KWM 7152-7 B INV - Autre appareil ménager Koenic - Free user manual and instructions

Product Type	Washing Machine
Model	KWM 7152-7 B INV
Brand	Koenic
Capacity	7 kg
Spin Speed	1520 rpm
Motor Type	Inverter Motor
Energy Class	A+++
Dimensions (W x D x H)	60 cm x 54 cm x 85 cm
Weight	67 kg
Power Supply	220-240 V / 50 Hz
Water Consumption	45 L per cycle
Noise Level (Wash/Spin)	52 dB / 74 dB
Programs	Cotton, Synthetics, Delicates, Quick 15 min, Wool, Rinse & Spin, Drum Clean
Special Features	Child Lock, Delay Start, Eco Bubble, Anti-Crease, Inverter Motor
Display	LED Digital Display
Drum Material	Stainless Steel
Care and Maintenance	Clean detergent drawer and door seal regularly; run Drum Clean program monthly; clean filter after each use
Safety	Child lock, overflow protection, unbalanced load detection, anti-flood system
Spare Parts and Repairability	Replacement belts, door gasket, drain pump, control board available; user manual includes disassembly instructions
General Information	Freestanding, Front-loading, White color, Energy consumption 0.9 kWh/cycle

Frequently Asked Questions - KWM 7152-7 B INV Koenic

How do I install the washing machine?

Remove all packaging and transport bolts. Connect the water inlet hose to a cold water tap, and the drain hose to a standpipe or sink. Plug into a grounded outlet. Level the machine using the adjustable feet.

What should I do if the machine does not start?

Check if the door is properly closed, the water supply is turned on, and the machine is plugged in. Ensure the program selector is not at 'Off' position. If it still doesn't start, try resetting by unplugging for 2 minutes.

How to clean the drum?

Run the 'Drum Clean' program with an empty machine. Add a washing machine cleaner or a cup of white vinegar to the detergent drawer. This helps remove bacteria and odors.

Why is the machine vibrating excessively?

Ensure all transport bolts are removed. Check that the machine is level by adjusting the feet. The load may be unbalanced; try redistributing clothes evenly. Do not overload the drum.

How do I clean the filter?

Open the filter cover at the bottom front, place a towel below to catch water. Turn the filter counterclockwise and pull it out. Clean under running water and replace.

What does error code E10 mean?

Error E10 indicates a water supply issue. Check that the water tap is fully open and the inlet hose is not kinked. Clean the inlet valve filter if clogged.

Can I use a different detergent?

Yes, you can use any commercial detergent suitable for automatic washing machines. For best results, use high-efficiency (HE) detergent. Avoid using too much detergent to prevent oversudsing.

How to activate the child lock?

Press and hold the 'Child Lock' button for 3 seconds until the lock symbol appears on the display. To deactivate, press and hold again for 3 seconds.

What is the delay start feature?

The delay start allows you to set the machine to begin a wash cycle at a later time. Press the 'Delay Start' button and select the desired delay in hours (up to 24). Confirm by pressing the start button.

Where can I find spare parts?

You can order genuine spare parts from authorized Koenic service centers or online retailers. Use the model number KWM 7152-7 B INV to ensure compatibility. Common parts include door gaskets, drain pumps, and belts.

USER MANUAL KWM 7152-7 B INV Koenic

Line drawing of a white front-loading washing machine with two circular wheels and a digital display (no text or symbols)

Total 17 From 18 32 From 19 47

Intron GmbH

In the

E.C. Incented

1.0% 开放日

9.47A 01:18-14

[Non-Text]

图30M712278W220517-901

CE

• This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are being supervised or have received instructions concerning the use of the product in a safe way and understand the hazards involved.
  • Children shall not play with the product.
• Cleaning and user maintenance shall not be carried out by children unless they are supervised.
  • Children less than 3 years should be kept away unless continuously supervised.
• A damaged power cord may only be replaced by an authorised service agent in order to avoid hazards.
• The maximum mass of dry clothes to be used in the product is 7 kg.
• The ventilation openings of this product must not be obstructed, e.g. by carpet.
• This product is connected to the water mains. Consider the minimum and maximum permitted inlet water pressure, see chapter Technical Data. Consider all instructions about the installation for detachable hose-sets and use new hose-sets for installation. Do not reuse old hose-sets.

English

Safety instructions

- The product is designed for the washing of normal household quantities in the home, or in household-like, non-commercial environments. Household-like environments include staff kitchens in shops, offices, agricultural and other small businesses or for use by guests at bed-and-breakfast establishments, small hotels and similar residential facilities.

• Read this user manual thoroughly before first use and pass it on with the product. Pay attention to the warnings on the product and in this user manual. It contains important information for your safety as well as for the use and maintenance of the equipment.
• Use the product only for its intended purpose and with recommended accessories and components. Improper use or wrong operation may lead to hazards.
• Never leave the product unsupervised while it is switched on.
• Never immerse electrical parts of the product in water or any other fluids during cleaning or operation. Never hold the product under running water.
• Do not under any circumstances attempt to repair the product yourself. For servicing and repairs, please consult an authorised service agent (e.g. damaged power cord, product has been dropped during installation, etc.).
• The mains voltage must match the information on the rating label of the product.
• Avoid damages to the power cord that may be caused by kinks or contact with sharp corners.

• Keep this product including power cord and power plug away from all heat sources such as ovens, hot plates and other heat-producing products/objects.

• Only unplug from the power socket by the plug itself. Do not pull on the cord.

• Unplug the product ...
• when the product is not being used,
• in case of malfunctions,
• before attaching / detaching accessories and
• before cleaning the product.
• Use this product in dry indoor areas only and never outdoors.
• Never use, expose or put the product near to: - direct sunlight and dust;
• fire (fireplace, grill, candles), water (water splashes, vases, bath tub) or heavy moisture.
• This product is not intended for commercial use. It is designed for household use only.
• Important! Check to ensure that the product is in a serviceable condition before use. The product shall not be used if it shows any signs of damage or it's suspected to be defect.

Congratulations!

Thank you for your purchase of a KOENIC product. Please read this manual carefully and keep it for future reference.

Intended use

This product is designed for washing clothes and textiles. Any other use may result in damage to the product or injuries. This product is designed for household use only and not intended for commercial use.

Imtron GmbH assumes no liability for damage to the product, for property damage or for personal injury due to careless or improper usage of the product, or usage of the product which does not meet the manufacturer's specified purpose.

Before first time use

Carefully remove the product and accessories from the original packaging. It is recommended to keep the original packaging for storage. If you wish to dispose of the original packaging, please observe applicable legal provisions.

Should you have any questions regarding proper disposal, contact your local waste management center.

Inspect the delivery contents for completeness and damages. Should the delivery contents be incomplete or damaged, contact your sales outlet immediately.

After unpacking, please refer to chapter

Cleaning and care.

Warranty and spare parts

The warranty period of the product, as well as the applicable conditions of the warranty can be found in the warranty card provided with the product. The spare parts, which are listed in the corresponding ecodesign directive, can be obtained by contacting the customer service center, for a period of at least 7 years, respectively 10 years.

Content

1 x Washing machine

1 x User manual

1 x Warranty card

Controls and components

A Control panel

A1 Program selector and off switch

A2 Display

A6 Temperature selection button

Temperatura

B Detergent drawer
C Door with window
D Door handle
E Water connection incl. hose
F Sewage hose
G Transport restraints
H Adjustable feet
Lint filter
J Power cord with plug
K Washing drum

Transport restraints must be removed before the first use as described in chapter Installation.

English

Installation

Note:

The washing machine is equipped with power cord and plug and needs sewage and tap water connections. Before installation, make sure that a suitable wall outlet is at the desired place of installation. Consider the dimensions (chapter Technical data) of the product for placing and installation.

Caution

• Before initial operation the transport restraints must be removed from the backside of the unit. Operating the washing machine with mounted transport restraints leads to serious damages.
• Keep the transport restraints for later use. Never transport the device without correctly mounted transport restraints!

Fig. 1 Loosen the four transport restraints with a wrench (13 mm) and unscrew them completely. Insert the 4 supplied blind plugs in the holes.
Fig. 2 Place the washing machine on an even, horizontal and steady surface. For levelling the feet are adjustable and can be screwed in or out.

- Unscrew the lock nuts with an open-end wrench (17 mm).

- Turn the feet to the right to screw them in and to the left to unscrew them.

- Use a spirit level to check whether the appliance is levelled. If the appliance is not standing horizontally or is tilting the feet must be adjusted again.

- If the unit is levelled and does not tilt, tighten the nuts with the open-end wrench.

Note:

Note the following, when placing the device on a platform:

The device might move during spinning and could fall of a platform. To prevent this, the feet must be secured with retaining tabs (available in specialized stores).

Fig. 3 The washing machine must be connected to a drain.

• The drain hose is already fixed to the sewage connection. Pull the hose out of the clamps and unwind it.
• Connect the other end to the drain pipe (option A or B). Observe the max. height of the hose end.

Note:

• To avoid leakage, a hose clamp should be used to correctly install the outlet hose.
• Suitable hose holders are available as optional accessories.

Fig. 4 Connect the water inlet to the water system (3/4") using the supplied hose and make sure that everything is connected correctly and firmly. The water pressure must be between 0.05 MPa and 1 MPa. A pressure reducing valve must be used if the water pressure exceeds 1 MPa. The correct installation of the water connection should be checked on a regular basis.

Note:

• If the water pipes are new or have not been used for an extended period of time, allow a certain amount of water to drain until you are sure that the water is clear and free of foreign objects.
• If this point is not observed, there is a risk that the water inlet will become clogged and the unit will be damaged.

Fig. 5 Plug the mains plug into a suitable socket.

Preparation Before first use

• Make sure the transport restraints on the back of the unit have been removed.
• Remove all accessories and other materials from the washing drum.
• Before washing clothes for the first time, run the appliance without any clothes but some detergent in the "Cotton" program, see Start washing.

Note:

Before using the product for the first time, make sure, that all hydrophilic connections of the product are correctly sealed and connected to both the device as well as the water mains. Check all connections periodically to avoid possible leakage.

Calibration

It is recommended to calibrate the washing machine.

1. Empty the washing machine

2. Switch the washing machine on and within 10 seconds press spin button Wirowanie and start delay button Opóźniony start at the same time so that [t19] is shown in display.

3. Press the Start/Pauza button ▶II to start the washing machine and wait until [****] is displayed. The calibration was successful if the machine comes to a complete stop and any value is displayed in the display. It was unsuccessful if no value is displayed at the end.

Operation

Fig. 6 Preparation of the garments

Caution

• Do not wash fabrics that are not suitable for machine wash. Observe the instructions on the care label of the laundry.
• Hard or pointed foreign objects (eg. nails, coins) can damage laundry and components.

• Never wash laundry soaked with gasoline, thinner, alcohol or solvents.

• Check the pockets of all laundry and empty them. Make sure, that no lighters, coins etc. are left in the pockets.

• Before washing, remove dirt, stains and hair from the laundry, e.g. by pre-soaking and pre-washing by hand.
• Sort the laundry according to colors and the washing procedures and washing temperatures indicated on the care labels. Do not wash white laundry together with coloured laundry but separate. Newly bought coloured laundry must be washed separately.
• Turn applications such as buttons and embroideries inwards. If necessary, close zippers, buttons or hooks before washing, and tie loose straps or loops together.
• Wash brassiere in a laundry bag to prevent the steel hangers from loosening. In particular, fine textiles such as curtains, crochet work or small articles (socks, handkerchiefs, neckties, etc.) should be washed in a closed laundry bag.
  • Always remove removable parts such as hooks, eyelets, e.g. from curtains.

English

• During the washing of large and heavy single items such as bedclothes, covers, bath towels, jeans, lined winter jackets, etc., the drum can become unbalanced especially during spinning. To minimize imbalances always wash several clothes together as one load.
• Linting clothes should be washed separately, otherwise you will have visible lint on all clothes, especially on black clothes.

Fig. 7 Fill the laundry

• Untangle the garments and place them neatly into the washing drum.
• It is recommended to use the max. loading capacity. Do not overload the washing machine. Do not cram the laundry in the washing drum but load it in a way that the laundry is still being circulated during the washing process. Different sizes and thicknesses of the laundry influence the loading capacity.
• Close the door, making sure that no laundry is trapped between the door and the seal.

Selecting and filling in detergent

Caution

• Keep detergents out of the reach of children!

• Observe the instructions of the detergent regarding dosage and storage.

• Only use detergents suitable for washing machines and make the right selection, taking into account the kinds of laundry to be washed (cotton, colored, white etc.).

• Do not use bleach, as it can damage the washing machine and laundry.

Fig. 8 4. Open the detergent drawer. Note the different compartments:

A: Detergent for main wash, option 1 for washing powder, option 2 for liquid detergent
B: Fabric softener for rinsing
C: Detergent for pre-wash

1. Fill in laundry detergent and fabric softener according to the manufacturer's instructions.
   Note on foam detection: If too much detergent is used, excessive foam is formed. The foam formation is automatically checked and excessive foam is removed.
2. Close the detergent drawer by pushing it in completely.

English

Start washing

1. Turn on the washing machine with the on/off switch.
2. Use the program selector to select a suitable program and, if necessary, a suitable additional function. Please refer to the following Program table.
3. Use the Temperatura button to change the temperature if the preset temperature does not meet your requirements. The higher the temperature the more energy is consumed.
4. If necessary use the Wirowanie button to select a different spin speed if the preset speed does not meet your requirements. The higher the spin speed, the drier but also more creased the laundry will be. High speeds also reduce the life of the washing machine.

Note:

Only use low spin speeds for delicate garments.

1. By pressing the additional function button Funkcja, select one of the additional functions pre-wash ⊥ or extra rinse 🌐 The washing time increases or decreases accordingly.

2. Start the washing process by pressing the Start/Pauza button. The door will be automatically locked once the washing process is started and the lock symbol will light up.

3. Press the timer button Opóźniony start to set a later time for the machine to start. By pressing the button several times, a start time of 1 to 24 hours can be set in 1-hour increments. To do so, follow the steps 1 to 5, then use the Opóźniony start button to set the start time, wait until the display shows the wash time and then press the Start/Pauza button. If the preset time has elapsed, the washing machine will automatically turn on and the washing time will be shown on the display.

Caution

The door may only be opened if the appliance is not running, e.g. after a washing program has is finished. Do not try to open the door while the appliance is running.

Automatic load detection

When using the Eco 40-60 mode, the automatic weighing function detects the weight of the laundry and automatically adjusts the washing time and amount of water for an optimal washing process.

English

Fig. 9 Washing Program table

Program
Program nameShort explanation of the program and for which fabrics it's suitable	Max load in kgTemperature that can be selected in °CSpin speed than can be selected in 1/minOther settings which can be selected with this program
CottonHard-wearing fabrics, heat resistant fabrics made of cotton or linen	Max. 7 kgCold/20/30/40/60/900/400/600/800/1000/1200/1400Timer, Prewash, Extra rinse
SyntheticSynthetic articles, for example: shirts, coats, blending.While washing knitted textiles, detergent quantity shall be reduced due to its loose string construction and increased forming of foam/bubbles	Max. 3.5 kgCold/20/30/40/600/400/600/800/1000/1200Timer, Prewash, Extra rinse
Baby CareSuitable for baby laundry. Keeps the laundry soft and smooth to protect the delicate baby skin	Max. 3.5 kg600/400/600/800/1000/1200/1400Timer, Extra rinse
MixMixed load of cottons and synthetic fabrics	Max. 7 kgCold/20/30/40/600/400/600/800/1000/1200/1400Timer, Prewash, Extra rinse
SportswearSports and leisure wear made from microfiber fabricsNote:Laundry must not be treated with fabric softenerClean the detergent drawer thoroughly before washing, in order to remove fabric softener residue	Max. 3.5 kgCold/20/30/400/400/600/800/1000/1200/1400Timer, Prewash, Extra rinse
Quick 15'Extra short program of approx. 15 minutes, suitable for small items of lightly soiled laundry	Max. 2 kgCold/20/300/400/600/800Timer, Extra rinse
45' Rapid cycleWashing few and not very dirty clothes quickly.	Max. 2 kgCold/20/30/400/400/600/800/1000/1200Timer, Extra rinse
JeansFor Jeans and Denim textiles	Max. 6.5 kgCold/20/40/60/900/600/800/1000/1200Timer, Prewash, Extra rinse
WoolHand or machine-washable wool or richwool textiles. Especially gentle wash programme to prevent shrinkage, with longer programme pauses (textiles rest in wash liquor)Note:· Wool is of animal origin, e.g. angora, alpaca, llama, sheep· Use a detergent that is suitable for machine washing wool	· Max. 2 kg· Cold/20/30/40· 0/400/600/800· Timer, Extra rinse
eco 40-60*Temperature not selectable, suitable for laundry washable at about 40-60 °C	· Max. 7 kg· /· 1400· Timer
BedclothesWashing of bedclothes	· Max. 7 kg· 40· 1000· Timer, Prewash, Extra rinse
20 °CWashing brightly colored clothes for better protection of colors	· 3,5 kg· Cold/20· 0/400/600/800/1000/1200· Timer, Extra rinse
Spin onlyExtra spin with selectable speed	· Max. 7 kg· /· 0/400/600/800/1000/1200/1400· Timer
Rinse & SpinExtra rinse or spin with selectable speed	· Max. 7 kg· /· 0/400/600/800/1000/1200/1400· Timer, Extra rinse
Steam WashWashing of clothes with additional steam for deep cleansing	· Max. 3.5 kg· 40· 1000· Timer, Prewash, Extra rinse

\* Standard program: eco 40-60.

The eco 40-60 program is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and this program is used to assess the compliance with the EU ecodesign legislation (according to (EU) 2019/2023).

Note:

A 90°C program is manually programmable.

English

Child protection

Fig.10 Once the child protection is activated, the chosen settings cannot be changed. The washing machine can only be switched off with the program selector, whereby settings and wash progress are saved and the washing process can be continued after switching the machine back on. The child protection can only be activated if the washing machine operation was started or is running either directly or by time delay.

1. Activation: Press the Temperatura and Funkcja buttons at once for at least 3 seconds. The corresponding symbol of the control panel indicates the child protection

2. De-activation: Press the Temperatura and Funkcja buttons again at once for at least 3 seconds. The corresponding symbol of the control panel turns off.

Disabling the alarm sound

To permanently deactivate the signal tone, press the Wirowanie button for at least 3 seconds while the washing machine is switched on. To turn on the signal, press the Wirowanie button again for at least 3 seconds while the washing machine is on.

Cleaning and care

Warning

• When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning mechanisms and tools may scratch the surface(s).
• Switch off the washing machine and let it cool down completely before cleaning.
• Clean the exterior surfaces of the product with a slightly damp cloth and dry them well. Make sure that no water enters the product interior (e.g. at the switches).

Fig. 11 Cleaning the detergent drawer

• Pull out the drawer. Press the tab marked with an arrow above the fabric softener compartment and pull out the drawer completely.
• Wash the chambers with water.
• If necessary, use a soft brush to clean the housing.
• Insert the detergent drawer.

Fig. 12 Clean the filter of the lye pump

Caution

• Never operate the washing machine without a filter.
• The filter of the lye pump prevents foreign objects from entering and possibly damaging the pumping system.
• Clean or check the filter regularly depending on the frequency of use, approximately once a month.
• Check the filter if the water is not pumped out or if the noise is increased during pumping.
• Before opening the service flap, place a big cloth in front and below the flap. Large amounts of water may leak when removing the filter.

• Make sure that all water has been pumped out during the previous wash cycle, then turn off the power and unplug the power cord.
- Place a big piece of cloth and a collecting tray in front of the service flap to catch any leaking water.
- Open the maintenance flap.
- Turn the filter cover to the left. Catch leaking water!
- Clean the filter under running water and remove any foreign objects.
- Insert the filter and turn it to the right. Make sure that the filter is properly fixed so that no water can leak.
- Close the maintenance flap.

Fig. 13 Inlet filter

Caution

• Close the water supply!
  • After cleaning, always make sure that the water hose is properly installed and no water leaks.

Filter at the tap

Clean the filter if there is an insufficient flow of water when the water tap is open.

• Unscrew the supply hose from the water tap.
• Wash the inlet filter under running water.
• Reconnect the supply hose. Make sure it is properly sealed and doesn't leak.

Filter at the washing machine

Clean the filter regularly, approximately every three months.

• Unscrew the supply hose on the back of the unit.
• Clean the filter with a small brush.
• Reconnect the supply hose and ensure it's properly sealed and doesn't leak.

Drum clean

• Use chlorine-free cleaning agents and a soft sponge for cleaning the drum. Do not use abrasive cleaners or means, e.g. steel wool, to clean the drum.
• When washing with low temperatures and / or liquid detergents, there is a risk of germs and odors forming in the washing machine.
• If there is an odor noticeable in the drum, run the Drum Clean without laundry. It's not required to add detergent for this.
• It's recommended to wash the drum every month.

Descaling

Descaling is not necessary if the detergent is dosed correctly. If you want to descale the drum, proceed according to the descaling agent manufacturer's instructions. You can obtain suitable descaling agents from retailers.

English

Error codes

Code Meaning Possible causes Solution
E30 Door lock problem • Door is	not closed properly • Restart after the door has been closed again.
E10 Water injection problem while washing	• Tap is closed or water flows too slow.• Inlet valve filter is blocked.• Inlet hose is twisted	• Open the tap or wait till the water supply becomes normal• Check the inlet valve• Straighten the hose
E12 Water overflow • Water level in drum exceeds a certain level• Water inlet valve defect• Water level sensor or control switch defect	• Restart the appliance• Contact the customer service• Contact the customer service
E21 Drain problem during washing	• Outlet hose is blocked or twisted• Drain pump is blocked	• Clean and straighten the outlet hose.• Clean drain pump filter
EXX Other causes • Other causes	• Restart the appliance, if the	Problem persists, contact the customer service

Troubleshooting

If there are any problems during operation, please refer to the following table. If the problems cannot be solved as indicated under Solution or if spare parts for self-repair are necessary, please contact the service center. The respective hotlines are noted in the warranty card, provided with this product. Please note, that improper self-repair can lead to hazards as well as voidance of the warranty and should be refrained from, if in doubt.

Problem Possible causes Solution
Product does not work and/or indicator/display does not light	Interrupted power supply	Check the power supply
Door cannot be opened	Machine's protection mechanism is active	Disconnect from the power
Heating fault	NTC is damaged or heating pipe is aging	Contact the service center
Water leakage	Connection between inlet pipe or outlet hose and tap or washing machine is not tight.Drain pipe is blocked	Check and fasten the water pipesClean up outlet hose
Water is overflowing from the bottom of the machine	The inlet pipe is not connected firmly.Outlet hose has water leakage	Fix the inlet pipeReplace the drain hose
Washing result is not satisfying	The clothes are to dirtyInsufficient detergent quantity	Select a proper programAdd proper detergent quantity
Abnormal noise, great vibrations	Check if transport restraints have been removedMachine is not installed on solid floorCheck for loose objects inside drum e.g. detached ornamentsAdjust the feet of the machine

Recommendations on the type of detergent

Consider below notes in order to improve the cleaning result, while reducing the energy consumption as well as environmental impact:

- Dose the detergent based on the recommendations / requirements of the supplier, while considering the mass and soiling level of the laundry.

- Do not mix different detergents and / softeners.

- Do you use detergents that are based on solvents or corrosive ingredients.

- Avoid overdosing detergents.

- Use detergents, that are activated at lower temperatures to save energy.

Attention: Wrong dosing of detergents, softeners or other additives may damage the product.

Below table shall serve as a guideline for the correct choice of the program, temperature and detergent:

Type of clothing Program	Program	Temperature of the washing program	Recommended detergent
White textiles, made from cotton or other organic fibers	Baumwolle (Cotton) 20°C	-90°C General purpose laundry detergent
Colored textiles, made from cotton or other organic fibers	Mischprogramm (Mix) 20°C	-90°C Color-care laundry detergent
Delicate textiles, e.g. silk	Schnell 15 min (quick 15 min)	<20°C Mild detergent
Textiles made from synthetic fibers and mixed textiles	Synthetik (synthetic) 20°C	-60°C Specialty laundry detergent
Sports textiles made from micro fibers	Sportprogramm (sport program)	20°C - 60°C Specialty laundry detergent
Woolen textiles Wolle	(wool) 20°C - 40°C Specialty laundry detergent / mild laundry detergent
Baby clothing Baby-wäsche (baby clothing)		20°C - 60°C Specialty laundry detergent
Jeans / Denim Baumwolle (cotton) Mischprogramm (mix)		20°C - 90°C General purpose laundry detergent / Specialty laundry detergent

Note: The table serves only as a reference and a general recommendation. For the correct dosage as well as temperature, always observe the information in your clothing as well as the on the packaging of the detergent.

English
Program parameters according to (EU) 2019/2023 Annex II No 9, 2

Program Capacity (kg)		Program Duration (h:min)	Energy consumption (kWh/cycle)	Water consumption (liters/cycle)	Maximum temperature reached* (°C)	Remaining moisture content (%)	Spin Speed (rpm)
eco 40-60 rated (7,0)		03:28 0.768 52.5	42 52 1350
eco 40-60 rated (3.5)		02:42 0.428 45.1	32 54 1350
eco 40-60 rated (2,0)		02:42 0.252 34.4	26 52 1350
20°C rated (3.5) 01:01		0.100 45 20 65 1	000
Cotton ≥60°C rated (7,0)		03:39 1.392 65	60 55 1400
Mix program rated (7,0)		01:20 0.710 60	40 65 1000
Quick wash 15 min	rated (2,0)	00:15	0.030	40	Cold	75	800
Jeans	rated (7,0)	01:40	1.066	65	40	70	800
Synthetics	rated (3.5) 03:18	0.698 41 40	35 1200
Bed ware	rated (7,0) 01:48	0.754 65 40	65 1000
baby clothing	rated (7,0)	02:01	1.179	65	60	70	800
Wool	rated (2,0) 01:07	0.410 60 40	80	600
Rinse & spin	rated (7,0)	00:20	0.045	24	-	65	1000
Spin only	rated (7,0)	00:12	0.040	-	-	65	1000
drum clean	-	01:18	1.190	17	90	-	-

Note: The values given for programs other than the "eco 40-60" program are indicative only
* for minimum 5 minutes inside the laundry being treated in the washing cycle

46

Notes concerning the energy- and water consumption of the washing machine

• The most efficient programs in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
• Program time as well as energy- and water consumption depend on various factors, such as weight and type of the laundry, chosen functions, characteristics of the water etc.
• For only slightly or normally soiled laundry, decrease the temperature of the program, as the device uses less energy this way
• Refrain from using the pre-wash function to save water as well as energy
• Use the maximum spin speed available if the laundry will be dried in a dryer afterwards, as the remaining moisture content will be lower, which in turn saves energy during the later drying process. Note, that noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
• Load the household washing machine up to the maximum capacity of each program to reduce the energy- and water consumption.

Technical data

Rated Voltage: 220 - 240 V\~, 50 Hz

Rated Power: 2000 W

Protection class : I

Protection degree : IPX4

Max. Capacity: 7 kg

Inlet water pressure : 0.05 - 1 MPa

Inlet water temperature : Cold

Dimension: 595 x 495 x 850 mm