WL-370 - Router SITECOM - Free user manual and instructions
Find the device manual for free WL-370 SITECOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Sitecom |
| Model | WL-370 |
| Dimensions (W x D x H) | 170 x 120 x 35 mm |
| Weight | Approx. 250 g |
| Power Supply | 5V DC, 2A via external adapter |
| Wireless Standard | IEEE 802.11g, backward compatible with 802.11b |
| Maximum Wireless Speed | 54 Mbps |
| Frequency Band | 2.4 GHz |
| LAN Ports | 4 x 10/100 Mbps Ethernet |
| WAN Port | 1 x 10/100 Mbps Ethernet |
| Antenna | 1 external fixed antenna |
| Security | WEP 64/128-bit, WPA, WPA2, MAC address filtering |
| VPN Support | PPTP, L2TP, IPSec pass-through |
| Firewall | NAT, SPI firewall |
| Management | Web-based interface, DHCP server |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Keep away from moisture, heat sources, and direct sunlight |
| Spare Parts / Repairability | Power adapter and antenna replaceable; other components not user-serviceable |
| General Information | Designed for home/small office use, supports up to 32 simultaneous users |
Frequently Asked Questions - WL-370 SITECOM
How do I reset the Sitecom WL-370 to factory defaults?
Locate the reset button on the back of the router. Use a paperclip to press and hold it for about 10 seconds until the power LED flashes. The router will reboot with factory settings.
What is the default IP address and login for the WL-370?
The default IP address is 192.168.0.1. Use username admin and password admin (or leave password blank). Change these after initial setup.
How can I improve the wireless range of my WL-370?
Place the router centrally, away from walls and metal objects. Avoid interference from cordless phones and microwaves. You can also change the wireless channel in the settings to a less congested one.
Does the WL-370 support WPA2 encryption?
Yes, it supports WPA2 (AES) along with WPA and WEP. For best security, choose WPA2-PSK with a strong passphrase in the wireless security settings.
How do I update the firmware on the Sitecom WL-370?
Go to the router's web interface at 192.168.0.1, navigate to Administration > Firmware Upgrade. Download the latest firmware from Sitecom's support site, then upload it via the interface. Do not power off during update.
Can I use the WL-370 as a wireless access point?
Yes, you can disable the DHCP server and connect it to another router via a LAN port. Then set the WL-370 to a static IP in the same subnet to use it as an access point.
What should I do if I forget the router's password?
Perform a factory reset as described above. This will restore the default admin password, allowing you to log in and set a new password.
Why is my internet connection unstable with the WL-370?
Check the WAN cable connection and ensure the DSL/modem is working. Try power cycling both devices. Also, update the firmware and avoid using channels with heavy interference. If problems persist, contact your ISP.
How do I set up port forwarding on the WL-370?
Log into the web interface, go to Advanced > Port Forwarding. Create a new rule with the service name, port range, protocol (TCP/UDP), and the local IP of the device. Save and apply.
Is the WL-370 compatible with Windows 10?
Yes, the router itself is compatible with any device that supports standard WiFi and Ethernet. Setup is done via web browser, so no specific OS driver is needed for the router.
User questions about WL-370 SITECOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual WL-370 - SITECOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WL-370 by SITECOM.