CR 10 - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free CR 10 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | PCE Instruments |
| Model | CR 10 |
| Measurements | AC/DC Voltage, AC/DC Current, Resistance, Continuity, Diode Test |
| Display | LCD, 4000 counts, with backlight |
| Auto Range | Yes |
| Data Hold | Yes |
| Dimensions | 150 x 70 x 30 mm |
| Weight | 200 g (including batteries) |
| Power Supply | 1 x 9V battery (6F22) |
| Battery Life | Approx. 200 hours (alkaline) |
| Safety Rating | CAT III 600V |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 50°C (14°F to 122°F) |
| Humidity | < 80% RH (non-condensing) |
| Accessories Included | Test leads, battery, manual |
| Calibration | Recommended annually |
| Maintenance | Clean with dry cloth; no solvents |
| Repairability | Replaceable battery and fuse; professional service for internal repairs |
| Warranty | 2 years |
Frequently Asked Questions - CR 10 PCE Instruments
How do I change the battery in my PCE CR 10?
Open the battery compartment on the back, remove the old 9V battery, and insert a new one with correct polarity. Ensure the device is off before replacing.
What does the 'HOLD' button do?
The HOLD button freezes the current reading on the display. Press again to release and resume normal measurement.
How do I measure AC voltage?
Turn the rotary dial to the AC voltage setting (V~). Insert the black lead into COM and red lead into V/Ω. Touch the probes to the circuit and read the display.
What is the maximum voltage the CR 10 can measure?
The CR 10 can measure up to 600V AC or DC. Exceeding this may damage the device and pose a safety risk.
How do I test a diode?
Set the dial to the diode test position. Connect the red lead to the anode and black to the cathode. The display shows the forward voltage drop if the diode is good.
Why is the display showing '1'?
A '1' on the display indicates an overload or open circuit. Check your test leads and ensure the measurement range is not exceeded.
How do I clean my multimeter?
Use a soft, dry cloth to wipe the exterior. Do not use any solvents or abrasive cleaners. Keep the input terminals clean and dry.
What safety precautions should I follow?
Always use the correct input jacks and range. Never measure voltage greater than 600V. Remove test leads before opening the battery compartment. Follow all safety instructions in the manual.
How accurate is the CR 10?
Basic DC voltage accuracy is ±0.5% of reading + 2 digits. Accuracy varies by range and function. Refer to the manual for detailed specifications.
Can I measure current without breaking the circuit?
No, current measurement requires the meter to be in series with the circuit. Use the appropriate current jack and ensure the circuit is off before connecting.
User questions about CR 10 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual CR 10 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CR 10 by PCE Instruments.