AVS-HDB-RX - Extendeur AV Black Box - Free user manual and instructions
Find the device manual for free AVS-HDB-RX Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDMI Extender (Receiver) |
| Model | AVS-HDB-RX |
| Brand | Black Box |
| Category | AV Extender |
| Dimensions (W x D x H) | Approx. 100 x 80 x 25 mm |
| Weight | Approx. 200 g |
| Power Supply | 5V DC, 2A (included) |
| Video Resolution | Up to 1080p @ 60 Hz |
| Transmission Distance | Up to 100 m over Cat6 cable |
| Input Interface | 1x HDMI (Male or Female as per model) |
| Output Interface | 1x RJ45 (Female) |
| HDCP Support | Yes, HDCP 1.4 |
| Audio Support | Stereo audio via HDMI |
| LED Indicators | Power, Link, Signal |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 85% RH (non-condensing) |
| Material | Metal housing |
| Mounting | Desktop or wall-mountable (brackets included) |
| Compliance | CE, FCC |
| Warranty | 2 years |
Frequently Asked Questions - AVS-HDB-RX Black Box
How do I connect the AVS-HDB-RX?
Connect the HDMI source to the transmitter (AVS-HDB-TX) via HDMI cable. Connect the transmitter to the receiver using a Cat6 cable up to 100m. Then connect the receiver to the display via HDMI. Power both units.
What is the maximum distance supported?
The extender supports up to 100 meters when using a Cat6 cable. For longer distances, use a network switch or extender.
Does it support 4K resolution?
This model supports up to 1080p @ 60 Hz. For 4K support, please check the Black Box 4K extender models.
What type of cable should I use?
Use a Cat6 or better (Cat6a, Cat7) straight-through Ethernet cable with RJ45 connectors. Shielded cable is recommended for longer runs.
Why is there no video output?
Check that both transmitter and receiver are powered. Ensure HDMI cables are securely connected. Verify the Link LED on the receiver is lit. If not, check the Ethernet cable.
Can I use a switch or router between transmitter and receiver?
No, this extender requires a direct point-to-point connection. Using a network switch or router may cause signal loss or failure.
How do I reset the device?
Unplug the power adapter from the receiver for 10 seconds and plug it back in. If issues persist, perform a factory reset via the reset pinhole (if available).
Is the device plug-and-play?
Yes, the extender is plug-and-play. No drivers or software installation is required. However, ensure HDCP-compatible source and display.
What is the power consumption?
The receiver consumes approximately 5W (5V @ 1A). Use only the provided power adapter.
Can I daisy-chain multiple receivers?
No, this is a one-to-one extender. For multiple displays, use a splitter at the source or a matrix switch.
User questions about AVS-HDB-RX Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Extendeur AV in PDF format for free! Find your manual AVS-HDB-RX - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVS-HDB-RX by Black Box.