BCS250 - Loudspeaker Bluesound - Free user manual and instructions

Product Type	Passive Ceiling Speaker
Brand	Bluesound
Model	BCS250
Compatible Amplifier	Bluesound Professional B170S
Impedance	8 ohms (Low Impedance) or 70V/100V (Constant Voltage)
Power Taps (70V/100V)	6W, 7.5W, 15W, 30W
Power Handling (8 ohms)	30W RMS (estimated)
Cut-out Diameter	6 inches (152 mm)
Mounting Type	In-ceiling with dogleg clamps
Connector Type	Phoenix speaker connection block
Wiring Gauge	14-18 AWG
Grille Included	BCS round grille (white)
Optional Grilles	Round black, square white and black (sold separately)
Dimensions (Overall)	Approx. 7.5 in diameter x 4.5 in depth (estimated)
Weight	Approx. 2.5 lbs (1.1 kg)
Color	White (grille), black baffle (assumed)
Material	Engineered plastic / metal doglegs
Installation Tools Required	Screwdriver for dogleg screws, wire stripper
Maintenance	Clean with a dry, soft cloth
Warranty	Refer to Bluesound warranty terms

Frequently Asked Questions - BCS250 Bluesound

What type of speaker is the Bluesound BCS250?

The Bluesound BCS250 is a passive ceiling speaker designed for use with the Bluesound Professional B170S amplifier or other compatible amplifiers.

What are the power tap settings for constant voltage operation?

The BCS250 has a tap selector switch with positions: 6W, 7.5W, 15W, 30W for 70V/100V systems, plus an 8-ohm low impedance setting.

What size cut-out is required for installation?

You need to cut a 6-inch (152 mm) diameter hole in the ceiling for mounting the speaker.

How do I connect the speaker wires?

Use the included Phoenix connector to connect wires of 14-18 AWG. Follow the polarity markings and match the amplifier’s speaker out setting.

How do I secure the speaker in the ceiling?

Loosen the four dogleg clamps by turning counterclockwise, position the speaker in the hole, then tighten each dogleg clockwise to clamp the ceiling.

Can I use a different grille?

Yes, optional grilles are available separately: round black, square white, and square black. The speaker includes a round white grille.

What amplifier is compatible with the BCS250?

The Bluesound Professional B170S is specifically mentioned as compatible. Any amplifier with suitable power and impedance (8 ohms or 70V/100V) may be used.

Can I use the BCS250 in a low-impedance system?

Yes, set the tap selector to the 8-ohm position for direct connection to a standard amplifier.

What is the recommended wiring gauge?

Use 14-18 AWG speaker wire for proper performance.

How should I clean the speaker?

Clean the grille and speaker with a dry, soft cloth. Do not use water or cleaning solvents.

USER MANUAL BCS250 Bluesound

Passive Ceiling Speaker

Owner's Manual

Technical line drawing of a mechanical component with internal gears and mounting holes (no text or symbols)

WHAT'S IN THE BOX

Packed with your BCS250 you will find

• BCS250 speaker
• BCS round grille
  • Phoenix Speaker connection block
• Hook screw
• Quick Setup Guide

SAVE THE PACKAGING

Please save the box and all of the packaging in which your BCS250 arrived. Should you move or otherwise need to transport your BCS250, this is by far the safest container to do so. We've seen too many otherwise perfect components damaged in transit for lack of a proper shipping carton, so please: Save that box!

IDENTIFICATION OF PARTS

INSTALLATION GUIDELINES

1 Connect Phoenix Speaker connection block

IMPORTANT NOTES

• Compatible Bluesound Professional product is the B170S.
• Use Wiring gauge: 14-18 AWG.
- Follow speaker wire connections with respect to B170S Speaker Out setting.

B170S Speaker Out setting to 4Ω/8Ω, 70V

B170S Speaker Out setting to 100V

2 Position BCS250 in-ceiling
a

b

Line drawing of a car wheel with a dome structure and a small vehicle (no text or symbols)

3 Loosen dogleg to unlock
a

b

4 Tighten dogleg. Be sure not to tighten too fast or too tight.

a

b

Line drawing of a car interior with a magnified circular detail showing a vehicle and road (no text or symbols)

5 Repeat Step 3 and 4 for the three other doglegs.
6 Adjust Tap Selector switch to desired setting

Technical line drawing of a mechanical assembly with concentric circular components and a wrench (no text or symbols)

C

Technical line drawing of a mechanical device with a magnified circular detail (no text or symbols)

Tap Selector Switch

Low Impedance setting

- Rotating Tap Selector switch will change settings for Constant Voltage taps.

7 Instell supplied grille

Grill Options

• BCS Round Grille White (supplied)
• BCS Round Grille Black (sold separately)
• BCS Square Grille White (sold separately)
• BCS Square Grille Black (sold separately)

Technical diagram of a mechanical component with two directional arrows indicating movement or force (no text or symbols present)