WLM-2500 - Router SITECOM - Free user manual and instructions
Find the device manual for free WLM-2500 SITECOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Model | WLM-2500 |
| Brand | Sitecom |
| Wireless Standard | IEEE 802.11b/g/n |
| Maximum Wireless Speed | 300 Mbps |
| Frequency Band | 2.4 GHz |
| Number of Antennas | 2 external |
| WAN Ports | 1 x 10/100 Mbps Ethernet |
| LAN Ports | 4 x 10/100 Mbps Ethernet |
| USB Ports | 1 x USB 2.0 |
| Security | WEP, WPA, WPA2-PSK |
| Firewall | NAT, SPI |
| VPN Support | PPTP, IPSec pass-through |
| Dimensions (W x D x H) | 180 x 130 x 35 mm |
| Weight | 250 g |
| Power Supply | 9V DC, 0.6A |
| Power Consumption | 8 W (max) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, WAN, LAN 1-4, WLAN, USB |
| Mounting | Desktop, wall-mountable |
| Certifications | CE, FCC |
| Package Contents | Router, power adapter, Ethernet cable, quick start guide, CD-ROM |
Frequently Asked Questions - WLM-2500 SITECOM
How do I reset the Sitecom WLM-2500 router to factory defaults?
Locate the reset button on the back panel. Use a paperclip to press and hold the button for about 10 seconds until the power LED starts blinking. Release the button; the router will reboot with factory settings.
What is the default IP address to access the router's web interface?
The default IP address is 192.168.0.1. Open a web browser and enter this address. The default username is admin and the default password is admin (or blank).
How can I change the wireless network name (SSID) and password?
Log into the router's web interface. Go to Wireless Settings and change the SSID. For security, set a strong password in the Wireless Security section, choosing WPA2-PSK.
Why is my internet connection not working after setup?
Check that the modem is connected to the WAN port and powered on. Verify the internet connection type (PPPoE, Dynamic IP, etc.) in the WAN Settings. Ensure cables are secure and reboot both modem and router.
How do I update the firmware on the WLM-2500?
Visit the Sitecom support website, download the latest firmware for the WLM-2500. Log into the router, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Can I use the USB port for a printer or storage?
Yes, the USB port supports USB storage (USB flash drive or external HDD) for file sharing. Printer sharing is also supported via the router's print server function.
How do I set up parental controls on this router?
Log into the web interface and go to Access Restrictions or Parental Control. You can block specific websites, limit internet access times, and restrict content by keywords.
What should I do if I forgot the router's login password?
Perform a factory reset by pressing the reset button for 10 seconds. This will clear all settings, including the login password, restoring defaults (admin/admin).
Is the WLM-2500 compatible with IPv6?
Yes, the router supports IPv6. You can enable it under Advanced Setup > IPv6. Choose the appropriate connection type as provided by your ISP.
How can I improve the wireless range of my router?
Position the router centrally, away from obstructions. Adjust the antennas perpendicularly. Changing the wireless channel to a less congested one (e.g., 1, 6, or 11) can help. Consider upgrading antennas if detachable.
User questions about WLM-2500 SITECOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual WLM-2500 - SITECOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WLM-2500 by SITECOM.