WSF6604WB - Dishwasher WESTINGHOUSE - Free user manual and instructions

Product Type	Dishwasher
Brand	Westinghouse
Model	WSF6604WB
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	48 kg
Power Supply	220-240 V, 50 Hz, 10 A
Energy Efficiency Class	A+
Water Consumption per Cycle	12 L
Annual Energy Consumption	290 kWh/annum
Number of Place Settings	12
Noise Level	47 dB(A)
Wash Programs	Eco, Intensive, Normal, Quick, Glass, Pre-Wash
Drying System	Condensation drying with heat exchanger
Delay Start	Up to 24 hours
Child Lock	Yes
AquaStop	Yes, anti-flood protection
Salt and Rinse Aid Indicators	Yes
Self-Cleaning Filter	Yes, automatic cleaning cycle
Number of Spray Arms	3
Adjustable Upper Basket	Yes, height adjustable
Cutlery Basket	Yes, removable
Interior Light	Yes, LED
Maintenance Reminder	Yes, for filter cleaning
Spare Parts Availability	Up to 10 years after purchase

Frequently Asked Questions - WSF6604WB WESTINGHOUSE

How do I install the Westinghouse WSF6604WB dishwasher?

Ensure the appliance is level and connected to a suitable water supply and drain. Refer to the installation manual for detailed steps. Important: use a dedicated grounded outlet.

What are the available wash programs and their uses?

Programs include Eco for energy-saving, Intensive for heavily soiled pots, Normal for daily loads, Quick for lightly soiled dishes, Glass for delicate items, and Pre-Wash for rinsing.

How can I troubleshoot if the dishwasher does not start?

Check power supply, door is closed securely, water supply valve is open, and no error codes on display. Reset by unplugging for 1 minute. If issue persists, consult customer service.

Why is the dishwasher not cleaning dishes properly?

Possible causes: blocked spray arms, dirty filters, low rinse aid, or wrong program selection. Clean filters and spray arms regularly. Use appropriate detergent and rinse aid.

How do I clean and maintain the dishwasher?

Clean filters under running water monthly. Wipe door seals and run a maintenance cycle with dishwasher cleaner. Check spray arms for clogs. Refer to manual for detailed instructions.

What does the error code E15 mean?

E15 indicates a water leakage detection. Turn off water supply, unplug the appliance, and check for leaks. Dry any water in the base tray. If error persists, contact service.

Can I use tablets or powder detergent?

Yes, both are suitable. Use tablets for convenience (place in detergent dispenser). For hard water, add salt and rinse aid. Follow dosing instructions on package.

How do I activate the child lock?

Press and hold the Child Lock button for 3 seconds until indicator lights up. To deactivate, press and hold again. This prevents accidental program changes.

What should I do if the dishwasher is noisy?

Check if dishes are correctly loaded and not interfering with spray arms. Ensure the appliance is level. Grinding noise may indicate foreign objects in pump. Inspect filters and impeller.

Where can I find spare parts for the WSF6604WB?

Spare parts are available from authorized Westinghouse dealers or online parts stores. Use model number WSF6604WB to ensure compatibility. Parts like filters, spray arms, and detergent dispensers are often replaceable.

USER MANUAL WSF6604WB WESTINGHOUSE

Black circular icon with a white crown symbol (no text or numbers)

User Manual

WSF6604WB

Front view of a white stainless steel kitchen appliance with control panel and digital display (no visible text or symbols)

CONTENTSCONGRATULATIONS

Congratulations and thank you for choosing our product. We are sure you will find your new appliance a pleasure to use and a great asset to your cooking. Before you use the appliance, we recommend you read through the whole user manual which provides a description of the product and its functions.

To make the best use of your new appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. This appliance complies with the requirements of Australian Standard AS/NZ 60335.2.5.

Conditions of use

This appliance is intended to be used in household and similar applications such as:

• Staff kitchen areas in shops, offices and other working environments
• Farm houses
• By clients in hotels, motels and other residential type environments
• Bed and breakfast type environments.

Record model and serial number here:

Model:

Serial number: ....

TIPS AND INFORMATION

Important: Check for any damage or marks.

If you find the dishwasher is damaged or marked, you must report it within 7 days if you wish to claim for damage/marks under the manufacturer's warranty. This does not affect your statutory rights.

IMPORTANT INFORMATION THAT MAY IMPACT YOUR MANUFACTURER'S WARRANTY

Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the Westinghouse manufacturer's warranty provided with your product. Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the Westinghouse manufacturer's warranty in the event that your product fault is due to failure to adhere this manual.

Important safety instructions....3

Recycling 3
Safety information 3
Recommendations 4
Items not suitable for dishwashing ....4

Description of your appliance 5

Technical specifications 5

The Control Panel 6

Changing a program 7
Cancelling a program 7

Installig The Machine 8

Positioning the machine....8

Water connection 8

Water inlet hose 8

Water drain hose 8

Water drain hose 9

Electrical Connection....9

Filling with rinse aid and setting 9

Preparing The Machine For Use ....11

Prior to using the machine for the first time .....11

Detergent usage....11

Filling the detergent compartment....11

Combined detergent 11

When you STOP using combined detergents ..... 12

Filling with rinse aid and setting....12

Loading your dishwasher 13

Upper Basket 14
Alternative modular basket position....15

Program descriptions....16

Program items 16

Maintenance and Cleaning 17

Filters 17
Spray arms 17
Drain Pump 17

Failure codes and what to do in case of failure .....18

Troubleshooting....19

Warranty....20

ENVIRONMENTAL TIPS

Information on disposal for users

• Most of the packaging materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.
• If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

IMPORTANT SAFETY INSTRUCTIONS

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Please read the user manual carefully and store in a handy place for later reference. Pass the user manual on to possible new owners of the appliance.

If you need assistance, contact your Customer Care Department. The manufacturer will not accept liability, should these instructions or any other safety instructions incorporated in this book be ignored.

WARNING

This symbol indicates information concerning your personal safety.

TIPS AND INFORMATION

This symbol indicates tips and information about use of the appliance.

ENVIRONMENTAL TIPS

This symbol indicates tips and information about economical and ecological use of the appliance.

Recycling

• Certain components and the packaging of your machine have been produced from recyclable materials.
• Plastic parts are marked with international abbreviations: (>PE<, >PS<, >POM<, >PP<, ....)
• Cardboard parts have been produced from recycled paper and they should be disposed of into waste paper collection containers for recycling.
• These materials should not be disposed of into garbage bins. They should be delivered to recycling centres instead.
• Contact relevant centres in order to obtain information on methods and points of disposal.

Safety Information

When you take delivery of your machine

• Check for any damage to your machine or to its packaging. Never start a damaged machine, make sure to contact an authorised technician.
• Unwrap the packaging materials as indicated and dispose of them in accordance with the rules.

The points to pay attention during machine installation

• Choose a suitable, safe and level location to install your machine.
• Carry out the installation and connection of your machine by following the instructions.
• This machine should be installed and repaired by an authorised technician only.
• Only original spare parts should be used with the machine.

• Before commencing the dishwasher installation, be sure that the machine is unplugged.

• Check whether the indoor electrical fuse system is connected according to the regulations.

• Make sure that the electrical information on the rating plate is the same as the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our
  • Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
• Pay special attention and make sure that the machine does not crush the power cord.
• Never use an extension cord or a multiple socket to make a connection. The plug should be easily accessible after the machine has been installed.
• After installing the machine, run it unloaded for the first time.

In daily use

• Do not use water spray and steam to clean the appliance.
• Do not stand, sit or place a load on the open door of the dishwasher, it may fall over.
• Only use detergents and rinse aids which are produced specifically for dishwashers. Otherwise Electrolux does not take any responsibility for damage that might occur to your machine.

WARNING

The water in the machine's washing section is not drinking water, do not drink it.

Due to danger of explosion, do not put into the machine's washing section any chemical agents such as solvents.

• Check whether plastic items are heat-resistant before washing them in the machine.
• Do not put into your machine those items which are not suitable for dishwashing. Also, do not overload basket.
• The machine door should not be opened while the machine is in operation, to avoid the risk of hot water spraying out. A safety device ensures that the machine stops if the door is opened.

SAFETY INFORMATION AND RECOMMENDATIONS

WARNING

Do not leave your dishwasher's door open, this may lead to accidents and injury.

RISK OF INJURY OR

PERMANENT DISABILITY

Place knives and other sharp ended objects in the cutlery basket in the point down position.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

For your children's safety

• After removing the machine's packaging, make sure that the packaging material is out of reach of children.
• Do not allow children to play with or start the machine.
• Keep your children away from detergents and rinse aids.
• Keep children away from the machine while it is open because there may still be residues of cleaning substances inside the machine.
• Be sure that your old machine does not pose any threat to children. Remove the dishwasher door lock and power supply cord.

In case of malfunctioning

• Any malfunction in the machine should be repaired by qualified persons. Any repair work performed by anyone other than the authorised service personnel will cause your machine to be left outside the scope of warranty.
• Prior to any repair work on the machine, be sure to unplug the dishwasher from the power supply. Do not pull by the cable when unplugging. Make sure to turn off the water tap.

Recommendations

• For energy and water saving, remove coarse residues on your dishes before placing the dishes into the machine. Start your machine after having fully loaded it.
• Use the pre-wash program only whenever necessary.
• Place items such as bowls, glasses and pots into the machine face down.

Items not suitable for dishwashing:

• Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-alloy materials;
• Forks, spoons and knives with wooden or bone, ivory or nacre-coated handles; glued items, items soiled with abrasive, acidic or

base chemicals;

• Plastic items that are not heat-resistant, copper or tin coated containers;
• Aluminium and silver objects (they may discolour, become dull);
• Certain delicate glass types, porcelains with ornamental printed patterns (may fade even after the first wash); certain crystal items (may lose their transparency over time), laminated cutlery that is not heat-resistant, lead crystal glasses, cutting boards, items manufactured with synthetic fibre;
• Absorbent items such as sponges or kitchen rags are not suitable for dishwashing.

WARNING

Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent compartment is empty after completion of wash cycle.

DESCRIPTION OF YOUR APPLIANCE

1 Worktop
2 Upper basket with racks
3 Upper spray arm
4 Lower spray arm
5 Filters
6 Lower basket

7 Rating plate
8 Control panel
8 Detergent and rinse-aid dispenser
10 Cutlery basket
11 Turbo Drying unit
12 Ceiling spray rose

TECHNICAL SPECIFICATIONS

Capacity 14 place settings

Height 850 mm

Height (without worktop) 820* mm

Width....598 mm

Depth 598 mm

Net weight 45.5 kg

Electricity input 220-240 V, 50 Hz

Total power 1900 W

Heating power....1800 W

Pump power....100W

Drain pump power 30 W

Water supply pressure.... 0.03 MPa (0,3 bar) - 1 MPa (10 bar)

Water supply temperature 5 - 60°C

Current 10 A

• Electrolux reserves the right to amend design and technical specifications.
• Do not use this appliance with power and temperature specifications different to those indicated.
• Do not change the specification of this appliance. with counterweight and insulation removed

THE CONTROL PANEL

1. On/Off Button

It turns on/off the energy of the machine when it is pushed, The On-Off lamp lights as long as the machine is on.

2. Program Selection Buttons

It is used for program selection with up/down buttons.

3. Tablet Option Button

It is used for selection for tablet option. If tablet option is activated, tablet lamp turns on. Select the Tablet Detergent option when using a combined detergent that contains rinse aid or other extras. The Tablet Detergent Indicator will remain on for as long as it is selected.

4. Delay Button

It is used for activation of delay timer. When it is pushed once, 3h timer is activated. 6h and 9h delay timer is activated during consecutive pushes, respectively. If both delay leds are active, it means that 9h delay timer is active.

5. Child Lock Feature Led

This feature is activated by pressing both tablet and delay timer buttons at the same time during 3 seconds. If any button is pushed when the child lock feature is active, all leds blink.

6. Start/Pause Key

When you press the Start/Pause key, the program you have selected with the program selection button will start operating and the washing light will be on. After the program has started, the Start/Pause light will go off. In the Stop (Hold) position, the Start/Pause light blinks while the washing light is lit.

7. Program Monitoring Lights

You can monitor the program flow with the program lights on the control panel.

8. Rinse Aid Indicator

Check the rinse aid missing warning indicator light on the display to have an idea whether the amount of the rinse aid in your machine is enough. When the rinse aid missing warning indicator is lit, fill the rinse aid compartment.

9. Half Load Button

Thanks to the half load function in your machine, you can shorten the durations of the programs that you have selected and reduce the energy and water consumption by using half load electricity and water.

Switch the machine on by pressing the On/Off button. The On/Off lamp remains lit as long as the machine is on.

Press the Start/Pause button to start the selected program. The Start/Pause light will switch off and the Wash light will illuminate. If the door of your machine is opened while a program is in operation, the Start/Pause light will flash.

NOTE: Press the half load button to activate the Half Load function, which shortens the duration of a program. Press the button again to cancel it.

NOTE: If an extra feature is used, such as the Delay, Tablet or Half Load, on the most recent wash program, this feature will remain active on the next selected program. To cancel this feature on the newly selected wash program, turn the machine off and on. Extra features can be activated with the newly selected program.

Delaying the Program

Press the Delay button to delay the start time of a program for 3, 6 or 9 hours. Pressing the button once will delay the start time for 3 hours, pressing twice will delay for 6 hours, and pressing a third time will delay the start time for 9 hours. If the button is pressed for a fourth time, there will be no delay. Press the Start/Pause button to activate the delay. The program can be selected first and the delay time after, or vice versa. To cancel or change the delay time, press the Start/Pause button first, then select a new delay time. The delay time can be cancelled by turning off the machine. During a delay, the light corresponding to the remaining time is switched on.

THE CONTROL PANEL

Changing a Program

Follow the steps below to change a program while in operation.

Cancelling a Program

Follow the steps below to cancel a program while in operation.

Saving a Favourite Program

You can add the programs and options that you consider are best for your dishes and you frequently use. To set your favourite program;

1. Select the program that you want to select using the program button.

2. Add the suitable options for the wash using the option buttons if you want to add additional options to this program.

3. When you press "up" and "down" buttons together after completing your program and option selection, your favourite program and option will be saved.

Selecting a Favourite Program

Press to "Up" button for 3 seconds to select your favourite program.

Switching the Machine Off

NOTE: Do not open the door before the program is complete.

NOTE: Leave the door slightly open at the end of a wash program to speed up the drying process.

NOTE: If the door of the machine is opened or the power is cut off during a wash program, the program will continue when the door is closed or when the power returns.

NOTE: If the power is interrupted or if the machine door is opened during the drying process, the program will terminate and your machine will now be ready for a new program selection.

INSTALLING THE MACHINE

Positioning the machine

• When considering the location for the dishwasher, ensure that there is adequate space to enable loading and unloading of the dishes
• Do not put your machine in any location where the ambient temperature can fall below 5°C.
• Before positioning, take the machine out of its packaging by following the warnings located on the package.
• Position the machine close to a water tap and drain. You need to position your machine, taking into consideration that its connections will not be altered once they are made.
• Do not grip the machine by its door or panel in order to move it.
• Take care to leave a certain clearance from all sides of the machine so that you can comfortably move it back and forth during cleaning.
• Make sure that the water inlet and outlet hoses do not get squeezed while positioning the machine. Also, make sure that the machine does not stand on the electrical cable. Adjust the machine's feet so that it is level and stable. Proper positioning of the machine ensures problem-free opening and closing of its door.
• If the door of your machine does not close properly, check if the machine is stable on the floor; if not, adjust the feet and ensure it is level and stable.

Water connection

Ensure that the indoor plumbing is suitable for installing a dishwasher and complies with AS/NZS 3500.1.

Also, we recommend that you fit a filter at the entrance of your place or apartment so as to avoid any damage to your machine because of any contamination (sand, clay, rust etc) that might be occasionally carried in through the main's water supply or the indoor plumbing, and to avoid problems of staining and formation of deposits after washing.

Water inlet hose

Do not use the water inlet hose of your old machine, you must use the new water inlet hose supplied with your machine. Before connecting the water inlet hose to the water tap, ensure clean water is flowing from the tap before making the connection. Connect the water inlet

Simple line drawing of a faucet with a handle and valve (no text or symbols)

hose directly to the water inlet tap. The pressure supplied by the tap should be at a minimum of 0.03 MPa and at a maximum of 1 MPa. If the water pressure is above 1 MPa, a pressure-relief valve should be installed.

Only turn the locking nut to secure hose - do not turn the hose.

• The first time you use the appliance, make sure that there is no leakage.
• The water inlet hose has a safety valve and a sheath with an inner mains cable.

After the connections are made, the tap should be turned on fully and checked for water tightness. For the safety of your machine, make sure to always turn off the water inlet tap after each wash program is finished.

WARNING

NOTE: Aquastop inlet hose has components using 240V. Do not cut Aquastop inlet hose. Do not let it get folded, twisted, kinked or crushed.

WARNING

NOTE: A water tempering valve is required if the water temperature is over 60°C.

CAUTION

Always use new hoses when you connect the appliance to the water mains. Old hoses must

not be used. The water inlet hose must be examined at an interval of twelve months for deterioration and replaced if necessary.

In order to pass the safety valve through the kitchen cabinets, an opening of at least 45mm x 90mm is needed.

Water drain hose

If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane. If you do not remove the entire membrane, remaining food can cause a blockage in the drain hose spigot. Ensure a hose clamp is used to secure the hose to the spigot.

INSTALLING THE MACHINE

Water drain hose

of the dishwasher.

The water drain hose can be connected either directly to the water drain hole or to the sink outlet spigot. Using a hose hook (if available), the water can be drained directly into the sink by positioning the hose hook over the edge of the sink.

This connection should be at a minimum of 50 cm and at a maximum of 110 cm above the base

WARNING

Maximum drain hose length

is 4m. Longer hose length will prevent correct draining, and result in poor wash performance.

√
(correct)

Simple line drawing of a device with a curved cable or wire, no text or symbols present.

×
(incorrect)

WARNING

Electrical Connection

The plug of your machine should be connected to an earthed outlet that supplies suitable voltage and current. If there is no earthing installation, have a competent electrician carry out an earthing installation. In case of usage without earthing installed, our company will not be responsible for any loss of usage that might occur.

The indoor fuse current value should be 10-16 A.

Your machine is designed for 220-240 V. The machine should not be plugged in during installation.

Always use the molded plug supplied with your machine.

Running in low voltage will cause a decline in washing quality.

The machine's electrical cable should be replaced by an authorised service or an authorised electrician only. Failure to do so may lead to accidents.

For safety purposes, always make sure to disconnect the plug when a wash program is finished.

In order not to cause an electric shock, do not unplug when your hands are wet.

When disconnecting your machine from the mains supply, always pull from the plug. Never pull the cord itself.

Fitting the machine undercounter

If you wish to fit your machine undercounter, check whether you have sufficient space under your countertop and whether the wiring-plumbing is suitable to do so.

To ensure the stability of the dishwasher for an underbench installation, if the underbench dimension is greater than 820mm, any gap between the dishwasher and the underside of the benchtop should be bridged with a packing piece. This may be achieved by wedging a piece of timber between the dishwasher and the benchtop as shown.

INSTALLING THE MACHINE

1 Adjust the machine feet according to the slope of the floor.
2 Fit your machine by pushing it undercounter without letting the hoses get crushed or bent.

WARNING

Ensure the opening for the dishwasher is according to the following dimensions.

PREPARING THE MACHINE FOR USE

Prior to using the machine for the first time

• Check whether the electricity and water supply specifications match the values indicated by the installation instructions for the machine.
• Remove all packaging materials inside the machine.
• Fill the rinse aid compartment.

Detergent usage

Use a detergent specifically designed for use in domestic dishwashers. You can find powder, gel, and tablet detergents in the market that have been designed for household dishwashers. Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry places out of reach of your children. Do not fill detergent into the detergent compartment more than required; otherwise it may etch your glasses as well as leaving undissolved detergent in the dishwasher. Should you need more information concerning the detergent to use, contact detergent manufacturers directly.

Filling the detergent compartment

Push the latch to open the detergent container as shown in the image.

Line drawing of a camera with an arrow pointing to the top panel (no text or symbols)

The Detergent pod has level lines inside. It is possible to measure the right detergent amount using these lines.

The detergent pod can take a maximum of 40cm^3 detergent.

Open the dishwasher detergent pod and pour 25cm ^3 if your dishes are heavily soiled or 15cm ^3 if they are less soiled.

You may have to add more detergent into your machine, depending on the degree of soil and the water hardness in your area.

If your dishes are from the previous day and there is dried food waste on them, or if you have fully loaded the dishwasher, pour 5cm ^3 detergent onto the base of the door and start your machine.

Combined detergent

Detergent manufacturers also produce combined detergents called "2 in 1", "3 in 1" or "5 in 1" etc.

"2 in 1" detergents contain detergent or rinse aid. When using "2 in 1" detergent make sure to check the specifications of the tablet.

Other tablet detergents contain detergent + rinse aid + various extra functions/additives.

Generally, combined detergents produce acceptable results under certain usage conditions only. These detergents contain rinse aid in preset amounts.

Points to consider when using these type of products:

• Always make sure to check the specifications of the product you will use or whether or not it is a combined product.
• Check if the detergent used is appropriate for the hardness of mains water that machine relates to.
• Observe the instructions on packaging when using such products.
• If such detergents are in the form of tablets, never put them into the interior section or the cutlery basket of the dishwasher. Always put the tablets into the detergent compartment in the detergent dispenser.
• They produce good results for certain types of usage only. If you are using this type of detergent, you need to contact the manufacturers and find out about the suitable conditions of use.
• When the conditions of use of such products and the machine settings are appropriate, they ensure savings in rinse aid consumption.
• Contact the detergent manufacturer if you are not obtaining good wash results (if your dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of warranty for your machine does not cover any complaints caused by the use of these types of detergents.

Recommended usage: If you want to obtain better results while using combined detergents, add rinse aid into your machine and adjust the rinse aid setting to the lowest position.

Solubility of the tablet detergents produced by different companies can vary depending on the temperature and time. Therefore, it is not recommended to use these detergents in short programs. It is more suitable to use powder detergents and rinse aid in short programs.

WARNING

Should any problem occur which you have not encountered before, with the use of these types of detergents, contact the detergent manufacturers directly.

PREPARING THE MACHINE FOR USE

When you STOP using combined detergents

• Fill the rinse aid compartments.
• Select a suitable rinse aid setting.

Filling with rinse aid and setting

To fill the rinse aid compartment, open the rinse-aid compartment cap.

Line drawing of a device with buttons and decorative patterns (no text or symbols)

Line drawing of a device with an arrow indicating rotation or change, no text or symbols present

Fill the compartment with rinse aid until MAX level and then close the cap.

Be careful not to overfill the rinse aid compartment and wipe up any spills.

In order to set rinse aid level, follow below steps:

• Turn on the machine by pressing the On/Off button.
• Press the Up button for at least 3 seconds immediately after the machine is turned on.
• Release the Up button when all leds blinks once. The last setting level is displayed.
• Press Up or Down button to increase or decrease the hardness level.
• Turn off the machine to save the setting.

The factory setting is "4".

If the dishes are not drying properly or are spotted, increase the rinse-aid level. If blue stains form on your dishes, decrease the rinse-aid level.

Level Brightener Dose Indicator
1 Rinse-aid not dispensed		Wash LED is on.
2 1 dose is dispensed Dry LED is on.
3 2 doses are dispensed End LED is on.
4 3 doses are dispensed Wash and Dry LEDs are on.
5 4 doses are dispensed Wash and End LEDs are on.

TIPS AND INFORMATION

Only use rinse aid suitable for automatic dishwashers.

As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and reduce the washing performance, remove the excess amount of rinse aid by wiping it with a cloth. Remove all excess rinse aid if spilt while filling.

LOADING YOUR DISHWASHER

For best results, follow these loading guidelines.

Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings.

Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended You can place cups, glasses, stemware, small plates, bowls, etc. in upper basket. Do not lean long glasses against one another or they cannot remain steady and may receive damage.

When placing long stem glasses and goblets, lean them against the basket edge or rack and not against other items.

Place all containers such as cups, glasses and pots into the dishwasher with the opening facing downwards otherwise water can collect on items.

If there is cutlery basket in machine, you are recommended to use the cutlery grid in order to obtain the best result. Place all large (pots, pans, lids, plates, bowls etc.) and very dirty items in the lower rack.

Dishes and cutlery should not be placed above each other.

WARNING: Take care not to obstruct the rotation of spray arms.

WARNING: Make sure after loading the dishes do not prevent ing the detergent dispenser.

Recommendations

Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with full load.

Do not overload the drawers or place dishes in the wrong set.

TIPS AND INFORMATION

Ensure the position of the dishware does not prevent the upper or lower spray arm from turning.

Upper Basket

Height adjustment

Turn the Rail Stop Clips, at the ends of the rails, to the sides to open them (as shown in the image below), then pull out and remove the basket. Change the position of the wheels, then reinstall the basket to the rail, making sure to close the Rail Stop Clips. When the upper basket is in the higher position, large items such as pans can be placed on the lower basket.

Illustration of a hand holding a metal bracket with internal wiring (no text or symbols)

Mechanical assembly diagram showing a conveyor belt system with two wheels and directional arrows indicating motion (no text or symbols)

Top basket

Fixed Rack

Upper basket racks have two positions: open (a) and closed (b). You can place cups on the racks to be washed. You can also place long forks, knives and spoons on the racks laterally.

Upper Basket Knife Holder (varies by model)

Thanks to the knife holder in the upper baskets, it is possible to store kitchen utensils such as bread knives and ladles. You can wash it easily.

3D wireframe model of a mechanical or architectural structure with layered grid patterns (no text or symbols)

When you do not want to use it, you can remove the upper basket knife shelf by pulling it upwards.

3D rendering of a mechanical component with grid-like structure and upward arrow indicator (no text or symbols)

Slide Basket

The movable cutlery basket can slide between the front and rear wires of the bottom basket.

Architectural wireframe diagram of a building interior (no text or symbols)

Line drawing of a multi-tiered basket structure with mesh patterns (no text or symbols)

LOADING YOUR DISHWASHER

Alternative modular basket position

3D cutaway diagram of an industrial facility showing internal structures and components (no text or labels)

Alternative basket loads Lower Basket

Cross-sectional diagram of a washing machine showing internal components (no text or labels)

Illustration of a basket containing four cooking pots (no text or symbols)

LOADING YOUR DISHWASHER

Top Basket

Electrical equipment grid with insulators and coils (no visible text or symbols)

TIPS AND INFORMATION

Examples of incorrect loading

Diagram showing a cross symbol crossed over a grid of circular objects, no text or labels present

Abstract 3D graphic with intersecting geometric shapes and a grid background (no text or symbols)

3D rendered mechanical component with a central cross mark, no visible text or symbols

Industrial machinery diagram with no visible text, numbers, or symbols

PROGRAM DESCRIPTIONS

Program items

NAME OF PROGRAM	PREWASH	FAST 30'	ECO*	TIMESAVE 50'	SENSORWASH	HYGIENE
TYPE OF FOOD SOILS	Rinse items that you plan to wash later.	Lightly soiled items and a quick wash, no drying.	Standard program for normally soiled daily using dishes with reduced energy and water consumptions.	Lightly to normally soiled items, faster program but reduced drying.	Auto program for normally and heavily soiled dishes.	Suitable for heavily soiled dishes requiring hygienic washing.
PROGRAM TIME (MINS)	15 30 220	50 185 - 204 127

NOTE: PROGRAM DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF DISHES, TAP WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.

• Only use powder detergent in short programs.
- Short programs do not include a drying step.

• To assist drying, we recommend partially opening the door after the program has finished.

Information for test laboratories

For all the necessary information for performance testing, send an email to [e-mail] In your mail please provide the model number and PNC number that is on the rating plate on the appliance door.

MAINTENANCE AND CLEANING

Cleaning your dishwasher is important to maintain the machine's service life

Oil and limescale may build up in your Dishwasher over time. If this occurs:

Fill the detergent compartment

but do not load any dishes. Select a program which runs at high temperature and run the Dishwasher empty. If this does not clean your Dishwasher sufficiently, use a cleaning agent designed for use with dishwashers.

To extend the life of your dishwasher, clean the appliance regularly on each month.

Wipe the door seals regularly with a damp cloth to remove any accumulated residue or foreign objects.

Filters

Clean the filters and spray arms at least once a week. If any food waste remains or foreign objects on the coarse and fine filters, remove them and clean them thoroughly with water.

a) Micro Filter b) Coarse Filter

c) Metal Filter

Diagram of a mechanical assembly with a central component and a coiled spring (no text or symbols)

Diagram of a mechanical assembly with a central component and a circular base (no text or symbols)

To remove and clean the filter combination, turn it counter clockwise and remove it by lifting it upwards (1). Pull the coarse filter out of the micro filter (2). Then pull and remove the metal filter (3). Rinse the filter with lots of water until it is free of residue. Reassemble the filters. Replace the filter insert, and rotate it clockwise (4).

• Never use your dishwasher without a filter.
• Incorrect fitting of the filter will reduce the washing effectiveness.
• Clean filters are necessary for proper running of the machine.

Spray arms

Make sure that the spray holes are not clogged and that no food waste or foreign object is stuck to the spray arms. If there is any clogging, remove the spray arms and clean them under water. To remove the upper spray arm undo the nut holding it in position by turning it clockwise and pulling it downwards. Make sure that the nut is properly tightened when refitting the upper spray arm.

Technical line drawing of a mechanical assembly with gears and shafts (no text or symbols)

Drain Pump

Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter.

Warning Risk of cuts!

When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.

In this case:

1. irst always disconnect the appliance from the power supply.
2. Take out baskets.
3. Remove the filters.
4. Scoop out water, use a sponge if required.
5. Check the area and remove any foreign objects.
6. Install filters.
7. Re-insert baskets.

FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE

TROUBLE CODE				POSSIBLE FAULT WHAT TO DO
Start/Pause	Wash	Dry End
				Make sure the water inlet tap is open and water is flowing.
				Separate the inlet hose from the tap and clean the filter of the hose.
				Contact for service if the error continues.
				Pressure system failure
				Contact for service.
				Close the tap and contact for service.
				Water discharge hose and filters may be clogged.
				Cancel the program.
				If the error continues, contact for service.
				Unplug the machine and close the tap.
				Contact for service.
				Faulty heater sensor Contact for service.
				Overheating Contact for service.
				Unsuccessful heating Contact for service.
				High voltage Contact for service.
				Low voltage Contact for service.

The installation and repairing procedures should always carried out by the Authorised Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons. Repairs may be carried out by technicians only. If a component has to be replaced, ensure that only original spare parts are used.

Improper repairs or use of non-original spare parts may cause considerable damage and put the user at considerable risk.

Contact information for your customer service can be found on the back of this document.

Function-relevant genuine spare parts according to the corresponding Ecodesign order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.

TROUBLESHOOTING

PROBLEM SOLUTION
If one of program monitor lights is on and start/pause light is flashing	·Your machine's door is open, shut the door.
If the program won't start	·Check if the plug is connected.·Check your indoor fuses.·Be sure that the water inlet tap is turned on.·Be sure that you have closed the machine door.·Be sure that you switched off the machine by pressing the Power On/Off button.·Be sure that the water inlet filter and the machine filters are not clogged.·First time use: Check if the drain spigot's membrane has been removed or spigot blocked.·Check if the delay start has been selected - reset.
If detergent residues are left in the detergent compartment	·Detergent has been added when the detergent compartment was wet.·A large dish in the lower basket has blocked the dispenser door.
If water is left inside the machine at the end of the program	·The water drain hose is clogged or twisted.·The filters are clogged.·The program is not finished yet.
If the machine stops during a wash operation	·Power failure.·Water inlet failure.·Program can be on standby mode.
If shaking and hitting noises are heard during a wash operation	·Dishes placed incorrectly.·Spray arm hitting the dishes.
If there are partial food wastes left on the dishes	·Dishes placed incorrectly into the machine, sprayed water did not reach related places.·Basket over loaded.·Dishes leaning against one another.·Very small amount of detergent added.·An unsuitable, rather weak wash program selected.·Spray arm clogged with food wastes.·Filters clogged.·Filters incorrectly fitted.·Water drain pump clogged.
If there are whitish stains on the dishes	·A very small amount of detergent is being used.·Rinse aid dosage setting at a very low level.
If the dishes won't dry up	·A program without a dry operation selected.·Rinse aid dosage set too low.·Dishes unloaded too fast.
If there are rust stains on the dishes	·Stainless-steel quality of the dishes washed is insufficient.·Unhealthy mains grounding.

Call an authorised service centre if the problem still persists after the controls or in case of any malfunction not described above.

This document sets out the terms and conditions of the product warranties for Westinghouse Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law.

1. In this warranty:

(a) ‘ACL’ or ‘Australian Consumer Law’ means Schedule 2 to the Competition and Consumer Act 2010;
(b) 'Appliance' means any Electrolux product purchased by you and accompanied by this document;
(c) 'ASC' means Electrolux's authorised serviced centres;
(d) 'Westinghouse' is the brand controlled by Electrolux Home Products Pty Ltd of 163 O'Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited (collectively "Electrolux") of 3-5 Niall Burgess Road, Mount Wellington, in respect of Appliances purchased in New Zealand;
(e) 'Warranty Period' means the period specified in clause 3 of this warranty;
(f) 'you' means the purchaser of the Appliance not having purchased the Appliance for re-sale, and 'your' has a corresponding meaning.

1. Application: This warranty only applies to new Appliances, purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict, or modify in any way) other rights and remedies under a law to which the Appliances or services relate, including any non-excludable statutory guarantees in Australia and New Zealand.

3.WarrantyPeriod: Subject to these terms and conditions, this warranty continues for in Australia for a period of 24 months and in New Zealand for a period of 24 months, following the date of original purchase of the Appliance.

1. Repair or replace warranty: During the Warranty Period, Electrolux or its ASC will, at no extra charge if your Appliance is readily accessible for service, without special equipment and subject to these terms and conditions, repair or replace any parts which it considers to be defective. Electrolux may, in its absolute discretion, choose whether the remedy offered for a valid warranty claim is repair or replacement. Electrolux or its ASC may use refurbished parts to repair your Appliance. You agree that any replaced Appliances or parts become the property of Electrolux.

2. Travel and transportation costs: Subject to clause 7, Electrolux will bear the reasonable cost of transportation, travel and delivery of the Appliance to and from Electrolux or its ASC. Travel and transportation will be arranged by Electrolux as part of any valid warranty claim.

3. Proof of purchase is required before you can make a claim under this warranty.

4. Exclusions: You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. This warranty does not cover:

(a) light globes, batteries, filters or similar perishable parts;
(b) parts and Appliances not supplied by Electrolux;
(c) cosmetic damage which does not affect the operation of the Appliance;

(d) damage to the Appliance caused by:
(i) negligence or accident;
(ii) misuse or abuse, including failure to properly maintain or service;
(iii) improper, negligent or faulty servicing or repair works done by anyone other than an Electrolux authorised repairer or ASC;
(iv) normal wear and tear;
(v) power surges, electrical storm damage or incorrect power supply;
(vi) incomplete or improper installation;
(vii) incorrect, improper or inappropriate operation;
(viii) insect or vermin infestation;
(ix) failure to comply with any additional instructions supplied with the Appliance;

In addition, Electrolux is not liable under this warranty if:

(a) the Appliance has been, or Electrolux reasonably believes that the Appliance has been, used for purposes other than those for which the Appliance was intended, including where the Appliance has been used for any non-domestic purpose;
(b) the Appliance is modified without authority from Electrolux in writing;
(c) the Appliance's serial number or warranty seal has been removed or defaced

1. How to claim under this warranty: To enquire about claiming under this warranty, please follow these steps:

(a) carefully check the operating instructions, user manual and the terms of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.

1. Australia: For Appliances and services provided by Electrolux in Australia: Electrolux goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. 'Acceptable quality' and 'major failure' have the same meaning as referred to in the ACL.
2. New Zealand: For Appliances and services provided by Electrolux in New Zealand, the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair Trading Act. Where the Appliance was purchased in New Zealand for commercial purposes the Consumer Guarantee Act does not apply.
3. Confidentiality: You accept that if you make a warranty claim, Electrolux and its agents including ASC may exchange information in relation to you to enable Electrolux to meet its obligations under this warranty.

Important Notice
Before calling for service, please ensure that the steps listed in clause 8 above have been followed.

AUSTRALIA	FOR SERVICEor to find the address of your nearest authorised service centre in AustraliaPLEASE CALL 13 13 49For the cost of a local call	FOR SPARE PARTSor to find the address of your nearest spare parts centre in AustraliaPLEASE CALL 13 13 50For the cost of a local call
NEW ZEALAND	FOR SERVICEor to find the address of your nearest authorised service centre in New ZealandPLEASE CALL 0800 10 66 10	FOR SPARE PARTSor to find the address of your nearest spare parts centre in New ZealandPLEASE CALL 0800 10 66 20

For more information on all Westinghouse appliances, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website:

AUSTRALIA

service: 13 13 49

spare parts: 13 13 50

email: [e-mail]

web: westinghouse.com.au

NEW ZEALAND

Customer Care: 0800 436 245

Spare Parts: 0800 106 620

Emai: [e-mail]

Web: westinghouse.co.nz

Simple white crown icon inside a circle on gray background (no text or symbols)