S-62 - Pregnant RetroSound - Free user manual and instructions
Find the device manual for free S-62 RetroSound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Coaxial Speaker |
| Brand | RetroSound |
| Model | S-62 |
| Speaker Size | 6.5 inches (165 mm) |
| Impedance | 4 ohms |
| Power Handling (RMS) | 50 Watts |
| Power Handling (Peak) | 150 Watts |
| Frequency Response | 60 Hz - 20 kHz |
| Sensitivity | 90 dB (1W/1m) |
| Mounting Depth | 2.5 inches (64 mm) |
| Cone Material | Polypropylene with treated cloth surround |
| Tweeter | 0.75 inch (19 mm) silk dome |
| Grille Included | Yes |
| Compatibility | Most classic cars with 6.5 inch speaker openings |
| Installation | Surface mount or flush mount with included hardware |
| Operating Voltage | 12V (standard car electrical system) |
| Cleaning Instructions | Wipe with a dry or slightly damp cloth; avoid solvents |
| Safety Warning | Disconnect battery before installation; ensure secure mounting |
| Spare Parts Availability | Contact RetroSound or authorized dealers for replacement parts |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - S-62 RetroSound
What is the size of the RetroSound S-62 speaker?
The S-62 is a 6.5-inch coaxial speaker, designed to fit most standard 6.5-inch speaker openings in classic cars.
Is the S-62 speaker compatible with my classic car?
It is compatible with most classic cars that have a 6.5-inch speaker cutout. Check your mounting depth (2.5 inches) and ensure no interference.
What is the power handling of the S-62?
The speaker handles 50 watts RMS and 150 watts peak. It works well with head units or amplifiers delivering 15-50 watts RMS per channel.
Does the S-62 come with a grille?
Yes, the speaker includes a grille that can be painted to match your interior.
Can I install the S-62 in a motorcycle or boat?
It is designed for indoor automotive use. Not recommended for marine environments unless protected from direct water exposure.
How do I clean the S-62 speakers?
Use a soft dry cloth to dust off. For stubborn dirt, slightly dampen the cloth with water. Do not use chemical cleaners.
What is the impedance of the S-62?
The impedance is 4 ohms, which is standard for most car audio systems.
Does the S-62 require a separate amplifier?
Not necessarily. It can run on a head unit's built-in amplifier (typically 15-25 watts RMS). For louder volume, use an external amp.
Where can I find replacement parts for the S-62?
Contact RetroSound customer support or visit their website for spare parts like grilles or mounting hardware.
Is there a warranty on the RetroSound S-62?
Yes, it comes with a 1-year limited warranty against defects in materials and workmanship.
User questions about S-62 RetroSound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual S-62 - RetroSound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S-62 by RetroSound.