PMD38 - Detector Pyle - Free user manual and instructions

Product Type	Metal Detector
Brand	Pyle
Model	PMD38
Operating Frequency	6.5 kHz
Detection Modes	All Metal, Discrimination, Pinpoint
Sensitivity Control	Adjustable, 10 levels
Discrimination	Ferrous/Non-ferrous metal identification
Audio Output	Variable tone indicator
Search Coil	8-inch water-resistant coil
Display	LCD with target ID, depth indicator
Power Source	2 x 9V alkaline batteries (not included)
Battery Life	Approximately 20 hours
Dimensions	43 x 9 x 5 inches (collapsed length adjustable)
Weight	2.5 lbs
Waterproof Coil	Yes, submersible up to 1 meter
Headphone Jack	1/4 inch (6.35 mm) stereo
Warranty	1 year limited
Maintenance	Clean with soft damp cloth; avoid solvents
Spare Parts	Replacement coils, batteries, headphones
Safety Precautions	Keep away from pacemakers; turn off near explosive materials

Frequently Asked Questions - PMD38 Pyle

How do I adjust the sensitivity on my Pyle PMD38?

Turn the sensitivity knob clockwise to increase sensitivity or counterclockwise to decrease it. Start at a medium setting and adjust based on ground conditions. Too high sensitivity may cause false signals.

What type of batteries does the PMD38 use?

It uses two 9V alkaline batteries. Insert them into the battery compartment observing polarity. Do not mix old and new batteries.

Can I use the PMD38 in wet grass or rain?

The search coil is water-resistant, but the control box is not. Avoid exposing the control box to moisture. Do not submerge the entire detector.

How do I distinguish between ferrous and non-ferrous metals?

Use the discrimination mode. The detector will emit different tones or display different target IDs for ferrous (iron) and non-ferrous (copper, silver, gold) metals. Refer to the user manual for tone chart.

What should I do if my detector is making erratic noises?

Check for electromagnetic interference from power lines or other devices. Reduce sensitivity, ground balance if possible, or move to a different location. Also ensure batteries are fresh.

How do I pinpoint a target?

Switch to pinpoint mode (if available) or move the coil in a cross pattern over the target area. The detector will give a stronger signal directly over the object.

Is the Pyle PMD38 suitable for beginners?

Yes, it has simple controls and preset modes. It's lightweight and easy to assemble. Ideal for hobbyists and beginners.

Can I use headphones with the PMD38?

Yes, it has a 1/4 inch headphone jack. Plug in any standard metal detecting headphones for better sound isolation.

What is the warranty on the PMD38?

Pyle offers a one-year limited warranty from date of purchase. Keep your receipt for warranty claims.

How do I clean the coil?

Rinse the coil with fresh water after use in saltwater or muddy conditions. Wipe the shaft and control box with a damp cloth. Do not use harsh chemicals.

USER MANUAL PMD38 Pyle

Close-up of a black metal detector with a yellow label and orange tip (no readable text or symbols)

1. Detection
   2、LED(Green/Red Color)
   3、Audio Alert
2. Handle
3. Battery Door)
   6、Low Sensitivity Switch
   7、Power On/Off switch
   8、Rechargeable Battery Socket
   9、Sound or Vibration switch
4. Deep inset sensitivity control

2. Function

1) As electronic security device utilized in airports, security stations and ports.
2) The security check of customs, police, immigration and corrections.
3) As a quality check device used in food and medication manufacture.
4) The security check at sport events, concerts and public gatherings.
5) Precious metals check, such as at a gold and silver factory

4. Feature

1) High sensitivity
2) It is easy and convenient to use, no adjustment necessary
3) The two selectable warning options are sound and vibration.
4) Battery depletion warning : automatic continuous sound or vibration alert
5) The two choices of high or low sensitivity
6) External charging jack.

5. How to Replace Battery

1) Use thumb to push battery cover open (push in direction of arrows)
2) Plug 9V battery into wired receptacle paying attention to polarity (Do not plug device into electric wall adapter if using non-rechargeable alkaline battery. May damage battery and cause injury)
3) Replace battery lid and push tight with thumb

6. Application Method

1) Turn on the switch (7), hear the "tone" sound, 3-5 seconds, power has been turned on, self-test time is completed, you can use unit while green light is lit. If green light is not lit than

4) Low sensitivity test: If you need to exclude the very small metal objects, you can hold down the low sensitivity switch (6). Then conduct exploration sweep around the measured object, alarm will only sound when metal is large enough to detect as the wand sweeps by the object, the alarm will sound or vibrate when near metal. The light will illuminate red when metal is detected. It will return to green and sound or vibration will stop when no metal is near sensor field. Sensitivity is reduced by 5 times when sensitivity switch is activated.

7. Sensitivity Adjustment

1) If the detection range does not meet your requirements or if detection is unstable or too sensitive you should adjust the sensitivity. If units geo-chemical detection detects body parts or other non-metal objects than sensitivity needs to be adjusted. Adjustment can be made by inserting a small flat head electronic screwdriver into hole and turning small neo-stat. Please do not try to adjust sensitivity with an object other than tools specified for the job.

2) Select the sound, vibration switch (9) when released detector will sound, use a small electronic screwdriver in the adjustment hole. When you feel that the screwdriver is seated in adjustment slot turn counter clockwise to increase sensitivity. Turn clockwise to decrease sensitivity. Hold unit next to metal object and listen to alarm until required range is found.

8. Attention