MINI MCR-SL-PTB - Uncategorized Phoenix Contact - Free user manual and instructions
Find the device manual for free MINI MCR-SL-PTB Phoenix Contact in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Signal Isolator / Converter |
| Brand | Phoenix Contact |
| Model | MINI MCR-SL-PTB |
| Input Signal | 0/4-20 mA, 0-10 V, RTD, thermocouple, potentiometer |
| Output Signal | 0/4-20 mA, 0-10 V (configurable) |
| Supply Voltage | 24 V DC (19.2-30 V DC) |
| Dimensions (W x H x D) | 6.2 mm x 93.1 mm x 101.2 mm |
| Weight | Approx. 60 g |
| Mounting | DIN rail (EN 60715) |
| Connection | Screw terminals (0.2-2.5 mm²) |
| Isolation | 3-way galvanic isolation (input/output/supply) |
| Protection Class | IP20 |
| Operating Temperature | -40°C to +70°C |
| Configuration | DIP switches and/or software |
| CE Compliance | Yes |
| Maintenance | No regular maintenance required; keep clean and dry |
| Cleaning | Wipe with dry cloth; do not use solvents |
| Safety Warnings | Use only specified power supply; observe national regulations |
| Spare Parts | Not user-serviceable; contact manufacturer for repairs |
| Manual Language | English, German, French, Italian, Spanish |
Frequently Asked Questions - MINI MCR-SL-PTB Phoenix Contact
How do I configure the MINI MCR-SL-PTB?
Configuration is done via DIP switches located on the side of the device. Refer to the manual for switch settings for different input/output types. Alternatively, use the Phoenix Contact Configuration Software available on their website.
What is the maximum wire size for the screw terminals?
The screw terminals accept wires from 0.2 mm² to 2.5 mm² (AWG 24-12). Use a screwdriver with a blade width of 0.6 x 3.5 mm for proper tightening.
Can I use this device with a 4-20 mA sensor?
Yes, the device supports 4-20 mA input. Set the DIP switches accordingly for current input. The output can also be configured for 4-20 mA or 0-20 mA.
What is the isolation voltage between input, output, and power supply?
The device provides 2.5 kV galvanic isolation between all three ports (input, output, and supply), ensuring safe operation in industrial environments.
How do I mount the device on a DIN rail?
Simply snap the device onto a standard 35 mm DIN rail (EN 60715). Ensure the locking mechanism engages securely. To remove, pull the locking lever at the bottom.
What is the power consumption of the MINI MCR-SL-PTB?
Power consumption is typically less than 1.5 W under full load. It is powered by a 24 V DC supply (19.2-30 V DC range).
Can I use this module for temperature measurement?
Yes, the module can be configured for RTD (Pt100, Pt1000) and thermocouple inputs (type J, K, T, etc.). Set the DIP switches and perform a calibration if necessary.
What should I do if the output signal is incorrect?
First, check the DIP switch settings match your signal type. Then verify wiring: input signal polarity and supply voltage. If the problem persists, test with a known signal source or reset the device by cycling power.
Is it possible to use the device in a hazardous area?
This standard version is not ATEX/IECEx certified for explosive atmospheres. For hazardous areas, use the MINI MCR-SL-PTB-EX variant with intrinsic safety barriers.
How long is the warranty for the product?
Phoenix Contact offers a 5-year warranty from the date of purchase, provided the product is used under normal conditions as specified in the manual.
User questions about MINI MCR-SL-PTB Phoenix Contact
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MINI MCR-SL-PTB - Phoenix Contact and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MINI MCR-SL-PTB by Phoenix Contact.