IPC3238SB-ADZK-I0 - Camera UniView - Free user manual and instructions
Find the device manual for free IPC3238SB-ADZK-I0 UniView in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Camera |
| Model | IPC3238SB-ADZK-I0 |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 3 Megapixels (2048 x 1536) |
| Lens | 2.8mm fixed lens |
| Night Vision | Up to 30m with IR LEDs |
| Power Supply | DC 12V or PoE (IEEE 802.3af) |
| Power Consumption | Max 7W |
| Dimensions | Φ 70mm x 160mm |
| Weight | 0.5 kg |
| Protection Rating | IP67 |
| Operating Temperature | -30°C to 60°C |
| Storage | microSD slot up to 256GB |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Smart Features | Motion detection, tampering alarm |
| Network Interface | 1x RJ45 10/100Mbps Ethernet |
| Audio | Built-in microphone |
| Certifications | CE, FCC, RoHS |
| Included Accessories | Mounting bracket, screws, quick guide |
| Warranty | 3 years |
| Cleaning & Maintenance | Clean lens with soft cloth; avoid direct water spray. |
| Repairability | Not user-serviceable; contact UniView support for repairs. |
Frequently Asked Questions - IPC3238SB-ADZK-I0 UniView
How do I install the IPC3238SB-ADZK-I0 camera?
Mount the camera using the included bracket. Connect to a PoE switch or use a DC 12V power adapter. Run Ethernet cable to your network. Adjust the lens to the desired angle.
What is the default IP address of the camera?
The default IP is 192.168.1.10. Use the UniView Tool or a web browser to access the camera. Ensure your PC is on the same subnet.
How do I reset the camera to factory settings?
Press and hold the reset button (located near the Ethernet port) for 10 seconds using a paperclip. The camera will reboot with default settings.
How do I update the firmware?
Download the latest firmware from the UniView website. Access the camera web interface, go to System -> Maintenance -> Firmware Upgrade, select the file and click Upgrade. Do not power off during update.
Why is the night vision not working?
Check if the IR LEDs are enabled in the camera settings. Ensure there is no obstacle covering the IR LEDs. Also verify that the camera is not in day mode due to ambient light.
How do I configure motion detection?
Log into the camera web interface, go to Events -> Motion Detection. Enable it, draw motion areas on the image, set sensitivity, and configure actions like email alerts or recording.
Can I use an SD card for recording?
Yes, insert a microSD card (up to 256GB) into the slot. Then configure storage in the camera settings under Storage -> SD Card. Format the card first if new.
Is the camera compatible with third-party NVRs?
Yes, it supports ONVIF Profile S/T, so it works with most ONVIF-compatible NVRs. You may need to configure the camera IP and ONVIF port (default 8899).
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or lens cleaning solution. Gently wipe the lens in a circular motion. Do not use abrasive materials.
What is the warranty period?
UniView offers a 3-year limited warranty for the IPC3238SB-ADZK-I0. Keep the original purchase receipt for warranty claims.
User questions about IPC3238SB-ADZK-I0 UniView
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual IPC3238SB-ADZK-I0 - UniView and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPC3238SB-ADZK-I0 by UniView.