upgrade mode

- If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast channels for new software upgrade. If new software is found and downloaded successfully, with next power up TV opens with new software version. Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is finished successfully. During reboot TV makes first initialization. In reboot sequence panel power is closed and front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.

• If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few times more. If your set still can not operate, please call the service personnel to fix the problem for you.

Caution: While led is blinking during reboot do not unplug your TV's power. Doing this may cause your TV not to re-open again and can only be fixed by service personnel.

Manual Software Update

Ensure that the ethernet cable is connected to your

Menu -> Settings -> Network Settings -> Configuration Status -> Connected

Go to Settings tab from the main menu and select Other Settings. Highlight Software Upgrade and press OK.

Select Scan for Upgrade and press OK button. An OSD screen including the progress bar will be visible under the Software upgrade* title.

A warning screen will be displayed on the screen stating that the TV will be rebooted. Press OK button to finalize upgrade process and reboot TV.

Troubleshooting & Tips

Image persistence - ghosting

Please note that ghosting may occur while displaying a persistent image (still or paused image). TVs' image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture mode for extended periods.

No power

If your TV has no power, please check the power cord plug is connect to the mains power socket.

Poor picture

1. Have you selected the correct TV system?
2. Is your TV or house aerial located too close to a non-earthed audio equipment or neon lights, etc.?
3. Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable?
4. Check if you have entered the correct frequency.
5. Please return the channels.
6. The picture quality may degrade when two devices are connected to the TV at the same time. In such a case, disconnect one of the devices.

No picture

1. No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.
2. Is the aerial connected properly?
3. Are the plugs connected tightly to the aerial socket?
4. Is the aerial cable damaged?
5. Are suitable plugs used to connect the aerial?

No sound

1. Has the TV been set to mute? To cancel mute, press the button, or increase the volume level.
2. Sound is coming from only one speaker. Is the balance set to one extreme? See Sound Menu section.

Remote control - does not operate

Your TV no longer responds to the remote control. The batteries may be exhausted, if so you can still use the control buttons on the TV. (* Is only possible if they are not blocked by parental control.)

Input sources - can not be selected

1. If you cannot select an input source, it is possible that no device is connected.
2. Check the AV cables and connections if you have tried to connect a device.

Information for Users on Disposal of Old Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery contains Iesd.

PC Typical Display Modes

The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions. Your TV supports up to 1920x1200.

Index Resolution Frequency
1	x400 7GHz
2	x350 85Hz
3	x400 85Hz
4	x180 60Hz
5	x400 88Hz
6	x480 72Hz
7	x180 79Hz
8	x480 89Hz
9	x800 5kHz
10	x600 60Hz
11	x600 70Hz
12	x600 72Hz
13	x600 75Hz
14	x600 85Hz
15	x624 75Hz
16	x4768 80Hz
17	x4768 88Hz
18	x4768 70Hz
19	x4768 72Hz
20	x4768 75Hz
21	x4768 85Hz
22	x2x864 60Hz
23	x2x864 70Hz
24	x2x864 75Hz
25	x2x864 85Hz
26	x2x870 75Hz
27	10x798 60Hz
28	10x798 50Hz
29	10x798 75Hz
30	10x798 85Hz
31	10x960 60Hz
32	10x960 75Hz

38	00x1050 75Hz
39	00x1050 85Hz
40	10x900 60Hz
41	10x900 75Hz
42	10x1200 60Hz
43	10x1050 60Hz
44	20x1080 60Hz
45	10x1200 60Hz

Specifications

TV BROADCASTING

PAL/SECAM B/G D/K K' M'L/L'

DIGITAL RECEPTION

DVB-T MPEG2

DVB-T MPEG4 HD

DVB-T MHEG-5 Engine (for UK only)

DVB-C MPEG2

DVB-C MPEG4 HD

RECEIVING CHANNELS

VHF (BAND I/III)

UHF (BAND U)

HYPERBAND

NUMBER OF PRESET CHANNELS

1000

CHANNEL INDICATOR

On Screen Display

RF AERIAL INPUT

75 Ohm (unbalanced)

OPERATING VOLTAGE

220-240V AC, 50 Hz

AUDIO

German + Nicam Stereo

AUDIO OUTPUT POWER (W _FNS ) (10% THD) 2 x 8

POWER CONSUMPTION (W) 100 W (max)

PANEL 16:9

Licence Notifications

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

DOLBY

DIGITAL PLUS and the double-D symbol are trademarks of Dolby Laboratories.

"HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering and disassembly are prohibited.

Supported File Formats for USB Media Browser

Media Extension Format Notes
Movie	mpg, mpeg	Mpeg1,2 MPEG1/2 Layer 1/2	3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM	1080P@ 30fps 50Mbit/sec
	dat, mpg, mpeg	MPEG2, H.264, VC1, AVS, MVC	MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM	H.264:1080Px2@25fps 1080P@ 50fps MVC; 1080P@ 24fps Other; 1080P@ 30fps 50Mbit/sec
	vob MPEG2	MPEG1/2 Layer 1/2/3, AC3.	LPCM 1080P@ 30fps 50Mbit	sec
	mkv MPEG	1,2,4, XviD, H.264, VC1,WMV3, Motion JPEG	MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM	H.264:1080Px2@25fps 1080P@ 50fps Other; 1080P@ 30fps 50Mbit/sec
	mp4 .mov	MPEG1/2 Layer 3, AAC/HEAAC, Motion JPEG	AC3/EAC3, LPCM/ADPCM	H.264: 1080Px2@25fps 1080P@ 50fps Other; 1080P@ 30fps 50Mbit/sec
	avi MPEG1	2,4XvidH.264, VC1,WMV3, Sorenson H.263Motion JPEG	MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM, WMA	H.264: 1080Px2@25fps 1080P@ 50fps Other; 1080P@ 30fps* 50Mbit/sec
	fix H.264,	Sorenson H.263	MPEG1/2 Layer 3, AAC/HEAAC, LPCM/ADPCM	H.264: 1080Px2@25fps 1080P@ 50fps Other; 1080P@ 30fps* 50Mbit/sec
	3gp.3g2 MPEG	H.264, H.264 1920x1080 @ 30P		20Mbit/sec
	asf, wmv MPEG	PEG2,4, XviD, H.264, VC1,WMV3	MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM, WMA	1080P@ 30fps 50Mbit/sec
Music	3		MPEG1 Layer 1/2/3 (MP3)
	wmv		LPCM
	WMA/ASF WMA, WMA Pro
	mla/ .asc AAC, HEAAC
Photo	jpg jpeg	Baseline JPEG		MAX WxH = 14592x12266Up to 8 MegaByte
	png	Progressive JPEG
	.bmp	non-interlace
	png	interlace

Supported DVI Resolutions

When connecting devices to your TV's connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.

	58Hz 60Hz	68Hz 70Hz 72Hz 75Hz
640x400				☑
640x180		☒ ☑	☑ ☑
800x800	☒ ☑	☒ ☑ ☑
832x824						☑
1224x786		☒ ☑	☒ ☑ ☑
1152x864		☒ ☑	☒
1152x870						☑
1283x786		☒
1363x786		☒				☑
1283x980		☒				☑
1280x1024		☒				☑
1400x1050		☒				☑
1443x900		☒				☑
1600x1200		☒
1680x1050		☒
1920x1080		☒
1920x1200		☒

Innehåll

Front view of a blank flat-screen computer monitor (no text or symbols visible)

Architectural floor plan showing room layouts and furniture layout (no text or labels)

Interior layout diagram of a room with furniture and appliances (no text or labels visible)

Diagram of a cylindrical device with two labeled terminals and light rays, no readable text or symbols present.

Anslut ström & antenn/kabel/satellit

PAL/SECAM B/G D/K K' M'L/L'

DIGITAL MOTTAGNING

DVB-T MPEG2

DVB-T MPEG2 HD

DVB-T MHEG-5 MOTOR (endast Storbritannien)

DVB-C MPEG2

DVB-C MPEG4 HD

MOTTAGNA KANALER

VHF (BAND VIII)

UHF (BAND U)

HYPERBAND

ANTAL FÖRINSTÄLLDA KANALER

1000

KANALINDIKATOR

Visning på skärmen

RF ANTENNINGANG

75 Ohm (obalancerat)

DRIFTSPÄNNING

220-240V AC, 50 Hz

LJUD

	BHND	K	Standard power consumption (Watt)	Oil mode power consumption (Watt)	Energy consumption (gpd)
English	Gross energy consumption (GWh)	Gross energy consumption (GWh) and Energy consumption (Watt)	-	-	-
Europe	European energy consumption (GWh)	Global energy consumption (GWh) and Global energy consumption (Watt)	-	-	-
Africa	Africa's energy consumption (GWh)	Global energy consumption (GWh) and Global energy consumption (Watt)	-	-	-
Asia	Asia's energy consumption (GWh)	-	-	-	-
Americas	Americas's energy consumption (GWh)	-	-	-	-
Africa	Africa's energy consumption (GWh)	-	-	-	-
Americas	Americas's energy consumption (GWh)	-	-	-	-
Africa	Americas's energy consumption (GWh)	-	-	-	-
Americas	Americas's energy consumption (GWh)	-	-	-	-
Africa	Americas's energy consumption (GWh)	-	-	-	-
Americas	Americas's energy consumption (GWh)	-	-	-	-
Africa	Americas's energy consumption (GWh)	-
Americas	Americas's energy consumption (GWh)	-	-	-	-
Africa	Americas's energy consumption (GWh)	-	-	-	-
Americas	Americas's energy consumption (GWh)	-	-	-	-
Africa	Americas's energy consumption (GWh)	-	-	-	-
Americas	Americas's power consumption (GWh)	-	-	-	-
Africa	Americas's power consumption (GWh)	-	-	-	-
Americas	Americas's power consumption (GWh)	-	-	-	-
Americas	Americas's power consumption (GWh)	-	-	-	-
Americas	Americas's power consumption (GWh)	-	-	-	-
Americas	Americas's power consumption (GWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	(1)	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas	Americas's power consumption (SWh)	-	-	-	-
Americas

SKANTIC