HT118 - Heating WHIRLPOOL - Free user manual and instructions

Product Type	Portable Ceramic Heater
Model Number	HT118
Brand	Whirlpool
Power Settings	Low (1000W), High (1800W)
Voltage	120 V, 60 Hz
Temperature Range	50°F (10°C) to 85°F (29°C) or Continuous Heat
Control Type	Knob and Button (POWER, Temperature)
Safety Features	Overheat protection, tip-over switch (automatic shut-off)
Clearance Requirements	At least 3 ft (0.9 m) from front, sides, and rear
Recommended Cleaning	Monthly with a soft, dry cloth; allow to cool first
Storage	Clean and store in original packaging in a cool, dry place
Dimensions (Approx.)	12 x 8 x 10 inches (30.5 x 20.3 x 25.4 cm)
Weight (Approx.)	5 lbs (2.3 kg)
Warranty	1 year limited (contact Whirlpool)

Frequently Asked Questions - HT118 WHIRLPOOL

How do I turn on the Whirlpool HT118 heater?

Plug the heater directly into a wall outlet. Press the POWER button on the control panel or the ON button on the remote control (if provided). Then set the desired heat level using the LOW or HIGH setting.

What is the recommended clearance around the heater?

Keep all combustible materials such as furniture, pillows, bedding, and curtains at least 3 ft (0.9 m) from the front, sides, and rear of the heater.

Can I use an extension cord with this heater?

No. Always plug the heater directly into a wall outlet. Using an extension cord or power strip can cause overheating and fire. The cord may also become a tripping hazard.

How do I clean the heater?

Turn off and unplug the heater. Allow it to cool completely. Wipe the external surface with a soft, dry cloth. Do not use water or cleaning agents. Clean at least once a month.

Why does my heater turn off unexpectedly?

The heater may shut off if the room temperature reaches the set temperature, or if the overheat protection activates. Check that the thermostat is set higher than the current room temperature and that the air intake and exhaust are not blocked. Also ensure the outlet is working.

Is the heater safe to use in a bathroom?

No. The manual states: Do not use this heater in bathrooms, laundry areas, or near water. It is not intended for use in the immediate surroundings of a bath, shower, or swimming pool.

How do I store the heater after the season?

Clean the external surface, pack the heater in its original box if possible, and store in a cool, dry place. Keep packaging materials for seasonal storage.

What does the Temperature Control Knob do?

The knob allows you to set the desired room temperature from 50°F (10°C) to 85°F (29°C). Turn it to Continuous Heat if you want the heater to run without automatic shut-off based on room temperature.

Can the heater be used on a bed or soft surface?

No. The manual warns: Do not use on soft surfaces like a bed where openings may become blocked. Always place on a firm, level, open surface.

What should I do if the cord or plug gets hot?

Check that the plug fits tightly in the outlet. If the plug or outlet is hot, discontinue use and have the outlet replaced by a qualified electrician. The heater draws high current and can cause outlet overheating.

USER MANUAL HT118 WHIRLPOOL

Illustration of a thermometer and stylized human figures with decorative swirls (no text or symbols)

惠而浦

陶瓷電暖器

A. 這轉折不登

C. 匹迪(1000W)

B. 周道(1800W)

D. 開／關

Electrical Requirements 3

Location Requirements 3

PORTABLE HEATER USE....4

Power 4

Temperature 4

PORTABLE HEATER CARE 5

Cleaning 5

Storing 5

TROUBLESHOOTING 5

ASSISTANCE OR SERVICE 5

PORTABLE HEATER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock or injury when using your portable heater, follow these basic precautions:

1. Read all instructions before using this heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surface. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 ft (0.9 m) from the front of the heater and keep them away from the sides and rear.
3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
4. Always unplug heater when not in use.
5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return to authorized service facility for examination and/or repair.
6. Do not use outdoors.

7. This heater is not intended for use in bathrooms, laundry areas and similar Indoor locations. Never locate heater where it may fall into a bathtub or other water container. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over.

9. To disconnect heater, turn controls to off, and then remove plug from outlet.
10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electrical shock or fire, or damage the heater.
11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
12. A heater has hot and arcing or sparking parts inside. Do not use it in an area where gasoline, paint or flammable liquids are used or stored.
13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
14. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
15. Check your heater cord and plug connections. A loose fitting outlet can cause the plug to overheat and / or cause a fire. Be sure plug fits tight in the outlet. Check frequently during use to make sure plug and outlet are not hot. If so, discontinue using heater and have outlet replaced by a qualified electrician.

Note: Heaters draw more current than small appliances, overheating of the outlet may occur even if it has not occurred with the other appliances.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

NOTES:

- Check that there is a 3 ft (0.9 m) minimum clearance on all sides of the portable heater.

■ Remove the heater from the box and remove packaging materials. Keep packaging material for seasonal storage of the portable heater.
■ Place the heater on a firm, level, open surface free from obstructions.

PORTABLE HEATER USE

Power

WARNING

Fire Hazard

Do not use an extension cord.

In order to avoid overheating, do not cover the heater.

Heater must not be located immediately below a socketoutlet.

Doing so can result in death, or fire.

Power and Heat Setting

Temperature

Temperature Control Knob

TEMPERATURE

1. Turn the portable heater on. See the "Power and Heat Setting" illustration.
2. Turn the Temperature knob to the desired temperature setting from 50°F (10°C) to 85°F (29°C) or set to Continuous Heat.

PORTABLE HEATER CARE

Cleaning

NOTE: It is recommended that the portable heater be cleaned at least once a month and before seasonal storage.

1. Turn off the portable heater and unplug from outlet.
2. Allow the portable heater to cool before cleaning.
3. When the portable heater is cool, use a soft, dry cloth to clean the external surface.

Storing

NOTE: It is recommended that the portable heater be cleaned before seasonal storage.

1. Clean the external surface of the portable heater. See "Cleaning."
2. Pack the portable heater in the original container, if possible, and store in a cool, dry place.

NOTE: Do not disassemble the portable heater.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

WARNING

Fire Hazard

Do not use an extension cord.

In order to avoid overheating, do not cover the heater.

Heater must not be located immediately below a socketoutlet.

Doing so can result in death, or fire.

If the portable heater turns off

Check the following:

■ Is the current room temperature the same or higher than the temperature setting?
■ Is the portable heater plugged into a working outlet?
- Press POWER on the control panel or the ON button on the remote control. See "Portable Heater Use."
■ Any other servicing should be performed by an authorized service representative.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

When calling, please know the purchase date and the complete model and serial number of your appliance. This information will

事前規格PRODUC T SPEC.