WSF67251S - Dishwasher WESTINGHOUSE - Free user manual and instructions
Find the device manual for free WSF67251S WESTINGHOUSE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Model | WSF67251S |
| Brand | Westinghouse |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Weight | 45 kg |
| Energy Efficiency Class | A++ |
| Number of Place Settings | 14 |
| Noise Level | 44 dB(A) |
| Water Consumption per Cycle | 9.5 L |
| Energy Consumption per Cycle | 0.92 kWh |
| Annual Energy Consumption | 262 kWh |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick 30 min, Glass, Pre-wash |
| Drying System | Condensation drying |
| Delay Start | Yes, up to 24 hours |
| Water Connection | Cold water only |
| Power Supply | 220-240 V, 50 Hz |
| Current | 10 A |
| Integrated Water Softener | Yes, adjustable |
| Rinse Aid Dispenser | Yes |
| Salt Container Capacity | 1.2 kg |
| Cutlery Basket | Yes, removable |
| Child Lock | Yes |
| Warranty | 2 years |
Frequently Asked Questions - WSF67251S WESTINGHOUSE
How do I install the Westinghouse WSF67251S dishwasher?
Ensure the water supply and drain are within 1 meter of the unit. Level the dishwasher using the adjustable feet. Connect the inlet hose to a cold water supply and the drain hose to a suitable drain. Plug into a grounded outlet. Refer to the manual for detailed steps.
What does the ECO program do?
The ECO program is designed to save energy and water by running at a lower temperature (50°C) and longer duration. It is ideal for normally soiled dishes and is the most efficient cycle in terms of energy consumption.
How can I clean the filters?
Remove the lower rack and twist the coarse filter counterclockwise to lift it out. Rinse both the coarse and fine filters under running water. Use a soft brush if needed. Reassemble and ensure they are locked in place.
Why is the dishwasher not starting?
Check if the door is fully closed and latched. Ensure the unit is plugged in and the circuit breaker is on. Verify the water supply is open and the delay start function is not enabled. If the issue persists, contact support.
Can I use tablet detergent?
Yes, you can use all-in-one tablets. Place the tablet in the detergent dispenser and close the lid. For best results, use the appropriate program and ensure the rinse aid dispenser is filled.
How do I adjust the water softener setting?
Refer to the hardness of your water supply. Locate the water softener setting dial near the filter area. Rotate to the appropriate level as per the manual's water hardness table.
What is the maximum cutlery capacity?
The cutlery basket can hold up to 14 settings. Arrange knives, forks, and spoons with handles down. Ensure sharp knives are placed horizontally in the upper rack if available.
How do I enable the child lock?
Press and hold the Child Lock button for 3 seconds until the indicator lights up. To disable, repeat the same process. This prevents accidental program changes during operation.
Why is there water left at the bottom after a cycle?
This may be due to a blocked drain hose or filter. Check the drain hose for kinks and clean the filters. Also ensure the sink drain is not clogged. If the problem continues, it may require service.
How do I perform a factory reset?
Turn off the dishwasher and wait 10 seconds. Press and hold the Power button and the Program button simultaneously for 5 seconds. Release and turn on normally. All settings will revert to default.
User questions about WSF67251S WESTINGHOUSE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual WSF67251S - WESTINGHOUSE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WSF67251S by WESTINGHOUSE.