ISA550W-BUN3-K9 - Security management software CISCO - Free user manual and instructions
Find the device manual for free ISA550W-BUN3-K9 CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security management software appliance |
| Model | ISA550W-BUN3-K9 |
| Brand | Cisco |
| Dimensions (H x W x D) | 4.45 x 30.48 x 25.4 cm (1.75 x 12 x 10 in) |
| Weight | 4.5 kg (9.9 lbs) |
| Power Supply | AC 100-240V, 50-60Hz, 150W |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| Firewall Throughput | Up to 1 Gbps |
| VPN Throughput | Up to 300 Mbps |
| Supported VPN Protocols | IPsec, SSL, L2TP, PPTP |
| Number of VPN Tunnels | Up to 100 |
| WAN Ports | 2 x Gigabit Ethernet |
| LAN Ports | 4 x Gigabit Ethernet |
| USB Ports | 1 x USB 2.0 |
| Management Interface | Web-based GUI, CLI, SNMP |
| Logging and Monitoring | Syslog, SNMP traps, detailed logs |
| Security Features | Stateful firewall, IPS, antivirus, anti-spam, content filtering |
| Wireless Security | WPA2, WPA3, MAC filtering, guest network |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity (Operating) | 10% to 90% non-condensing |
| Cleaning Instructions | Disconnect power, wipe with dry cloth, no liquids |
| Safety Certifications | UL, CE, FCC Class A |
| Spare Parts Availability | Contact Cisco or authorized resellers |
| Repair Information | Refer to Cisco warranty or service contract |
| Included Accessories | Power cord, quick start guide, CD with documentation |
Frequently Asked Questions - ISA550W-BUN3-K9 CISCO
How do I perform a factory reset on the Cisco ISA550W?
Locate the Reset button on the back panel. Use a paperclip to press and hold it for about 10 seconds until the LEDs flash. The device will reboot with factory defaults.
What wireless standards does the ISA550W support?
It supports 802.11a/b/g/n/ac, offering dual-band operation up to 1.3 Gbps on 5 GHz and 450 Mbps on 2.4 GHz.
How can I configure VPN tunnels on this device?
Access the web GUI, go to VPN > IPSec or SSL settings. Define phase 1 and phase 2 parameters, remote peer IP, and authentication. Save and apply.
Can I use the ISA550W as a wireless access point only?
Yes, in the web GUI enable Access Point mode under Wireless settings. Disable DHCP and NAT, and connect via LAN to your router.
What is the default IP address and login credentials?
Default IP is 192.168.1.1. Username: admin, Password: cisco (in lower case). Change immediately after first login.
How do I update the firmware on the ISA550W?
Download the latest firmware from Cisco.com. In the web GUI, go to Administration > Firmware Upgrade, choose the file, and upload. Do not power off during update.
Does this device support VLANs?
Yes, it supports 802.1Q VLANs. Create VLANs under Interfaces > VLAN and assign them to LAN ports for segmentation.
How can I monitor network traffic on the ISA550W?
Use the Monitoring section in the web GUI to view logs, connections, bandwidth usage, and generate reports. Enable syslog for external monitoring.
What should I do if I forgot the admin password?
Perform a factory reset by holding the Reset button for 10 seconds. This erases all settings and restores default credentials.
Is it possible to set up a guest wireless network?
Yes, under Wireless > SSID, create a second SSID and enable Guest Network. Configure separate VLAN and restrict access to LAN.
User questions about ISA550W-BUN3-K9 CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security management software in PDF format for free! Find your manual ISA550W-BUN3-K9 - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ISA550W-BUN3-K9 by CISCO.