FME - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free FME PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Measurement Device |
| Brand | PCE Instruments |
| Model | FME |
| Category | Measurement |
| Dimensions | Approximately 150 x 70 x 30 mm |
| Weight | Approximately 200 g |
| Power Supply | 2 x AAA batteries (1.5 V) |
| Battery Life | Approximately 50 hours of continuous use |
| Display | LCD with backlight |
| Measurement Functions | Voltage, Current, Resistance, Frequency |
| Measurement Range | Auto-ranging with manual mode |
| Accuracy | ±0.5% + 2 digits |
| Safety Rating | CAT III 600V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Humidity | ≤75% RH |
| Accessories Included | Test leads, battery, manual |
| Maintenance | Clean with dry cloth; do not use solvents |
| Calibration | Recommended annually for accuracy |
| Warranty | 2 years (excluding accessories) |
| Spare Parts Availability | Contact manufacturer or authorized dealers |
Frequently Asked Questions - FME PCE Instruments
How do I turn on the PCE FME?
Press and hold the Power button for 2 seconds until the display turns on.
What is the maximum voltage I can measure with the FME?
The FME can measure up to 600V AC/DC in CAT III environments.
How do I replace the batteries?
Turn off the device, open the battery compartment on the back, insert two AAA batteries with correct polarity, and close the cover.
Does the FME have auto power-off?
Yes, the device will automatically shut off after 15 minutes of inactivity to save battery.
How do I measure resistance?
Turn the dial to the Ω position, connect the test leads to the resistor, and read the value on the display.
What should I do if the display shows 'OL'?
'OL' means Overload. The measurement exceeds the selected range. Switch to a higher range or check the circuit.
Can I measure current with the FME?
Yes, but only up to 200mA. Use the mA or μA jacks and set the dial accordingly.
How do I clean the FME?
Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format.
What is the accuracy of the FME?
Basic accuracy is ±0.5% + 2 digits for DC voltage measurements.
User questions about FME PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual FME - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FME by PCE Instruments.