PROTEUS ODEON - Lighting Elation - Free user manual and instructions
Find the device manual for free PROTEUS ODEON Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moving Head Wash Light |
| Brand | Elation |
| Model | PROTEUS ODEON |
| Light Source | 400W RGBWA+UV LED Engine |
| Beam Angle | 5° - 50° motorized zoom |
| Pan Range | 540° |
| Tilt Range | 270° |
| Dimensions (L x W x H) | 405 x 310 x 585 mm |
| Weight | 22.5 kg |
| Power Consumption | 600W |
| Power Supply | 100-240V, 50/60 Hz (auto-ranging) |
| Control Protocols | DMX512, RDM, Art-Net, sACN |
| DMX Channels | 18/25/36 (selectable) |
| Housing Material | High-impact flame-retardant plastic |
| Cooling System | Active fan cooling with temperature control |
| IP Rating | IP20 (indoor use only) |
| Main Functions | Full color mixing (RGBWA+UV), zoom, strobe, dimmer, pan/tilt, built-in macros |
| Maintenance | Clean lens with soft cloth; check fan filters monthly; firmware updates via USB |
| Safety Features | Overheat protection, safety cable attachment point, auto power-off on movement error |
| Spare Parts & Repairability | Modular design; replaceable LED engine, power supply, fans, and PCBs |
| Warranty | 2 years limited warranty (excluding lamps) |
Frequently Asked Questions - PROTEUS ODEON Elation
How do I reset the pan/tilt movement on the PROTEUS ODEON?
Press the MENU button, navigate to FIXTURE SETTINGS, then select PAN/TILT RESET. Confirm with ENTER.
What type of DMX cable should I use?
Use a shielded DMX512 cable with 5-pin XLR connectors. Maximum cable length is 300m.
Can I use the fixture outdoors?
No, the PROTEUS ODEON has an IP20 rating and is designed for indoor use only. Exposure to moisture may cause damage.
How often should I clean the fixture?
Clean the front lens after each use to remove dust and smudges. Check fan filters monthly and replace if clogged.
What is the correct way to mount the PROTEUS ODEON?
Use a clamp (not included) on the omega brackets. Always secure with a safety cable to a separate support.
How do I update the firmware?
Download the latest firmware from elationlighting.com, save to a FAT32 USB drive, insert into the fixture's USB port, and follow the on-screen instructions.
The fixture is not responding to DMX. What could be wrong?
Check that the DMX address matches your controller, verify cable connections, and ensure termination is enabled on the last fixture.
Can I replace the LED engine myself?
Yes, the LED engine is user-replaceable. Disconnect power, open the service panel, unplug the old engine, and install the new one. Refer to the service manual.
What is the maximum ambient temperature for operation?
The fixture operates safely in ambient temperatures from 0°C to 40°C. Higher temperatures may trigger thermal protection.
How do I enable Art-Net mode?
Go to CONTROL SETTINGS in the menu, set DMX MODE to ARTNET, and configure the IP address and universe via the NETWORK menu.
User questions about PROTEUS ODEON Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual PROTEUS ODEON - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PROTEUS ODEON by Elation.