Limelight Par S - Lighting Elation - Free user manual and instructions
Find the device manual for free Limelight Par S Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Model | Limelight Par S |
| Brand | Elation |
| Light Source | 7 x 10W RGBWA LEDs |
| Beam Angle | 25° |
| DMX Channels | 6/11 channel modes |
| Control Protocol | DMX512 |
| Power Consumption | 120W |
| Input Voltage | 100-240V AC, 50/60Hz |
| Dimensions (L x W x H) | 10.6 x 10.6 x 12.2 in (270 x 270 x 310 mm) |
| Weight | 7.5 lbs (3.4 kg) |
| Housing Material | Aluminum and plastic |
| Cooling System | Fan cooled |
| IP Rating | IP20 |
| Operating Temperature | -10°C to 40°C |
| Maintenance | Clean lens with mild cleaner; ensure ventilation not blocked |
| Safety | Disconnect power before servicing; surface may become hot |
| Spare Parts | LED module, power supply, fan, DMX board |
| Repairability | Modular design allows replacement of faulty components |
| Included Accessories | Power cable, DMX cable, gel frame, mounting bracket |
Frequently Asked Questions - Limelight Par S Elation
How do I set the DMX address on the Limelight Par S?
Use the menu buttons on the rear panel. Press Menu to enter setup, navigate to DMX Address, set using Up/Down, then press Enter.
Can I run this fixture in standalone mode without a DMX controller?
Yes, select a built-in program via the menu. Options include Auto, Sound Active, and Master/Slave modes.
What is the maximum number of units I can power link?
At 120V, you can power link up to 8 fixtures; at 240V, up to 16. Use only IEC power cables.
How do I clean the lens safely?
Use a soft cloth with mild glass cleaner. Avoid abrasive materials. Ensure the fixture is cool and unplugged.
Why is the fan loud or not spinning?
Check for obstructions. If the fan fails, replace it immediately to prevent overheating. Use only Elation approved parts.
Does the Limelight Par S support RDM?
Yes, it is RDM compatible for remote addressing and monitoring.
What is the recommended distance for optimal beam output?
For best effects, place the fixture 3-10 feet from the target. The 25° beam is suitable for stage washes.
Can I use this fixture outdoors?
No, it is IP20 rated for indoor use only. Protect it from moisture and dust.
How to replace the LED module?
Disconnect power, remove the top cover, unplug the LED board, and replace with a new module. Torque screws to spec.
What does the display show when in DMX mode?
It shows the current DMX address and a signal indicator. If no DMX signal, the display will flash 'NO DMX'.
User questions about Limelight Par S Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Limelight Par S - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Limelight Par S by Elation.
