Quartz HP - Range hood ELICA - Free user manual and instructions
Find the device manual for free Quartz HP ELICA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Elica |
| Model | Quartz HP |
| Width | 60 cm |
| Depth | 50 cm |
| Height | 15 cm (built-in) or variable for ducted |
| Weight | 12 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Total Power Consumption | 220 W |
| Maximum Extraction Rate | 650 m³/h |
| Max Noise Level | 65 dB(A) |
| Energy Class | A |
| Lighting | LED, 3 W |
| Filter Type | Aluminum grease filter |
| Charcoal Filter | Optional (recycling mode) |
| Controls | Electronic push buttons |
| Number of Speeds | 3 + boost |
| Air Outlet Diameter | 150 mm |
| Installation | Wall-mounted or ducted |
| Maintenance | Clean grease filter monthly; replace charcoal filter every 4-6 months |
Frequently Asked Questions - Quartz HP ELICA
How do I install the Elica Quartz HP range hood?
Installation must be performed by a qualified technician. Ensure the hood is securely mounted to a wall or cabinet at the recommended height above the cooktop (typically 65-75 cm for electric hobs, 75-85 cm for gas). Connect the ducting (if exhausting outside) or install charcoal filters for recirculation mode. Follow the included manual for detailed steps.
How do I clean the grease filter?
Remove the aluminum grease filter and wash it with warm soapy water or in a dishwasher. Ensure it is completely dry before reinstalling. Clean at least once a month to maintain performance.
What should I do if the hood is not extracting properly?
Check if the grease filters are clean and if the ducting is not blocked. Ensure the charcoal filter (if used) is not saturated. Also verify that the hood is installed at the correct height and that the room has adequate ventilation.
How do I replace the charcoal filter?
Remove the grease filters, then locate the charcoal filter (usually at the motor intake). Unclip or unscrew it and replace with a new one of the same type. Typically, charcoal filters should be changed every 4-6 months depending on usage.
What are the dimensions of the Elica Quartz HP?
The standard width is 60 cm, depth 50 cm, and height 15 cm for the built-in version. For ducted installation, the chimney height is adjustable. Refer to the manual for exact measurements.
Can I use the hood in recirculation mode?
Yes, the Elica Quartz HP can be used in recirculation mode with an optional charcoal filter. This is ideal if ducting to the outside is not possible. The filter should be ordered separately.
How loud is the hood?
The maximum noise level is 65 dB(A) at boost speed. Lower speeds produce less noise, typically around 45-55 dB(A). The actual noise depends on installation and ducting.
Does the hood have a remote control?
Some versions of the Quartz HP may include a remote control. Check the manual or product specifications. If not included, it can be purchased as an accessory.
What is the power consumption of the hood?
The total power consumption is 220 W, with the motor drawing around 200 W and the LED lighting 3 W. It is rated energy class A.
How do I adjust the speed?
Use the electronic push buttons on the front panel. There are 3 speed levels plus a boost mode for maximum extraction. Press the desired speed or boost button.
User questions about Quartz HP ELICA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Quartz HP - ELICA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Quartz HP by ELICA.