BR903GCX-1F - Range hood Bellini - Free user manual and instructions
Find the device manual for free BR903GCX-1F Bellini in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Bellini |
| Model | BR903GCX-1F |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 60-110 cm (adjustable) |
| Weight | 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 300 W |
| Lighting | 2 x 3 W LED |
| Number of Speeds | 3 + boost |
| Extraction Capacity | 650 m³/h |
| Noise Level | 55 dB (min speed) |
| Filter Type | Aluminum grease filter (dishwasher safe) |
| Charcoal Filter | Optional for recirculation mode |
| Control Type | Push buttons |
| Ducting | 150 mm diameter outlet |
| Mounting | Wall-mounted (under cabinet) |
| Maintenance | Clean grease filter monthly; replace charcoal filter every 3-6 months |
| Safety Features | Thermal cut-off, auto shut-off |
| Spare Parts | Grease filters, charcoal filters, LED bulbs |
| Repair Index | 8.5/10 (easily serviceable) |
| Warranty | 2 years |
Frequently Asked Questions - BR903GCX-1F Bellini
How do I install the Bellini BR903GCX-1F range hood?
Installation requires a wall mounting bracket and a 150 mm duct outlet. Refer to the manual for exact measurements. Ensure the hood is at least 65 cm above gas hobs or 50 cm above electric hobs.
Can I use this hood in recirculation mode?
Yes, you need to purchase a charcoal filter separately. This mode recirculates air back into the kitchen after filtering.
How often should I clean the grease filter?
Clean the aluminum grease filter every month using warm soapy water or a dishwasher. This prevents grease buildup and maintains efficiency.
How do I replace the charcoal filter?
The charcoal filter should be replaced every 3-6 months. Remove the grease filter first, then slide out the old charcoal filter and insert a new one.
What type of light bulbs does this hood use?
It uses LED bulbs (3 W each). To replace, gently pry off the light cover and twist the bulb to remove. Insert a new bulb of the same type.
Why is my range hood making excessive noise?
Check if the grease filter is clogged or if there is an obstruction in the ducting. Clean the filter and ensure the duct is not blocked. Also, verify the hood is securely mounted to avoid vibrations.
Does this hood require a dedicated electrical circuit?
It should be connected to a dedicated 10-amp circuit with proper grounding to avoid overloading.
Can I operate the hood without a filter?
No, operating without filters can damage the motor and void warranty. Always install both grease and charcoal filters when in use.
What is the recommended distance between the hob and the hood?
For gas hobs, maintain at least 65 cm. For electric hobs, at least 50 cm. This ensures optimal extraction and safety.
How do I reset the filter saturation indicator?
Press and hold the speed button for 3 seconds until the indicator light turns off. This resets the timer after cleaning or replacing filters.
User questions about BR903GCX-1F Bellini
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual BR903GCX-1F - Bellini and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BR903GCX-1F by Bellini.