RetroSound

New York - Car stereo RetroSound - Free user manual and instructions

Find the device manual for free New York RetroSound in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice RetroSound New York - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Car Stereo / Receiver
Model New York
Brand RetroSound
Form Factor Single-DIN (approx. 178 x 50 mm)
Weight Approx. 1.5 kg (3.3 lbs)
Power Supply 12V DC (negative ground)
Maximum Power Output 4 x 50 Watts (peak)
Audio Features AM/FM tuner, Bluetooth for hands-free calling and music streaming, USB and AUX inputs, CD player (optional)
Display Retro-styled LCD with white or amber illumination
Controls Rotary knobs and push buttons
Equalizer Built-in 7-band graphic equalizer
Connectivity Bluetooth 4.0, USB (front), 3.5mm AUX input
Recommended Use Classic cars requiring a vintage look with modern functionality
Installation Universal single-DIN fit; includes mounting hardware
Maintenance Clean with a soft, dry cloth; avoid using liquid cleaners
Safety Designed for 12V negative ground systems only; consult vehicle manual
Spare Parts & Reparability Contact RetroSound for replacement knobs, mounting sleeves, or internal components
General Information RetroSound New York combines classic aesthetic with modern audio features. Suitable for 6V/12V vehicles with proper converter.

Frequently Asked Questions - New York RetroSound

How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone, then press the 'BT' button on the stereo. Select 'RetroSound New York' from the list. If prompted, enter PIN 0000.
Can I use this stereo in a 6V vehicle?
The RetroSound New York is designed for 12V negative ground systems. For 6V vehicles, you will need a voltage converter (sold separately).
How do I adjust the equalizer?
Press the 'EQ' button repeatedly to cycle through presets, or use the rotary knob to manually adjust the 7-band equalizer. Refer to the manual for frequency bands.
What are the dimensions of the stereo?
It is a standard single-DIN size: approximately 178 mm (7 inches) wide, 50 mm (2 inches) tall, and 150 mm (6 inches) deep.
Does it have a CD player?
The New York model is available with or without a CD player. Check your specific unit. If it has a CD slot, it supports standard audio CDs.
How do I reset the stereo?
Press the 'Reset' button located behind the faceplate using a pointed object (like a pen). This restores factory settings.
Can I connect an external amplifier?
Yes, the stereo has preamp outputs (RCA) for connecting external amplifiers. Check the manual for output voltage and wiring.
Why is my radio reception poor?
Ensure the antenna cable is properly connected. In weak signal areas, try the 'LOC' (local) setting to reduce sensitivity. A powered antenna may help.
How do I change the display illumination color?
Press and hold the 'DISP' button for 3 seconds to cycle through available colors (e.g., white, amber, green). Not all units may have this feature.
What should I do if the stereo turns off randomly?
Check the vehicle's electrical system. Ensure the stereo's power wire (yellow) has a constant 12V and the ignition wire (red) is connected to a switched source. A blown fuse could also be the cause.

User questions about New York RetroSound

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car stereo in PDF format for free! Find your manual New York - RetroSound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. New York by RetroSound.

USER MANUAL New York RetroSound

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : RetroSound

Model : New York

Category : Car stereo