BLT700 - Battery charger Projecta - Free user manual and instructions
Find the device manual for free BLT700 Projecta in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Projecta |
| Model | BLT700 |
| Input Voltage | 230 V AC, 50 Hz |
| Output Voltage | 6 V / 12 V selectable |
| Charging Current | 7 A (max) |
| Battery Types | Lead-acid (wet, gel, AGM) |
| Battery Capacity Range | 20 Ah to 140 Ah |
| Dimensions (L x W x H) | 190 x 130 x 85 mm |
| Weight | 0.8 kg |
| Charging Algorithm | Automatic constant current/constant voltage (IU) |
| Protection Features | Reverse polarity, overcharge, short circuit, overheat |
| Display Type | LED indicators (power, charging, full, error) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 60°C |
| Housing Material | ABS plastic |
| Warranty | 2 years |
| Package Contents | Charger, battery clamps, manual |
| Maintenance | Keep clean, dry; check cables for damage |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Spare Parts Availability | Fuse, clamps (contact support) |
| Reparability | Repairable by qualified technician |
Frequently Asked Questions - BLT700 Projecta
What types of batteries can the Projecta BLT700 charge?
The Projecta BLT700 is designed for 6V and 12V lead-acid batteries, including wet, gel, and AGM types.
How do I know when the battery is fully charged?
The charger has a green LED indicator that lights up when charging is complete. The automatic mode switches to float charge to maintain the battery.
Can I leave the charger connected indefinitely?
Yes, the BLT700 features automatic float charging after full charge, so it can be left connected for long periods without overcharging.
What does the red LED error mean?
The red LED indicates a fault condition, such as reverse polarity, short circuit, or overheating. Disconnect immediately and check connections.
Is this charger suitable for motorcycle batteries?
Yes, as long as the battery capacity is between 20 Ah and 140 Ah. For smaller batteries, a lower current charger is recommended.
How do I clean the BLT700 charger?
Unplug the charger and wipe it with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.
What safety features does the charger have?
The charger includes reverse polarity protection, overcharge protection, short circuit protection, and thermal overload shutoff.
Can I charge a frozen battery?
No, do not charge a frozen battery. Allow it to thaw to room temperature before charging to avoid damage.
How do I replace the fuse?
Refer to the manual for fuse type. The fuse is located in the 12V output lead. Always replace with the same rating.
What should I do if the charger gets hot?
The charger may warm up during use; if it becomes excessively hot, disconnect and allow to cool. Ensure adequate ventilation and reduce ambient temperature.
User questions about BLT700 Projecta
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual BLT700 - Projecta and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BLT700 by Projecta.