CDL-1200 - Drill Ozito - Free user manual and instructions
Find the device manual for free CDL-1200 Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Cordless Drill |
| Brand | Ozito |
| Model | CDL-1200 |
| Voltage | 12 V DC |
| Chuck Type | 10 mm Keyless |
| No-Load Speed | 0 – 650 rpm |
| Max Torque | 20 Nm |
| Battery Type | Li-ion 1.5 Ah |
| Charger Included | Yes |
| Weight | 1.2 kg |
| Dimensions (L x W x H) | 200 x 200 x 60 mm |
| Forward/Reverse | Yes |
| LED Light | Yes |
| Ergonomic Grip | Yes |
| Belt Clip | No |
| Maximum Drilling Capacity (Steel) | 10 mm |
| Maximum Drilling Capacity (Wood) | 20 mm |
| Maintenance | Clean with dry cloth; store in a dry place. Avoid moisture. Do not immerse in water. |
| Safety Precautions | Read the manual before use. Wear safety goggles and ear protection. Keep loose clothing away from moving parts. |
| Spare Parts Availability | Chuck, battery, charger, and other parts available through authorized retailers. |
| Reparability | User-replaceable parts: battery, chuck, brushes. Professional repair recommended for motor issues. |
| Warranty | 2 years (check local terms) |
Frequently Asked Questions - CDL-1200 Ozito
How do I change the drill bit on the Ozito CDL-1200?
To change the drill bit, first ensure the drill is off and the battery is removed. Hold the chuck sleeve and rotate it counterclockwise to open the jaws. Insert the bit and tighten by rotating clockwise until secure.
How do I charge the battery for the CDL-1200?
Use the included charger. Plug the charger into a power outlet, then slide the battery onto the charger until it clicks. The charge indicator will light up. Once fully charged, remove the battery from the charger. Do not overcharge.
Why is my Ozito CDL-1200 drill not turning on?
First, ensure the battery is charged and properly inserted. Check that the forward/reverse switch is not in the middle lock position. If the battery is hot, let it cool down. If the problem persists, contact customer service.
Can I use the CDL-1200 as a screwdriver?
Yes, the drill has a clutch with multiple torque settings. Adjust the torque ring to a lower setting for driving screws to avoid over-tightening. Use a screwdriver bit in the chuck.
How should I clean and maintain my Ozito drill?
After use, wipe the drill with a dry cloth to remove dust. Do not use water or solvents. Keep the ventilation slots clear. Inspect the chuck and battery contacts periodically for debris. Store in a dry place.
What is the voltage of the Ozito CDL-1200?
The CDL-1200 is a 12V cordless drill. It uses a 12V lithium-ion battery.
How do I replace the chuck on the CDL-1200?
To replace the chuck, remove the battery. Use a hex key (usually 4mm) to turn the chuck's retaining screw clockwise (left-hand thread) to remove it. Then unscrew the chuck from the spindle. Reverse to install the new chuck.
Are the batteries interchangeable with other Ozito tools?
Yes, the 12V battery is part of Ozito's Power X Change system. It is compatible with other 12V Ozito cordless tools.
What is the warranty period for the Ozito CDL-1200?
The standard warranty is 2 years from the date of purchase. Register your product online to extend coverage. Proof of purchase is required.
How should I store my Ozito drill when not in use?
Remove the battery and store it separately. Keep the drill in a cool, dry place away from direct sunlight. Avoid extreme temperatures. Use a case or tool bag to protect it from dust and impact.
User questions about CDL-1200 Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual CDL-1200 - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CDL-1200 by Ozito.