PC800 - Battery charger Projecta - Free user manual and instructions
Find the device manual for free PC800 Projecta in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Battery charger |
| Brand | Projecta |
| Model | PC800 |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Output Voltage | 12 V or 6 V (selectable) |
| Charging Current | 8 A (max) |
| Battery Compatibility | Lead-acid (flooded, AGM, gel) batteries |
| Charging Stages | Automatic 3-stage: bulk, absorption, float |
| Protection Features | Reverse polarity, overcharge, short circuit, overheating |
| Display | LED indicators for power, charging, full, and fault |
| Cable Length | 1.8 m (input), 1.5 m (output) |
| Accessories Included | Battery clamps, ring terminals, user manual |
| Dimensions | 200 x 150 x 80 mm |
| Weight | 1.5 kg |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE, RoHS |
| Maintenance | Keep dry and clean; check terminals periodically |
Frequently Asked Questions - PC800 Projecta
What type of batteries can the PC800 charge?
The Projecta PC800 is designed for lead-acid batteries, including flooded, AGM, and gel types. It supports 6V and 12V batteries, suitable for cars, motorcycles, and marine use.
How long does it take to charge a battery?
Charging time depends on battery capacity and discharge level. For example, a 50Ah battery may take approximately 6-8 hours with the 8A output. The automatic 3-stage charging optimizes time and safety.
Is it safe to leave the charger connected overnight?
Yes, the PC800 features float mode that maintains the battery at full charge without overcharging. It is safe for long-term connection as it prevents damage.
Can it charge a completely dead battery?
It can charge a battery with very low voltage, but if the battery voltage is below 1V, the charger may not detect it. For dead batteries, try a manual mode if available, or use a separate recovery step.
What do the LED indicators mean?
Power: Lights when connected to mains. Charging: Lights during charging. Full: Lights when battery is fully charged. Fault: Lights for reverse polarity or other errors.
Can I use the PC800 for a lithium battery?
No, the PC800 is specifically designed for lead-acid batteries. Using it on lithium batteries may cause damage or safety risks. Use a charger with lithium profile instead.
What is the warranty period?
Projecta typically offers a 2-year warranty from the date of purchase. Check your local dealer or the manual for specific terms.
How do I clean and maintain the charger?
Disconnect from power and battery. Wipe with a dry cloth. Avoid water or solvents. Store in a cool, dry place when not in use.
The charger shows a fault light, what should I do?
Check for reverse polarity (clamps wrong way). If correct, check battery voltage is above 1V and connections are clean. Reset by unplugging for 10 seconds.
Can I charge a battery while it is still in the vehicle?
Yes, but ensure the vehicle's ignition is off and all electronics are switched off. Connect the positive clamp to the battery positive and negative to chassis ground (except for negative ground systems).
User questions about PC800 Projecta
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual PC800 - Projecta and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PC800 by Projecta.