BR603CPX-F - Range hood Bellini - Free user manual and instructions
Find the device manual for free BR603CPX-F Bellini in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Bellini |
| Model | BR603CPX-F |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 15-20 cm (adjustable) |
| Weight | 12 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 200 W |
| Number of Speeds | 3 |
| Noise Level | 55-68 dB (depending on speed) |
| Extraction Capacity | 650 m³/h |
| Lighting | 2 x 3 W LED |
| Grease Filter | Aluminum mesh (washable) |
| Carbon Filter | Optional (for recirculation mode) |
| Control Type | Slider buttons |
| Material | Stainless steel |
| Duct Diameter | 150 mm |
| Mounting | Under cabinet or wall-mounted |
| Warranty | 2 years |
Frequently Asked Questions - BR603CPX-F Bellini
How do I install the Bellini BR603CPX-F range hood?
Installation should be performed by a qualified technician. The hood must be mounted at a minimum height of 65 cm above gas hobs or 50 cm above electric hobs. Ensure proper ducting or use carbon filters for recirculation mode.
How often should I clean the grease filter?
Clean the aluminum grease filter every month with warm soapy water or in a dishwasher. A dirty filter reduces performance and may cause fire hazard.
Can the hood operate in recirculation mode?
Yes, by installing optional carbon filters (not included) to absorb odors. The filtered air is then recirculated into the kitchen.
What is the noise level of this hood?
Noise level ranges from 55 dB on low speed to 68 dB on high speed. This is typical for a standard under-cabinet hood.
How do I replace the LED lights?
The LED lights are built-in and should be replaced by a qualified technician. Contact Bellini support for compatible replacement parts.
What is the extraction capacity?
The maximum extraction capacity is 650 m³/h, sufficient for medium-sized kitchens. Lower speeds provide quieter operation.
Why is my hood not working properly?
Check if the power cord is plugged in and the circuit breaker hasn't tripped. Ensure the grease filter is clean and the duct is not blocked. If problems persist, contact service.
How do I switch between extraction and recirculation?
For extraction mode, connect the duct to an external outlet. For recirculation, install carbon filters and remove the duct if present. The hood will then filter and recirculate air.
What is the warranty on this product?
Bellini offers a 2-year warranty covering manufacturing defects. Retain your proof of purchase and install the hood according to the manual.
Can I operate the hood without filters?
No, never operate the hood without the grease filter. It protects the motor from grease buildup and reduces fire risk. Always keep filters in place.
User questions about BR603CPX-F Bellini
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual BR603CPX-F - Bellini and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BR603CPX-F by Bellini.