LDT323V - Monitor MITSUBISHI - Free user manual and instructions
Find the device manual for free LDT323V MITSUBISHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monitor |
| Brand | Mitsubishi |
| Model | LDT323V |
| Display Size | 32 inches (81 cm) |
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Panel Type | LCD with LED backlight |
| Brightness | 500 cd/m² |
| Contrast Ratio | 1200:1 |
| Response Time | 8 ms |
| Viewing Angle | 178° horizontal / 178° vertical |
| Input Connectors | HDMI, DVI-D, VGA, BNC, Composite, S-Video |
| Power Consumption | 150 W (typical), < 1 W standby |
| Weight | 15 kg (with stand) |
| Dimensions (W x H x D) | 780 x 480 x 100 mm (without stand) |
| VESA Mount | 200 x 200 mm |
| Built-in Speakers | 2 x 10 W |
| Control | Remote control, RS-232C |
| Image Modes | Standard, Cinema, Dynamic, Custom |
| Power Supply | AC 100-240V, 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Cleaning | Soft cloth with mild detergent; do not use abrasive cleaners |
| Safety | Do not block ventilation slots; use grounded outlet; avoid liquid contact |
| Spare Parts | Remote control, power cord, VGA cable available via authorized service |
| Repairability | Serviceable by qualified technicians; do not disassemble |
Frequently Asked Questions - LDT323V MITSUBISHI
How do I connect the monitor to my computer?
Use an HDMI, DVI-D, or VGA cable. Connect one end to the monitor and the other to your computer's video output. Then select the correct input source using the remote or menu button.
The monitor has no power. What should I check?
Ensure the power cord is securely connected to both the monitor and a working power outlet. Check if the power switch (if any) is on. If using a power strip, make sure it is turned on.
How do I clean the screen?
Turn off the monitor and unplug it. Use a soft, lint-free cloth slightly dampened with water or a mild screen cleaner. Gently wipe the screen in a circular motion. Do not spray liquid directly on the screen.
What is the recommended resolution for this monitor?
The native resolution is 1920 x 1080 (Full HD). For best image quality, set your computer's display output to this resolution.
Can I mount this monitor on a wall?
Yes, it supports VESA mount standard 200 x 200 mm. Use a compatible wall mount bracket and follow the instructions carefully. Ensure the wall can support the monitor's weight.
How do I adjust the picture settings?
Press the MENU button on the remote or on the monitor to access the On-Screen Display (OSD). Navigate to Picture settings to adjust brightness, contrast, color, and sharpness. You can also select preset modes.
Why is there no sound from the built-in speakers?
Check that the audio cable is connected from your source to the monitor's audio input (if required). Also verify that the volume is not muted and is turned up in the OSD menu. The speakers are 2 x 10W.
What should I do if the screen flickers?
Ensure the refresh rate is set correctly (60 Hz recommended). Check the video cable connection. If the problem persists, try a different input or cable. Also, avoid placing other electronics near the monitor that may cause interference.
How do I perform a factory reset?
Go to the OSD menu, navigate to Setup or System, and select Reset or Factory Reset. Confirm your selection. This will restore default settings but will not erase any saved user presets.
Where can I find the user manual or spare parts?
The user manual is available for free download on notice-facile.com. For spare parts like remote control or cables, contact Mitsubishi authorized service centers or visit the official website.
User questions about LDT323V MITSUBISHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual LDT323V - MITSUBISHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LDT323V by MITSUBISHI.
