ATmega649 - Uncategorized Microchip - Free user manual and instructions
Find the device manual for free ATmega649 Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8-bit Microcontroller |
| Brand | Microchip |
| Model | ATmega649 |
| Series | ATmega |
| Core Architecture | AVR Enhanced RISC |
| Flash Memory | 64 KB |
| EEPROM | 2 KB |
| SRAM | 4 KB |
| Maximum Operating Frequency | 16 MHz |
| Operating Voltage Range | 2.7 V – 5.5 V |
| Number of I/O Pins | 54 |
| ADC Channels | 8-channel, 10-bit |
| Communication Interfaces | USART, SPI, TWI (I²C) |
| Package Type | 64-pin TQFP / 64-pin QFN |
| Dimensions (TQFP) | 14 mm x 14 mm |
| Weight (TQFP) | ~0.5 g |
| Operating Temperature Range | -40°C to +85°C |
| Typical Power Consumption (Active) | ~1.5 mA at 4 V, 4 MHz |
| JTAG Interface | Yes |
| Timer/Counters | 3 (8-bit and 16-bit) |
| PWM Channels | 6 |
| Watchdog Timer | Yes |
| Brown-out Detection | Yes |
| Maintenance and Cleaning | Store in anti-static, dry environment. Avoid mechanical stress. |
| Safety | ESD sensitive; observe handling precautions. |
| Spare Parts and Repairability | Not repairable; replace entire IC if faulty. |
| General Information | Manufacturer Microchip, introduced 2006. |
Frequently Asked Questions - ATmega649 Microchip
How to program the ATmega649?
Use an AVR programmer such as AVRISP mkII or Atmel-ICE via the SPI interface. Connect to the RESET, SCK, MISO, and MOSI pins. Use software like Atmel Studio or AVRDUDE to write the hex file.
What is the operating voltage range?
The ATmega649 operates from 2.7V to 5.5V. Ensure the supply voltage is within this range for proper functioning.
What is the difference between ATmega649 and ATmega128?
The ATmega649 has 64KB Flash and 4KB SRAM, while ATmega128 has 128KB Flash and 4KB SRAM. The 649 also includes a LCD controller? Actually ATmega649 does not have an LCD controller; note that ATmega649 has more I/O and features compared to smaller counterparts.
How to use the ADC on ATmega649?
Configure the ADC registers: ADMUX for reference and channel, ADCSRA for enable and prescaler. Start conversion by setting ADSC. Use interrupts or polling. Refer to the datasheet for detailed register descriptions.
Can I interface external memory?
Yes, the ATmega649 supports external memory interface with up to 64KB address space. Use the XMCRA and XMCRB registers to configure wait states and bus timing.
How to set the fuses on ATmega649?
Fuses control critical settings like clock source, boot loader size, and reset. Use an ISP programmer to read/write fuses. For example, to use internal oscillator, set CKSEL fuses. Caution: incorrect fuse settings may brick the device.
What debug interfaces are available?
The ATmega649 supports JTAG for on-chip debugging. Use a JTAG programmer (e.g., Atmel-ICE) to perform breakpoints, single-step, and memory inspection. Alternatively, debugWIRE? Actually debugWIRE is not supported on this device; JTAG is the primary debug interface.
Where can I find the full datasheet?
The datasheet is available on Microchip's website. Search for ATmega649 in the document library. It includes electrical characteristics, pinout, and register descriptions.
What is the maximum clock speed?
The maximum clock speed is 16 MHz at 5.5V. At lower voltages, the maximum frequency decreases. Ensure the supply voltage is adequate for your desired clock speed.
How to reduce power consumption?
Use sleep modes (Idle, Power-down, Standby). Disable unused peripherals, reduce clock frequency, and use internal oscillators. For maximum saving, use Power-down mode with wake-up from external interrupt.
User questions about ATmega649 Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ATmega649 - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATmega649 by Microchip.