MS 625 - Milk frother Rommelsbacher - Free user manual and instructions

Product Type	Milk Frother
Brand	Rommelsbacher
Model	MS 625
Dimensions (approx.)	120 x 120 x 210 mm
Weight	0.9 kg
Power Consumption	500 W
Voltage	220-240 V, 50/60 Hz
Capacity (for heating)	600 ml
Capacity (for frothing)	250 ml
Functions	Frothing cold milk, heating and frothing, hot milk only, hot chocolate
Material	Stainless steel jug, plastic handle
Safety Features	Auto shut-off, overheating protection, boil-dry protection
Cleaning	Non-stick coating, easy wipe clean; accessories dishwasher safe
Accessories Included	Frothing disc, stirring disc, lid
Warranty	2 years
Reparability	Spare parts available; user-replaceable whisk

Frequently Asked Questions - MS 625 Rommelsbacher

How do I froth milk with the Rommelsbacher MS 625?

Fill the jug with cold milk up to the max frothing level (250 ml), place the frothing disc on the shaft, select the cold froth function, and press the start button. The appliance will automatically stop when done.

What types of milk can I use?

The frother works best with cold whole milk (3.5% fat) for thick froth. Semi-skimmed and plant-based milks also work but produce less foam.

How do I clean the milk frother?

After use, unplug and let cool. Wipe the jug with a damp cloth. The lid, frothing disc, and stirring disc can be washed in warm soapy water or placed in the dishwasher (top rack). Do not immerse the base.

Can I heat milk without frothing?

Yes. Use the stirring disc instead of the frothing disc and select the hot milk function. The milk will be heated evenly without foam.

What is the maximum capacity for hot milk?

The maximum capacity for heating milk is 600 ml. Do not exceed the max fill line to avoid overflow.

Does the frother have an automatic shut-off?

Yes, the MS 625 features auto shut-off and overheating protection. It turns off automatically when the cycle is complete or if overheating is detected.

Can I use the frother to make hot chocolate?

Yes. Fill the jug with milk, add chocolate powder, and use the stirring disc with the hot milk function. Stir occasionally for best results.

What do I do if the frother stops working mid-cycle?

First, check if the overheating protection has activated. Unplug and let it cool for 15 minutes. Also ensure the max fill line was not exceeded. If problem persists, contact customer support.

Is the frother suitable for making cold foam?

Yes, the cold froth function allows you to create cold milk foam for iced coffees and cold beverages without heating.

Where can I find spare parts or accessories?

Spare parts like the frothing disc, stirring disc, and lid are available from Rommelsbacher authorized dealers or online shops. Use the part numbers listed in the manual.

USER MANUAL MS 625 Rommelsbacher

Abstract geometric pattern with interlocking vertical lines within a circular frame (no text or symbols)

ROMMELSBACHER

Black-and-white photo of a Romelsbacher French blender with milk being filled, accompanied by fresh bread and food items (no text or symbols on main objects)

MS 625

Milchaufschäumer

Milk frother

General safety advices......15

Safety advices for using the appliance....16

Application possibilities...... 17

Prior to initial use 18

Operating the appliance 18

Cleaning and maintenance 20

Troubleshooting 20

Recipes 22

Disposal/recycling 23

Bedienblende Control panel

Taste Programmwahl button for programme selection
Taste Start/Stopp button start/stop

— LEDs für Programmanzeige indicator for selected programme

Produktbeschreibung Product description

Close-up of a mechanical component with a coiled spring and central shaft (no visible text or symbols)

Circular petri dish with a single petri dish marked by a black dot and a diagonal line (no text or symbols)

Mexican Coffee spezial

We are pleased you decided in favour of this superior milk frother and would like to thank you for your confidence. It's easy operation and wide range of applications will certainly fill you with enthusiasm as well. To make sure you can enjoy using this appliance for a long time, please read through the following notes carefully and observe them. Keep this instruction manual safely. Hand out all documents to third persons when passing on the appliance. Thank you very much.

Intended use

The appliance is designed to be used in the household and similar areas, like for example:

• staff kitchens in shops, offices and other small commercial areas,
• agricultural holdings,
• by guests in hotels, motels, bed & breakfast and further similar living environments.
  Other uses or modifications of the appliance are not intended and may constitute considerable risks of accident. For damage arising from any improper use, the manufacturer does not assume liability. The appliance is designed for frothing, heating and stirring milk (domestic use only).
  The appliance is not designed for commercial use.

Technical data

Only connect the appliance to an isolated ground receptacle installed according to regulations. The rated voltage must comply with the details on the rating label. Only connect to alternating current!

Model: MS 625

Nominal voltage: 220-240 V\~ 50/60 Hz

Nominal power: 600 W

Standby consumption: < 0,3 W

Min. fi lling quantity: 150 ml

Max. fi lling quantity: 250 ml for frothing milk

500 ml for heating and stirring milk

Protection class: I

Dimensions (ca.): 15 x 21 x 11,5 cm

Scope of supply

• base unit
• glass jug ith lid
• stirrer

Check the scope of supply for completeness as well as the soundness of the product and all components (see product description page 3) immediately after unpacking.

WARNING: Read all safety advices and instructions. Non-observance of the safety advices and instructions may cause electric shock, fi re and/or bad injuries!

General safety advices

• Always keep children under 8 away from the product and the power cord.
• Cleaning and user maintenance must not be carried out by children unless they are older than 8 years and are supervised.
• Children from the age of 8 years and persons, not having the knowledge or experience in operating the appliance or having handicaps of physical, sensorial or mental nature, may use the appliance if they are supervised or have been instructed by a person responsible for their safety and have understood the risks involved.
• Never leave the appliance unattended during operation.
• Children must not play with the appliance.
• Packaging materials such as foil bags should be kept out of the reach of children.
• Prior to each use, check the appliance and the attachments for soundness, it must not be operated if it has been dropped or shows visible damage. In these cases, the power supply must be disconnected and the appliance has to be checked by a specialist.
• When laying the power cord, make sure that no one can get entangled or stumble over it in order to avoid that the appliance is pulled down accidentally.
• Keep the power cord away from hot surfaces, sharp edges and mechanical forces. Check the power cord regularly for damage and deteriorations. Damaged or entangled cords increase the risk of an electric shock.
• Check the power cord regularly for damage and deteriorations. If the power cord of this appliance is damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person in order to avoid any hazards.
• Do not misuse the power cord for unplugging the appliance!
• Never immerse the base unit, power cord and power plug in water for cleaning.

• Do not store the appliance outside or in wet rooms.

• This electrical appliance complies with the relevant safety standards. In case of signs of damage to the appliance or the power cord, unplug the appliance immediately. Repairs may be affected by authorised specialist shops only. Improper repairs may result in considerable dangers for the user.

• Improper use and disregard of the instruction manual void all warranty claims.

Safety advices for using the appliance

WARNING: Hazard of injury and burns!

• The surfaces of heating plate and glass jug as well as the jug's bottom side are getting hot during use and firstly stay hot after switch-off!
• Be careful when working with hot liquids!
• The jug is made of glass; breakage of glass can cause sharp and pointed edges!
• For pouring out, always take the glass jug at the handle!

Thus, act with care:

• Place the appliance on a stable and even surface and do not operate it in the vicinity of sources of heat (oven, gas flame etc.) or in explosive environments, where inflammable liquids or gases are located.
• Place it beyond children's reach.
• Before switching the appliance on, make sure that ...
  ... the heating plate and the jug's bottom side are clean ... the glass jug is placed properly on the heating plate ... a stirrer is attached and the lid is firm on the jug.

- In order to avoid spilling, the jug may be filled with max. 250 ml for making milk froth and with 500 ml for heating/stirring milk! In case of spilling, switch the appliance off immediately and pull the mains plug.

- Hot liquids with a temperature of more than 70 °C must not be processed!

- During operation, do not use any object to stir in the jug and never touch the running stirrer. To avoid injuries it is imperative to keep your hair, hands and clothes away from the running stirrer!

- The appliance has a delayed motor stop after it has been switched off – therefore, please wait until it has stopped before opening the lid!

- Always keep the lid closed during operation! Do not operate without a properly positioned lid!

• The glass jug must not be used on a normal heating plate!
• Only the original glass jug may be used on the heating plate. Do not other vessels like pots, pans etc.!
• Avoid any no-load operation and do not handle it with hands wet!
• The appliance is not designed for continuous operation.
• Pull the power plug after each use for safe switch-off.
• Always pull the mains plug before cleaning the appliance.
• Let the appliance cool down before cleaning or moving it.

Application possibilities

• The appliance is designed for
- making cold or warm milk froth
- heating milk and cocoa
- stirring cold milk and cocoa.

- 5 programmes can be selected::

	fine-pored, firm milk foam
	creamy milk foam
	cold milk foam
	hot milk
	hot chocolate made from small pieces of chocolate or cocoa powder

Prior to initial use

• Remove any protective films, advertising material and packaging material from the appliance and accessories.
• Before using the appliance for the first time, clean the appliance and all accessories in accordance with the cleaning instructions in this manual.

Operating the appliance

Be careful when working with hot liquids!

For pouring out, always take the glass jug at the handle!

• The appliance is driven by an innovative magnetic drive. Its indirect power transmission activates the stirrer inside the glass jug. Determined by this type of drive and by the swinging movements of the jug's contents, the appliance may generate a slight operating noise now and then – this is normal.
• The appliance is equipped with a heating. Thus, it is not necessary to heat the milk before preparation.
• To make firm and fine-pored milk foam, we recommend using cooled milk with a fat content of 1.5%.
• Allow the milk foam some extra time to stabilize.
• After preparing milk foam, a rest of liquid milk remains in the jug. This is normal – we recommend using this milk for your beverage.
• Let the appliance cool down between 2 operations.

NOTE: The appliance is equipped with a safety system. It only works if the stirrer is inserted into the jug, the jug is filled and the jug is correctly positioned on the heating plate.

Preparation

• Connect the power plug to a socket. The electronics start a short self-test, all indicator lamps light up briefly and a signal tone sounds. Once the self-test is complete, the LED for programme 1 lights up.
• You are now in selection mode and the appliance is ready to start.

NOTE: If no further button is pressed within 120 seconds, the appliance switches to standby mode and the LED for the selected programme expires. To return to selection mode, press either the programme selection button or the START/STOP button.

• Take the glass jug off the base station.
- Remove the lid from the glass jug.
- Attach the stirrer on the shaft inside the jug and latch it.

- Fill the glass jug. Observe the minimum and maximum filling quantity shown by the fill level indicator:

→ minimum fi lling quantity (lowest mark)
→ maximum fi lling quantity for frothing milk (lower MAX-mark)

→ maximum fi lling quantity for frothing milk (lower MAX-mark)

- Attach the lid. Ensure that the lid is securely in place. Take the glass jug at the handle and place it on the base station.

Programme selection

- Press the button programme selection to choose the desired programme. You can switch between the individual programmes by pressing the button several times.

- The currently selected programme is illuminated by the indicator light below the programme symbol.

NOTE: If no further button is pressed within 120 seconds, the appliance switches to standby mode and the LED for the selected programme expires. To return to selection mode, press either the programme selection button or the START/STOP button.

Starting the programme

• Press the START/STOP button. A signal tone sounds.
• The appliance starts the selected programme.
• At the end of the programme, the appliance stops automatically. A signal tone sounds.

Stop the programme prematurely

- Press the START/STOP button. The appliance stops the preparation and a signal tone sounds.

Emptying the glass jug

• Upon completion, remove the lid and take the glass jug at the handle for removing it from the base station.
• Remove/pour out the fi nished milk froth/milk.

→ Milk froth: scoop the milk froth into a vessel by means of a plastic spoon.

→ Liquids: pour the liquids into a vessel via the spout.

• Place the jug back on the base station or on a heat-resistant surface.
• Clean the appliance as well as all accessories directly after use.

Permanent switch off

- To switch off the appliance permanently and safely, disconnect the power plug from the mains after each use.

Cleaning and maintenance

Always unplug the appliance before cleaning!

Never immerse the base unit, power cord or plug in water or clean them under running water!

Attention! Hazard of burns: During operation the jug's surfaces are getting hot!

Let the appliance cool down before cleaning!

• Clean the appliance immediately after use and cooling so that residues will not dry up.
• All removable parts are suitable for cleaning in the dishwasher, we recommend cleaning by hand.
• Clean the base station with a moist cloth and wipe it dry.
• For removing the stirrer, take it at the little handle and pull it upwards.
• Clean glass jug, stirrer and lid with warm water and some dishwashing detergent and wipe them dry.
• The seal can be removed from the lid for cleaning. Clean the seal with warm water and a little washing-up liquid. Then push the seal back onto the lid.

Tip: You can also clean the glass jug by means of programme 1. Fill the jug with warm water and some dishwashing detergent and start programme 1 (stirrer must be attached). The appliance is cleaned on its own. Upon completion, rinse the glass jug with clear water thoroughly and wipe dry.

- Do not use any abrasives and solvents or sharp objects!

- Never use a steam jet appliance for cleaning!

Troubleshooting

Error Cause/remedial action
The appliance does not work • Check if power cord or plug is damaged.If they are damaged, do not operate the appliance.• Check if the plug is connected to the socket correctly.• Check the socket by plugging in another appliance.
Pilot lamp 1 is flashingPilot lamps 2, 3, 4 and 5 light up5-times signal tone	• Electronics error. Disconnect the appliance from the mains and do not use again.• Please contact your service-point.
Pilot lamp 2 is flashingPilot lamps 2, 3, 4 and 5 light up5-times signal tone	·Appliance is overheated.·Disconnect the appliance from the mains.Let the appliance cool down for at least 2 minutes, then retry to switch on.
Pilot lamp 3 is flashingPilot lamps 2, 3, 4 and 5 light up5-times signal tone	·Glass jug is not in the correct position or the stirrer has not been inserted.·Empty jug.·Check the position of the glass jug and the stirrer, check the filling quantity (observe the MIN-mark). Then reset the error using the START/STOP button and restart.
Pilot lamp 4 is flashingPilot lamps 2, 3, 4 and 5 light up5-times signal tone	·Cooling period between two preparation cycles is too short.·Disconnect the appliance from the mains.Let the appliance cool down for at least 2 minutes, then retry to switch on
The appliance in operation generates a slight operating noise	·This is normal and will not cause a failing of the appliance.
The appliance in operation generates a heavier operating noise	·Check whether the glass jug sits right in the middle of the base. By slightly turning or moving the jug to and fro it is mostly possible to reduce the noise.·Check whether the stirrer sits correctly on the take-up pin.In case the mentioned actions cannot reduce the loud operating noise, please contact your service-point.
Milk froth not satisfying • Milk is too warm.	·Use cold, skimmed milk.·Use programme 1 or programme 2.
Milk spills over • Observe the max. filling quantity:- for frothing milk: 250 ml- for stirring milk: 500 ml.
Not the whole milk is frothed • This is normal; you can use the milk for your beverage.
Milk does not become hot enough • The	max. temperature in programme 5 is 75 °C. Higher temperatures cannot be reached with this appliance.

Recipes

Our tips in advance:

√ You will get the best milk froth if you work with very cold, skimmed milk (1.5 % fat content) and a little patience. The fat content influences the result of the milk froth.
√ Fat and fatty ingredients (e.g. drinks powder containing cocoa) destroy the fine froth bubbles.
√ Cold milk froth is ideal as a low-fat, frothy 'topping' for cakes, fruit and desserts!

Hot beverages:

Hot almond milk

Heat 200 ml milk with 1 tsp sugar and 2 cl Amaretto liqueur and froth up. Served in a large glass with a straw, this is the perfect warming drink in winter.

Cappuccino

Consists of one third hot espresso, one third hot milk and one third milk froth.

Macchiato

Pour espresso into a tall glass with a 'sip' of hot milk and then top with plenty of milk froth.

Caffè Latte

A double espresso in a large cup of hot milk, topped with little or no milk froth.

Caffè Mocha

Stir 1-2 tablespoons of chocolate syrup into 200 ml of milk and heat. Then pour into a large cup and top up with coffee. Top with a few spoonfuls of milk froth and sprinkle with some cocoa powder.

Mexican Coffee spezial

Pour 2 cl tequila and 2 cl coffee liqueur into a tall glass, top with plenty of milk froth and then slowly and carefully pour in a double espresso. This creates different layers that give this coffee creation an original look.

And ...

Of course, you can mix, heat or froth milk with flavoured syrups of all flavours.

Cold beverages:

Cappuccino Freddo

Consists of one third each of cold espresso, well-chilled milk and cold milk froth.

Cool Summer Coffee

Stir cold milk with cold coffee ( 12 / 12 ) and a little sugar or flavoured syrup. Pour ice cubes into a long drink glass, pour the cold milk coffee over the top and top up with cold milk froth. Dust with cocoa powder, serve with a straw and enjoy cold!

Disposal/recycling

Packaging material

Do not simply throw the packaging material away but recycle it. Deliver paper, cardboard and corrugated cardboard to waste paper collection points. Also put plastic packaging material and foils into the specific collection containers.

PE-HD

PE-LD

PS

CPE

PAP

PAP

The printed or embossed markings indicate the materials which were used: PE stands for polyethylene (code 02 means high-density PE, 04 stands for low-density PE), PS stands for polystyrene and CPE for chlorinated polyethylene. PAP 20 means corrugated cardboard and PAP 21 other cardboard. All plastics are thermoplastics which are very easy and efficient to produce. They are also very easy to recycle and therefore can even have a smaller ecological footprint than comparable cardboard packaging.

Disposal information

According to the Waste Electrical and Electronic Equipment Directive (2012/19/EU), this product may not be disposed of with other household waste at the end of its service life. Therefore please submit it e.g. at a municipal collection point (e.g. recycling center) according to the laws of your country of residence for the recycling of electrical and electronic appliances. Your municipality or city administration will inform you about the disposal options.