DW615FS - Dishwasher KKT Kolbe - Free user manual and instructions

Product Type	Freestanding Dishwasher
Brand	KKT Kolbe
Model	DW615FS
Energy Class	D
Number of Place Settings	12
Noise Level	44 dB(A)
Water Consumption per Cycle	9.5 L
Annual Energy Consumption	260 kWh
Dimensions (H x W x D)	845 x 598 x 600 mm
Weight	45 kg
Power Supply	220-240 V / 50 Hz / 10 A
Number of Programs	6
Programs	Eco, Auto, Intensive, Quick, Glass, Pre-rinse
Drying System	Passive condensation drying
Water Connection	Cold water only
Salt and Rinse Aid Indicator	Yes
Delay Start	Up to 24 hours
Child Lock	Yes
Overflow Protection	AquaStop
Filter System	Self-cleaning filter with micro-filter
Interior Material	Stainless steel
Adjustable Racks	Height-adjustable upper basket
Maintenance	Clean filters every month, use dishwasher salt and rinse aid
Spare Parts Available	Filters, spray arms, cutlery basket, salt cap, inlet hose
Manual Language	English, German (others available on request)

Frequently Asked Questions - DW615FS KKT Kolbe

How do I install the dishwasher?

Ensure the appliance is placed on a stable, level surface. Connect the water inlet hose to a cold water supply (max 60°C) and the drain hose to a sink drain. Plug into a grounded outlet (220-240V). Level the feet to avoid tipping.

What type of detergent should I use?

Use a dishwasher detergent (powder, gel, or tablets) suitable for automatic dishwashers. For best results, use a product with rinse aid built-in or add liquid rinse aid to the dispenser.

How do I add salt and rinse aid?

Open the salt container on the bottom of the dishwasher and fill with dishwasher salt. For rinse aid, open the rinse aid dispenser on the door and pour until the indicator is full. Adjust settings as needed.

Why is the dishwasher not cleaning properly?

Check that the spray arms are not blocked, filters are clean, and you are using enough detergent. Also ensure the water temperature is correct and the load is not blocking the spray arms.

What does the E2 error code mean?

Error E2 indicates a drainage issue. Check the drain hose for kinks or blockages, and clean the filter and sump area. Restart the dishwasher after resolving the issue.

How often should I clean the filters?

Clean the filters every 1-2 months or when the dishwasher displays a filter cleaning reminder. Remove the bottom rack, unscrew the filter assembly, rinse under running water, and reassemble.

Can I open the dishwasher during a cycle?

Yes, you can open the door; the cycle will pause automatically. Close the door and press Start/Resume to continue. Be careful of hot steam when opening.

How do I activate the child lock?

Press and hold the Child Lock button (or a combination of buttons indicated in the manual) for 3 seconds until the indicator lights up. Repeat to deactivate.

What is the energy consumption of the Eco program?

The Eco program consumes approximately 0.85 kWh and 9.5 liters of water per cycle. It runs longer but is the most energy-efficient program for normally soiled dishes.

Where can I find spare parts for my DW615FS?

Spare parts such as filters, spray arms, and salt caps are available from authorized KKT Kolbe service centers or online retailers. Use the model number DW615FS when ordering.

USER MANUAL DW615FS KKT Kolbe

User's manual → English language

Modell: DW615FS

Simple diagram of a cabinet or storage unit with no text, numbers, or symbols

Technical line drawing of a mechanical component with grid-like internal structure (no text or symbols)

Technical line drawing of a mechanical cage or rack structure (no text or symbols)

Line drawing of a multi-tiered basket structure with no text or symbols

8.1 8.2

Simple line drawing of a baby with a crossed-out bottle and no text or symbols

Pure diagram of vertical rectangular panels arranged in a grid pattern (no text or symbols)

Line drawing of a wire mesh basket structure (no text or symbols)

Technical line drawing of a wire mesh basket with internal structure (no text or symbols)

1.2

Technical line drawing of a mechanical assembly with rollers and housing (no text or symbols)

Diagram showing two stages of a mechanical or structural assembly with rotational arrows indicating motion (no text or symbols present)

Two identical mechanical components with grid patterns, one being rotated to the other (no text or symbols visible)

Two views of a mechanical component before and after modification, showing internal grid structure (no text or symbols)

Diagram showing structural change from a grid-patterned frame to a rectangular plate (no text or symbols)

Illustration of two hands pressing a button with icons, no text or symbols present

Extra - Spülen

Technical line drawing of a mechanical assembly with internal components and directional arrows (no text or symbols)

Illustration of two hands holding a transparent tray with a circular component and directional arrows indicating movement (no text or symbols)

Illustration of a hand using a tool to clean or spray liquid from a sink (no text or symbols present)

Diagram of a mechanical assembly with a magnified inset showing a component detail (no text or symbols)

Mechanical assembly diagram showing a motor and gear system with no visible text or symbols

Illustration of a hand using a propeller to lift a small mechanical component (no text or symbols visible)

Illustration of a hand using a tool to clean or wash a kitchen sink (no text or symbols present)

Line drawing of a faucet with handle and valve (no text or symbols)

Line drawing of a kitchen sink with a gridded wall and side table (no text or symbols)

Technical line drawing of a multi-chamber refrigerator with open lid and side panel (no text or symbols)

Diagram showing a hand pressing down on a mechanical component with an inset circular view highlighting the motion (no text or symbols)

7. Technische Daten

nach EN-Norm

Blank white image with a black rectangular top and two horizontal gray bars below, no text or symbols present.

Thank you for your confidence and congratulations on the purchase of your new dishwasher!

Read this manual carefully and thoroughly before unpacking the appliance.

It contains important information about safe installation, maintenance and use, as well as important warnings about the use of your appliance.

Mark the passages that are important to you, keep the manual so that you can refer to it at any time and also pass it on to other users, as well as the installer of the appli- ance.

In view of the continuous development, we reserve the right to make any necessary modifications to the appliance and / or the manual in order to better meet the requirements of user-friendliness, user protection and current technical standards.

You can find the latest version of your user manual as well as further data, documents and information on the corresponding product page or in the "Questions & Answers" section of our online shop at www.kolbe.de.

You have chosen a good appliance that will serve you for many years with proper operation and care.

Should you have any complaints despite our thorough quality control, please contact our in-house customer service.

They will be happy to help you.

To ensure a smooth process in the event of any queries, we recommend that you note the respective 20-digit serial number of your appliance in the corresponding field below.

This can be found on the rating label of your appliance or on its packaging.

Your KKT KOLBE - Team

Serial number of my appliance:

KKT KOLBE

User's manual

Dishwasher, model: DW615FS

Version 1.0

KKT KOLBE is a registered trademark.

Table of Content

Important Safety Instructions .... 4

Further Notes and Symbols 13

1. Product Overview ...... 18

1.1 Appliance components and accessories
1.2 Appliance specifications
1.3 Control panel and display

2. Before Operation 22

2.1 Unpacking and preparing the appliance
2.2 Notes on commissioning
2.3 Setting the water softener and salt filling
2.4 Filling and adjusting the rinse aid dispenser
2.5 Filling the detergent dispenser
2.6 Loading dishes

3. Operation, Setting and Use .... 36

3.1 Washing programme overview
3.2 Washing procedure
3.3 Additional functions
3.4 After completion of the wash cycle

4. Cleaning and Maintenance 43

4.1 Cleaning the dishwasher
4.2 Cleaning the filter system
4.3 Cleaning the spray arms
4.4 Caring for the dishwasher

5. Troubleshooting 48

5.1 Problems, possible causes and what to do
5.2 Error codes and meaning

6. Installation of the Appliance 53

6.1 Important notes and installation requirements
6.2 Water connection
6.3 Connection to the power supply
6.4 Positioning of the appliance
6.5 Levelling and height adjustment / adjustment of the levelling feet

7. Technical Data 61

KKT Kolbe Support and Service 63

Important Safety Instructions

This manual is the basis for the safe use of your appliance.

Read and follow the instructions carefully before installing and operating it!

The manufacturer is not responsible for any damage or problems caused by failure to follow the instructions, incorrect installation or improper handling.

Intended use

WARNING!

Dangers to life and limb and risks of damage!

This appliance may present a potential hazard to persons and the environment due to lack of prerequisites or knowledge for its handling!

To avoid this, observe the following instructions!

• Keep children under 8 years and pets at a safe distance from the appliance!

• Do not allow children to play with the appliance or its components!

• Children aged from 8 years and above or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge must not use, clean or generally maintain this appliance unless they are supervised or have been given instruction concerning use of the appliance in a safe way by a person responsible for their safety and understand the hazards involved!

• This appliance is designed for indoor domestic use and is intended for cleaning crockery. Only use it for its intended purpose!
• The appliance is intended for use up to a maximum altitude of 2000 metres above sea level.
• The appliance is not intended for operation via a separate remote control or an external timer.
• Unused electrical equipment can be a safety hazard! Do not leave the appliance switched on unused and disconnect it from the power supply if you are not going to use it for a long period of time!

General warnings

WARNING!

Danger to life and injury!

- If there are pipes in your hot water system that have not been used for more than 2 weeks, flush them by letting the water flow from each tap for a few minutes! Under certain circumstances, hydrogen gas may have built up in them, which is released as a result.

Hydrogen gas is explosive and flammable!

Do not smoke and do not use fire, until the room has been well ventilated!

- Keep all packaging materials, assembly accessories and small parts out of reach of children and pets! These can be very dangerous if, for example, they are pulled over the head or swallowed!

- This appliance must be installed and commissioned in com pliance with all applicable regulations and standards, as well as the relevant instructions in this manual!

To do this, the appliance must be disconnected from the power supply!

If you are unsure, contact a suitably qualified specialist!

- Using defective or damaged equipment can be very dangerous! Before use, make sure that the product and its components including water hoses and cables are in complete and perfect condition!

In the event of malfunction or damage, do not use the appliance, immediately disconnect it from the power supply and contact customer service or appropriately qualified personnel!

- Repairs, modifications or maintenance on the appliance by unqualified persons are dangerous and can cause considerable damage!

These may only be carried out by a suitably qualified specialist in compliance with all applicable safety regulations, including the instructions in this manual and the appliance must be disconnected from the power supply for this purpose!

Never attempt to make changes to appliance components, cables or plugs by yourself and do not disassemble any parts of the appliance if this is not expressly instructed in this manual!

- Edges and components of the appliance can be sharp-edged and cause injuries!

Exercise appropriate caution during any handling and protect yourself if necessary, e.g. with work gloves!

- Check the inside of the appliance before starting a wash cycle to rule out the possibility of children or animals getting into the appliance if the door has been left open!

- Some dishwashing detergents are highly alkaline and can be very dangerous if swallowed!

Also avoid skin and eye contact with detergents and rinse water and keep children away from the dishwasher when the door is open!

Remove any detergent and rinse water residues from the appliance after use!

Keep all detergents in a safe place and out of the reach of children and pets!

- Position knives and other sharp or pointed utensils with the sharp or pointed side facing downwards to avoid injury!

- Do not leave the appliance door fully open, except when loading and unloading the dishwasher, to avoid the risk of accidents and damage!

- Immediately after the end of a wash cycle, the dishes may be very hot!

Allow it to cool down before removing it, to avoid burning yourself!

WARNING!

Risk of electric shock / Dangers from electricity!

• To avoid electric shock and damage, disconnect the appliance from the power supply during installation, maintenance, cleaning or other work on it!
• Before use, check whether the technical data on the appliance's rating plate (especially voltage in V and frequency in Hz) are compatible with the local conditions!
  If this is not the case, return the appliance to the point of sale!
  If anything is unclear, contact your electricity supplier!

- The appliance is fitted with a grounding conductor plug and must be connected to a grounded outlet installed in accordance with all applicable regulations! If you are unsure, consult a suitably qualified specialist!

- Modifications to the power supply system or the replacement of a defective cable may only be carried out by a certified electrician!

There is a risk of life-threatening electric shock for unqualified persons!

- Do not use multiple sockets or extension cables to connect the appliance!

These do not provide the necessary safety!

- To avoid damage to the power cable and associated hazards, make sure that it is not bent or crushed and cannot come into contact with hot surfaces, sharp edges or similar!

Do not pull the plug out of the socket by the cable, but grasp it directly!

- Contact of liquids or moisture with live parts may cause a short circuit or electric shock!

Always keep the outside of the appliance and the cable dry!

Do not use pressure washers or steam cleaners to clean the appliance!

• To avoid possible electric shock due to creeping current, do not operate the appliance with wet or damp hands and wear footwear during operation!

WARNING!

Causes for damage and functional impairments with possible consequential dangers to life and limb!

• To prevent instability and damage, follow the relevant instructions in this manual carefully during installation and only operate the appliance after all components are properly attached!
• Ensure that the surfaces surrounding the appliance (including the underside of the worktop, if applicable) are adequately protected against moisture, to prevent damage, e.g. from steam!
• Only connect the appliance to the main water valve with new hose sets! Do not reuse old sets!
• The appliance is designed for normal household washing loads.
  Follow the instructions in the relevant sections to avoid overloading!
• Only use detergent, rinse aid and salt intended for dishwashers and follow the manufacturer's dosage recommendations!
  Do not use soap, hand dishwashing liquid or washing powder!
• Place sharp-edged or pointed objects in such a way that they cannot damage the door seal!

- Only wash crockery labelled as dishwasher-safe in the appliance or follow the manufacturer's recommendations!

- Do not wash any items in this appliance that have come into contact with corrosive, acidic or alkaline chemicals, paint, petrol, iron or steel deposits!

- If crockery breaks, do not use the appliance until all shards have been removed!

- During operation, only open the appliance door carefully at the start of a washing programme! Otherwise hot water and detergent could escape!

- Never stand or sit on the open appliance door or the crockery basket and do not place heavy objects on them!

This can cause damage and unbalance the appliance!

• Always keep the appliance in a clean condition and clean all components at the recommended intervals to avoid functional impairment and damage! Do not use any aggressive or abrasive cleaning agents to avoid damaging the surfaces and observe the notes and instructions in the relevant section of this manual for cleaning and care!

Further Notes and Symbols

In this manual

Symbols for hazards and information

Warning of danger to persons and of damage

Read the safety instructions marked with this symbol particularly carefully and act in accordance with the instructions in order to avoid danger!

Also pass on these instructions to other users and the installer!

Danger grading by combined signal words:

WARNING!

Indication of a hazardous situation which, if not avoided, may result in death or serious injury

CAUTION!

Indication of a hazardous situation which, if not avoided, may result in minor or moderate injury

ATTENTION!

Indication of a situation which, if not avoided, may result in damage to the product or on objects in its surroundings

Information and tips

Following the instructions marked with this symbol will provide you with useful information, make the respective procedure easier and may save you some problems.

Note on illustrations

The figures in this manual are for illustrative purposes and may occasionally differ slightly from the appearance.

Appliance, components and accessories

Symbols on appliance parts, accessories, etc.

The following symbols attached to the appliance, its components and accessories (if applicable) indicate important information for the safe operation of the appliance. Do not remove or damage them, always ensure good visibility and replace damaged symbols!

General danger warning!

There is a potential hazard!

Behave with appropriate caution.

Warning of electrical voltage!

Some components of the product are live during and also after operation!

Take care not to come into contact with them and take appropriate protective measures if necessary.

Warning of flammable substances!

Contained or emerging substances, liquids or gases easily self-ignite!

Avoid contact with ignition sources or sources of danger, e.g. also water or air!

Warning of hot surface!

The product may become hot during operation and cause injury and damage.

Do not touch it until it has cooled down and keep the clearances around the appliance recommended in this manual.

Follow these instructions for use

Read this manual carefully, before using the product and pass on the relevant information to other users and the installer.

EU conformity

The product complies with the applicable EU requirements regarding safety, environmental protection and health protection.

Disposal and environmental protection

Symbols for disposal

No disposal in household waste (WEEE marking)

Do not dispose of the product as unsorted waste! Take it to a collection point for the recycling of electrical and electronic equipment for reuse and recovery. To do this, have a qualified electrician remove the cable and make the door closing device unusable.

Recyclable material (Möbius strip)

Separate the relevant components of the product by type from the residual waste and dispose of them in accordance with local regulations.

Recyclable material (Triman symbol)

Separate the product from residual waste for disposal according to the accompanying sorting instructions.

General notes on disposal

- Improper disposal may endanger the environment and human health! By ensuring that the product and its packaging are disposed of properly, you will help to avoid possible hazards. This also applies to the disposal of old appliances, if applicable.

- The packaging materials used have been carefully selected and should be recycled to reduce raw material consumption and waste. Separate their components by type and dispose of them accordingly.

- For information on current disposal methods and recycling, contact your local authorities, your waste disposal company or the vendor.

Notes on water and energy saving

• Always bear in mind that washing dishes in the dishwasher following this manual will mostly use less energy and water than washing them by hand.
• If possible, use the ECO programme. This is particularly energy-efficient and environmentally friendly.
• Only use the intensive programme when actually required.
• To reduce the environmental impact of wastewater, pay attention to the composition of your cleaning products. For example, those labelled „Bio“ or „Eco“ are usually more environmentally friendly because they contain no or only small amounts of environmentally harmful active ingredients.

The cleaning effect may be limited as a result.

- To avoid unnecessarily high water and energy consumption, do not pre-wash the dishes manually.

This is normally not necessary and is not recommended.

- Note that water and energy can be saved by respecting the maximum loading capacity indicated in this manual. Also follow the further instructions for loading the dishwasher in the corresponding sections.

- Clean the filters at the recommended intervals, to prevent impurities from becoming trapped and thus increasing energy consumption.

- To save energy in stand-by mode, the appliance switches off automatically after 15 minutes of inactivity.

Notes on transporting the appliance

If you need to transport the appliance after unpacking / at a later time, observe the following instructions to avoid damage:

• As the appliance is heavy, do not move it alone, but with at least one additional person.
• Keep the original packaging of the product and always transport the appliance packed in it in the same way as when it was delivered. Observe the markings on it!
• If the original packaging is not present, use one similar to this one. Secure all loose / detachable parts so that they cannot touch each other.
• Ensure that the appliance is in a vertical position during transport and when setting it down. If absolutely necessary, it can be tilted onto its back.
• Avoid any impact on the product and its components and take appropriate protective measures if necessary.

Storage instructions

If you need to store the product for a certain period of time, observe the following instructions to avoid damage:

• Pack the appliance together with desiccant bags if possible in the original carton or similar packaging and seal it with adhesive tape.
• Choose a dry and clean storage place.
• Make sure to keep it in an horizontal position.
• Do not load the packaging.
• Only store the appliance for as long as absolutely necessary.
• Do not store the product near chemically aggressive or corrosive substances to avoid possible corrosion.
• Check the appliance regularly for visible damage during the storage period and replace the packaging if necessary.

1. Product Overview

1.1 Appliance components and accessories

1 Top spray element
2 Inner pipe
3 Lower spray arm
4 Salt container
5 Detergent and rinse aid dispenser
6 Filter assembly
7 Cutlery tray
8 Upper crockery basket
8.1 Upper spray arm
8.2 Cup rack
9 Lower crockery basket

789

Technical line drawing of a mechanical tray or rack with internal grid structure (no text or symbols)

Technical line drawing of a multi-layered mechanical or electrical component (no text or symbols)

Line drawing of a multi-tiered rectangular metal tray or basket structure (no text or symbols)

8.1 8.2

1.2 Appliance specifications

Product dimensions

Width (W) 59.8 cm

Depth (D1) 60 cm

Depth (D2)

incl. open door

Plinth recess (P) 4.8 cm

Height (H) 84.5 cm

Height of plinth panel 12.5 cm

Length of power cable 150 cm

Length of waste water hose 138 cm

Length of fresh water hose 150 cm

Features and further properties

• Control panel with LED display

• 7 washing programmes:

• Auto
• Intensive
• Universal
  • ECO
• 90 Minutes
• Glass
• Rapid

- 5 selectable additional functions:

• Start time delay
• Auto door opening
• Selection of washing area
• Extra cleaning

• Extra drying

• Loading capacity: 14 crockery sets
  • Safety hose with aquastop

• Pre-assembled cover plate for free-standing installation

For further properties see "Technical Data"

1.3 Control panel and display

The following overview is a brief description

of the button functions and display.

For detailed operating instructions, see the relevant sections.

Control buttons
1 On / Off Switching the appliance on/off by pressing the button

2	Programme selection	Selecting the washing programme by pressing the button repeatedly if necessary
		Adjusting the dosage settings after pressing and holding button
3	Function selection	Selecting an additional function by pressing the button repeatedly if necessary
4	Selecting the washing area	Limitation of washing operation to upper (top spray element + upper spray arm) or lower area (lower spray arm) by pressing the button repeatedly if necessary
5 Start time delay		Postponing the start time of the selected programme by one hour each time the button is pressed
		Activating the rinse aid dosage settings by pressing the button (after pressing and holding P
6	Auto door opening	De-/activating the automatic door opening after the end of the selected programme (except ▶) by simultaneously pressing the ⚡+ Ⓤ buttons for 3 seconds
7 Start / Pause		Starting / pausing the selected programme by pressing the button.

8 Programme indicator lights

A	Auto
	Intensive
	Universal
ECO	ECO
	Glass
	90 Minutes
▶	Rapid

Indicates the currently selected programme (for programme details, see the following table).

9 Function indicator lights

Functions selectable with the F button

	Extra clean	Indicates function activation for particularly effective washing performance(selectable for ), , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
	Extra drying	Indicates function activation for particularly effective drying performance(selectable for ), , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Washing area
	Upper washing area	Indicates the exclusive operation of the top spray element and upper spray arm.
	Lower washing area	Indicates the exclusive operation of the lower spray arm.

10 LED display

8:88 Digital display		Displays the washing temperature of the selected programme, the set start time delay, error codes, etc.
	Rinse aid	Indicates when rinse aid needs to be filled.
	Salt	Indicates when rinsing salt needs to be filled.
	Water failure	Indicates when the water inlet is switched off / not working.

2. Before Operation

2.1 Unpacking and preparing the appliance

Smell perception during unpacking

A slight odour may be noticeable when unpacking the appliance.

This is normal and harmless and will soon disappear.

- When unpacking the appliance, make sure that it has not been damaged during transport.

WARNING!

Risk of injury and electric shock!

If you notice any damage to the appliance, its cable or other components, do not connect it and do not put it into operation!

This can be very dangerous!

Contact the customer service.

- We recommend writing down the 20-digit serial number on the inner cover of this manual for possible queries.

- If the appliance has been properly installed (see relevant sections), before using it, ensure that all packaging materials, stickers, protective films and transport protection materials have been removed from the product and properly disposed of and that any remaining small parts such as assembly materials are safely maintained.

WARNING!

Danger of suffocation!

Small parts, foils etc. can be very dangerous if they are swallowed or pulled over the head, for example!

Always keep them out of reach of children and pets.

2.2 Notes on commissioning

Operating requirements

Always observe to the following limit values for operation:

• Maximum permissible water pressure / inlet: 1 MPa
• Minimum permissible water pressure / inlet: 0.04 MPa
- Load limit per wash cycle: 14 tableware sets

• Only operate the appliance if it is in perfect condition and has been properly installed, ideally by a suitably qualified specialist.
• Before commissioning, adjust the salt dosage of the water softener according to your water hardness and fill the salt container, fill and adjust the dosage setting of the rinse aid container and fill the detergent dispenser, as described in the following sections.
• To operate, set and use the appliance, proceed as described in the relevant sections.

Smell perception during operation

If your appliance smells slightly of solvent or similar after commissioning, this is normal. With new appliances, plastic and synthetic odours can occur during the first 20 to 30 wash cycles due to heating. However, these odours will gradually dissipate.

2.3 Setting the water softener and salt filling

Function of the water softener

The water softener is designed to remove limescale, minerals and salts from the water using rinsing salt, to ensure optimum washing results and to prevent lime scale residues on dishes, accessories and appliance parts, as well as harmful or adverse effects on the operation of the appliance due to deposits resulting from hard water. The more minerals present, the harder your water will be. This varies from place to place.

For information about the hardness of your water supply, contact your water supplier.

Adjusting the salt dosage of the water softener

Set the water softener manually according to the water hardness in your region, as follows:

- Close the appliance door and switch on the appliance.

- Within 60 seconds after turning on the appliance, press and hold the programme selection button P for more than 5 seconds to enter the water softener setting mode.

- Press the programme selection button Repeatedly until the dosage setting according to your water hardness appears on the display (sequence: H1→H2→H3→H4→H5→H6; see table)

- Press the on/off button Ⓞ to confirm the setting.

Water hardness
°dH (D) °fH (F) °Clarke (GB)			Mmol/l	Dosage setting	Regeneration at every Xth programme cycle *	Salt consumption
0 - 5	0 - 9	0 - 6	0 - 0.94	H1 - 0
6 - 11	10 - 20	7 - 14	1.0 - 2.0	H2	X = 10	9
12 - 17	21 - 30	15 - 21	2.1 - 3.0	H3	X = 5	12
18 - 22	31 - 40	22 - 28	3.1 - 4.0	H4	X = 3	20
23 - 34	41 - 60	29 - 42	4.1 - 6.0	H5	X = 2	30
35 - 55	61 - 98	43 - 69	6.1 - 9.8	H6	X = 1	60

1^ = 1.25^ = 1.78^ = 0.178mmol / l

Factory setting: H3

* Every cycle with a regeneration operation consumes additional 2.0 litres of water, the energy consumption increases by 0.02 kWh and the programme extents by 4 minutes.

Filling the salt container

ATTENTION! Risk of damage!

Only fill the salt container with dishwasher salt (regenerating salt)!

Any type of salt that is not specifically intended for use in dishwashers, especially table salt, will damage the water softener!

If any spilt grains of salt or salt water remain inside the appliance for a long time, this can lead to corrosion and damage the filter system, the pump or other important appliance parts!

To avoid this, only fill the water softener with salt shortly before starting a wash cycle!

Fill the salt container before commissioning or when the salt symbol appears on the display, as follows:

• Remove the lower basket and unscrew the cap of the salt container (1, for the position see section "Appliance components...").
• Place the end of the supplied funnel into the hole and pour in about 1.5kg of dishwasher salt (2).
• Fill the salt container to its maximum limit with water (3, If a small amount of water escapes from the salt container, this is normal and harmless).
• Screw the cap tightly back onto the salt container (4).
• Start any wash cycle immediately after filling the salt into the salt container (We recommend using a short programme), to remove any salt residue remaining in the appliance.

Notes on salt filling and symbol display

The salt container may only be topped up if this is indicated by the salt symbol ☐ on the display.

The symbol disappears from the display, after the salt container has been filled with salt. However, depending on how well the salt dissolves, it may continue to glow for some time after filling.

graph TD
    A["1: Hand holding dollar sign"] --> B["2: Stopping a pot with salt"]
    B --> C["3: Process pouring salt into a pot"]
    C --> D["4: Cover the pot with salt and arrow indicating rotation"]

2.4 Filling and adjusting the rinse aid dispenser

ATTENTION! Risk of damage!

Only use liquid branded rinse aid for dishwashers to fill the rinse aid dispenser! Never fill the rinse aid dispenser with other substances (e.g. dishwashing detergent, liquid washing-up liquid).

Function of the rinse aid

The rinse aid is released during the last rinse to prevent water from forming droplets on your crockery, which can leave stains and streaks. It also improves drying by making the water roll off the crockery.

Filling / refilling the rinse aid container

The intervals at which the rinse aid dispenser must be refilled depend on the number of wash cycles and the dosage setting.

If rinse aid is required, this is indicated by the rinse aid symbol on the display. Then fill the dispenser as follows:

• Open the lid of the rinse aid container by folding it upwards using the handle (1).
• Pour the rinse aid into the dispenser (2). Take care not to overfill it!
• Close the lid again (3).

Setting the rinse aid dosage

- Switch on the appliance.

- Within 60 seconds after switching on, press the programme selection button P for more than 5 seconds and then press the button for the start time delay ⏻ to start the setting mode for the rinse aid dosage. The rinse aid symbol ✦flashes on the display.

- Press the programme selection button Repeatedly until the desired setting is displayed according to your usage habits (sequence: d1 d2 d3 d4 d5 d1 ; the higher the number, the higher the rinse aid dose; standard factory setting: d3).

- Wait 5 seconds or press the on/off button to confirm the setting.

2.5 Filling the detergent dispenser

WARNING!

Risk of poisoning and injury!

Some dishwashing detergents are corrosive! Ingestion can lead to death! Also avoid eye and skin contact and always keep dishwashing liquid away from children and pets!

Chemical components of detergents

The chemical ingredients that make up commercially available dishwashing detergents are necessary to remove and dissolve all soiling and rinse it out of the appliance. Cleaning products labelled as "organic" or "eco" usually only contain small amounts of environmentally harmful active ingredients. The cleaning effect may be limited as a result.

Storage and use of dishwashing detergents

• Only use detergent specifically designed for use in dishwashers.
• Keep detergent powder fresh and dry.
• Only add powder detergent to the dispenser shortly before starting a wash cycle.

Filling / refilling the detergent dispenser

Fill the detergent dispenser before each wash cycle as follows:

• Open the dispenser lid by sliding the release button to the right (1; opening mechanism depending on model, possibly also push button).
• Pour the detergent for the main wash cycle into the detergent compartment of the dispenser (2). The amount depends on the degree of soiling of the crockery and may vary. Follow the manufacturer's recommendations.
• For a better cleaning result, especially with heavy soiling, add a small amount of detergent to the inside of the appliance door for the pre-wash phase.
• Close the flap by pushing it forwards and then pressing it downwards (3).

2.6 Loading dishes

General information and recommendations for cleaning of crockery and utensils in the dishwasher

• When buying crockery and utensils, make sure that they are labelled dishwasher-safe.
• For particular items, select a programme with the lowest possible temperature.
• To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the programme has ended.

Unsuitable for dishwashers

• Cutlery with wooden, horn, china or mother-of-pearl handles
• Plastic items that are not heat resistant
• Older cutlery with glued parts that are not temperature resistant
  • Bonded cutlery items or dishes
• Pewter or cooper items
• Crystal glass
  • Steel items subject to rusting
• Wooden platters or chopping boards
• Items made from synthetic fibres

Suitable for dishwashers

• Some types of glasses can become dull after a large number of wash cycles.
  • Silver and aluminum parts have a tendency to discolour during washing.
• Glazed patterns may fade if machine washed frequently.

Before loading the dishwasher

• Remove coarse food residues from crockery and utensils.
• Soak remnants of burnt food.
• It is not necessary to pre-wash the dishes by hand (see also notes on water and energy saving at the beginning or this manual).

General instructions for inserting crockery and utensils

CAUTION!

Risk of injury and risk of damage!

Sharp and pointed utensils pose a potential risk of injury and cause damage!

Always face sharp and pointed sides downwards and ensure that they cannot touch anything!

Also observe the instructions for inserting cutlery!

ATTENTION!

Risk of damage and malfunction!

Place all crockery and utensils so that the spray arms can rotate freely!

Make sure that the door seal is not touched!

Make sure that glasses do not touch each other!

• Place crockery and utensils so that they are stacked securely and cannot tip over or get moved by the spray of water.
• Point the openings of vessels such as cups, glasses, pots/pans etc. downwards and place curved or recessed objects (e.g. with recessed bottoms) slantly so that the water can run off.
• Do not place dishes and cutlery inside or on top of each other.
• Do not wash very small items in the dishwasher as they could easily fall out of the baskets.
• To optimise the washing result and energy consumption, take care not to overload the dishwasher (Note the maximum loading capacity!) and follow the instructions in the following sections.

Loading the lower crockery basket

Large items of crockery and utensils that are difficult to clean should be placed in the lower basket, e.g. pots, pans, lids, serving bowls and dishes.

Pure diagram of vertical slats arranged in a grid pattern without any text, numbers, or symbols

• Place serving dishes and lids on the sides in order to avoid blocking the rotation of the top spray arm.
• For crockery placed at the front of the basket, in line with the detergent dispenser, observe the recommended maximum diameter of 19 cm so as not to obstruct the automatic opening of the detergent dispenser during operation.

Example of loading the lower basket

(according to EN standard)

1 Glass
2 Oven pot
3 Dessert plates
4 Dinner plates
5 Soup plates
6 Oval platter
7 Melamine dessert plates
8 Melamine bowls
9 Glass bowl
10 Dessert- / Salad bowls

Folding back the rack shelves in the lower basket

• The spikes of the lower basket are used to hold plates and platters (1.1).
  • To create more space for large pieces, fold them over so that they lie flat (1.2).

1.2

Line drawing of a rectangular metal cage or rack structure (no text or symbols)

Technical line drawing of a wire mesh basket with internal structure (no text or symbols)

1.2

Loading the upper crockery basket

The upper basket intended for delicate and light dishware such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and slightly soiled pans.

Technical line drawing of a mechanical component with no visible text or symbols

Example of loading the upper basket

(according to EN standard)

1 Cups
2 Saucers
3 Glasses
4 Mugs
5 Small pot

Height adjustment of the upper basket

To place higher dishes in the upper or lower basket, you can easily adjust the height of the upper basket:

• To raise the upper basket, just grab the basket in the middle of each side and lift it until the basket locks in the upper position. It is not necessary to operate the adjustment handle. (2.1)
• To lower the upper basket, lift the adjustment handles on each side to release the basket and lower it to the lower position. (2.2)

Line drawing of a mechanical assembly with spring-loaded components and a handle, labeled '2.1 2.2' (no text or symbols on the diagram itself)

Technical illustration of a mechanical assembly with a magnified inset showing hand turning a cylindrical component (no text or symbols present)

Adjusting the cup rack on the upper basket

- If you need more space in the upper basket, simply fold the cup rack upwards so that you can lean tall glasses against it (see illustration).

Two technical line drawings of a structural frame with internal supports, showing rotational and curved movement (no text or symbols)

Adjusting the cutlery tray for increased space requirement in the upper basket

To accommodate higher dishes in the upper basket, remove one half of the cutlery tray as follows:

- Raise the right half of the cutlery grid slightly on the left so that it is flat but positioned higher.

Diagram showing a grid structure before and after modification, with no visible text or symbols

- Slide the right-hand half to the left over the left-hand half of the cutlery grid to create a space on the right-hand side.

Diagram showing a grid structure before and after modification, with no visible text or symbols

- Remove the right-hand half of the cutlery grid from the cutlery tray.

Diagram showing structural change of a grid-patterned frame before and after (no text or symbols)

Loading the cutlery tray (according to EN standard)

CAUTION!

Risk of injury and damage!

Sharp or pointed utensils pose a potential risk of injury and damage!

Always position them with the sharp or pointed side facing downwards and do not allow them to protrude through the cutlery tray grid!

• Place the cutlery in the designated places in the cutlery tray.
  • Make sure that they do not nest together, as this can affect the washing result.

Example of loading the cutlery tray

(according to EN standard)

1 Soup spoons
2 Forks
3 Knives
4 Tea spoons
5 Dessert spoons
6 Serving spoons
7 Serving fork
8 Gravy ladle

3. Operation, Setting and Use

3.1 Washing programme overview

Program	Programme information	Cycle description	Detergent Pre/Main	Running time	Energy consumption	Water consumption	Rinse aid needed
[BYTO] Auto	Automatic adjustment of running time, temperature etc. according to the degree of soiling of the rinse water	Pre-wash (45°C)Wash (55-65°C)RinseRinseRinse (50-55°C)Drying	4/18 g (1 or 2 tabs)	85-150 min	0.850 - 1.55 kWh	8.5 - 18.7 l	Yes
[XBS] Intensive	For heaviest soiled crockery, and normally soiled pots, pans, dishes etc. with dried-on food	Pre-wash (50°C)Wash (65°C)RinseRinseRinse (60°C)Drying	4/18 g (1 or 2 tabs)	205 min	1.615 kWh	18.6 l Yes
[XY64] Universal	For normally soiled pots, plates, glasses and lightly soiled pans	Pre-wash (45°C)Wash (55°C)RinseRinse (55°C)Drying	4/18 g (1 or 2 tabs)	175 min	1.230 kWh	14.8 l Yes
ECO	Most efficient for normally soiled tableware in terms of its combined energy and water consumption	Wash (50°C)RinseRinse (45°C)Drying	22 g (1 tab)	220 min	0.747 kWh	9.8 l Yes
[CAIX] Glass	For lightly soiled crockery and glass	Pre-washWash (50°C)Rinse (50°C)Rinse (50°C)Drying	4/18 g (1 or 2 tabs)	120 min	0.995 kWh	14.8 l Yes
[THB] 90 min	For normally soiled dishes that need a quick wash	Wash (60°C)RinseRinse (50°C)Drying	22 g (1 tab)	90 min	1.180 kWh	11.9 l Yes
[DSKH] Rapid	A short programme for lightly soiled dishes that do not need drying	Wash (40°C)Rinse (45°C)	12 g	30 min	0.820 kWh	11.3 l No

Notes on ECO programme and table data

The ECO programme is best suited to cleaning normally soiled dishes and is the most efficient for this purpose in terms of combined energy and water consumption.

It is also used for the test cycle to check compliance with EU Eco design regulations.

The figures for the other programmes are for guidance only.

Further notes on saving energy

Your appliance meets the latest standards and its energy consumption has already been optimised to a large extent.

To minimise the energy and water consumption of the appliance, follow the corresponding recommendations at the beginning of this manual.

To save energy in stand-by mode, the appliance switches off automatically after 15 minutes of inactivity.

3.2 Washing procedure

Programme selection and start of operation

• Draw out the lower and upper basket, load the dishes as described before and push them in again completely. It is recommended to load the lower basket first.
• Fill the detergent dispenser according to your current needs.
• Make sure that the plug is inserted into the socket and the water supply is turned on to full pressure.
• Close the door, press the on/off button ① to switch on the appliance.
• Select the desired washing programme by pressing the programme selection button P repeatedly until the corresponding programme indicator lights up.
• If desired, select one or more additional functions as described in the following sections.
• Press the start/pause button ▶b start operation.

Changing the programme during operation

A programme can only be changed shortly after it has started, as otherwise the detergent may already have been released or the rinsing water may already have been drained. If this is the case, the corresponding programme must be reset and the detergent must be refilled.

To reset and reset the programme setting and set it again, proceed as follows:

- Press the start/pause button ▶ to pause operation.

- Press the programme selection button P for at least 3 seconds. The programme will be cancelled.

- Select the desired washing programme as described before.

- Press the start/pause button ▶II. The wash cycle will start after 10 seconds.

Adding dishes after starting a cycle

CAUTION!

Risk of scalding!

Vapour escaping from the appliance can be very hot and cause scalding!

Only open the door very carefully after starting operation!

Forgotten dishes can be inserted at any time, as long as the detergent dispenser has not yet opened. In this case, proceed as follows:

- Press the start/pause button ▶II to pause the washing process.

- Wait 5 seconds, then open the door carefully.

- Add the forgotten dish(es).

- Close the door.

- Press the start/pause button ▶II. Operation will continue after 10 seconds.

Illustration of a hand pressing a button with a recycling bin, next to bar charts (no text or symbols)

Illustration of a hand pressing a button on a device (no text or symbols present)

3.3 Additional functions

The following functions can be activated individually in addition to the selected programme.

Set them as described in the corresponding section:

Start time delay

Use this function to shift the start time of the selected programme by the specified time (in hours), as follows:

• Select a washing programme as described before.
• Press the button for the start time delay Several times if necessary, to shift the time for the programme start by one hour each time you press the button (max. 24 hours). The currently set start time delay is shown on the digital display.
• Press the start/pause button ▶II.
  • After the set time has elapsed (starting from pressing the start/pause button) operation is started automatically with the selected washing programme.

Selecting the washing area

Use this function to select only the upper washing area (top spray element + upper spray arm) or the lower area (lower spray arm) for washing operation, as follows:

• Select a washing programme as described before.
• Press the button for selecting the washing area repeatedly if necessary to select the upper or lower area for the washing operation. The corresponding function indicator light for the currently selected option lights up.
• Start the operation by pressing the start/pause button ▶.

Extra cleaning

Select this function for particularly effective washing performance, as follows:

- Select one of the following washing programs:

• Press the function selection button. Frepeatedly, until the corresponding function indicator light indicates that the function has been activated.
• Start operation with the start/pause button ▶II.

Extra drying

Select this function for a higher temperature and a particularly effective drying performance, as follows:

- Select one of the following washing programs:

• Press the function selection button. Frepeatedly, until the corresponding function indicator light indicates that the function has been activated.
• Start operation with the start/pause button ▶II.

Auto door opening

If this function is activated, the appliance door opens automatically after the wash cycle is complete (except for the Rapid programme ▶▶ opening angle of the door usually 45-90°).

This allows vapours and any odours to escape and increases the drying effect.

CAUTION!

Risk of injury and damage!

To avoid injury or damage (including to the door closing device), make sure that the door is not blocked during automatic opening, that it cannot hit people or objects and that it does not present an obstacle or accident risk during or after opening!

To deactivate or activate the automatic door opening for the currently selected programme, proceed as follows:

- Select a washing programme as described before (except ▶).

- Press and hold the button for selecting the washing area and the button for the start time delay at the same time for about 3 seconds.

When the symbol for the auto door opening function lights up, this indicates that the function has been activated; when it goes out, it indicates that it has been deactivated.

- Start operation with the start/pause button ▶II.

• After completion of the selected programme and an additional programme-dependent time interval (see table), the appliance door opens automatically, as described before.

Selected programme	Time between end of programme and auto door opening
A	9 min
	11 min
	9 min
ECO	73 min
	10 min
	6 min

3.4 After completion of the wash cycle

CAUTION!

Risk of burns!

The dishes may be very hot immediately after the end of the wash cycle!

Allow it to cool down before emptying it, to avoid burning yourself!

ATTENTION!

Risk of damage!

Hot dishes are sensitive to shock!

To avoid damage, leave it to cool for about 15 minutes before removing it from the appliance!

• If the auto door opening function is not deactivated, the appliance door will open automatically after the selected programme has been completed.
  Follow the instructions in the relevant section!

- To prevent water from dripping from the upper basket into the lower one during removal of dishes, empty the lower basket first and then the upper basket.

4. Cleaning and Maintenance

WARNING!

Risk of electric shock!

To avoid electric shocks and short circuits, disconnect the appliance from the power supply before cleaning and maintenance work!

The ingress of liquids or moisture into live components can cause an electric shock and/or short circuit or damage to the locking device or other components! Do not use too much liquid to clean relevant areas, such as the control panel, do not use high-pressure or steam jet cleaners and do not use spray cleaners!

CAUTION!

Risk of injury!

Internal components can be sharp-edged! Protect yourself accordingly against injuries, e.g. when cleaning the filters!

ATTENTION!

Risk of damage!

Do not use any aggressive or acidic or alcoholic cleaning agents, scouring agents or abrasive, sharp or pointed utensils for cleaning! These can damage or discolour the appliance's surfaces and the control panel! Some types of paper towels can also leave marks! Before use, check the manufacturer's instructions of your cleaning agents and utensils for appropriate suitability! Cleaning residues can damage the appliance's surfaces! Always remove them immediately and completely!

To ensure that your dishwasher retains its appearance, that it remains fully functional and to prevent odours from forming, take good care of the appliance! Always keep all parts of the appliance clean and remove any soiling immediately, as described in the following sections.

4.1 Cleaning the dishwasher

We recommend regular basic cleaning of the appliance as required, but at least every 2 months.

• Use a soft cloth with warm soapy water to clean the outside of the appliance, the control panel and the door area.
  Note: The sides of the appliance door are not reached by the spray arms when washing. Clean them too, with the door open.
• Clean the door seals regularly with a soft, damp cloth or sponge.
• To clean the inside surfaces of the appliance, use a cloth moistened with water and a little vinegar or a cleaning product designed for dishwashers.
• Clean all surfaces until all soiling has been completely removed, remove cleaning residues with a cloth and clear water and then dry with a soft cloth.

4.2 Cleaning the filter system

The filter system in the base of the interior of the appliance retains coarse soiling and foreign objects such as toothpicks or any shards during washing.

These can also clog the filters.

Therefore, check the condition of the filters regularly and clean them if necessary, but at least once a week under running water as described in this chapter.

ATTENTION!

Risk of damage and possible malfunction!

When using the dishwasher without or with improperly inserted filters, coarse dirt particles can enter the system and cause clogging, impair the performance of the appliance and damage dishes and utensils!

Never use the dishwasher without correctly assembled and inserted filters!

Removing the filter module

• Hold the coarse filter and rotate it anticlockwise to unlock the filter assembly.
• Lift the filter assembly upwards and out of the bottom of the dishwasher.
  • Make sure that no foreign bodies can get into the opening!

Disassembling the filter module

• Pull the fine filter off the bottom of the filter assembly.
• Detach the coarse filter from the main filter by gently squeezing the tabs at the top and pulling it out upwards.

1 Coarse filter
2 Main filter
3 Fine filter

• Remove any foreign bodies from the filters and be careful not to injure yourself if shards or other sharp or pointed objects have been collected in it! Clean them of coarse food residues by rinsing them under running water.
• For thorough cleaning, use a soft cleaning brush.

Technical line drawing of a mechanical assembly with internal components and directional arrows (no text or symbols)

Illustration of two hands holding a tray with a circular component and directional arrows indicating movement (no text or symbols)

Illustration of a hand using a spray gun to clean a car (no text or symbols present)

Re-assembling and -inserting the filter module

• Reassemble the filters in the reverse order to that in which they were removed.
• Replace the filter module.
• Rotate the coarse filter clockwise to the close arrow, but do not overtighten it.

4.3 Cleaning the spray arms

Hard water chemicals can clog the nozzles of the spray arms and block the bearings. Therefore, clean the spray arms regularly, at least every 3 months.

Removing the spray arms

• To remove the upper spray arm, hold it at the pivot point in the centre and turn the spray arm counterclockwise.

• To remove the lower spray arm, pull it out upwards.

Cleaning the spray arms

- Wash the spray arms in warm water with a little soap and use a soft brush to clean the nozzles and remove any foreign objects from them.

Reinserting the spray arms

• After thorough cleaning, reinsert both spray arms in the reverse order to the removal procedure.

Diagram of a mechanical assembly with a magnified inset showing a component detail (no text or symbols)

Mechanical assembly diagram showing a gear system with labeled components and directional arrows (no text or symbols present)

Illustration of a hand using a propeller to lift a small mechanical component (no text or symbols visible)

Illustration of a hand using a tool to clean or wash a kitchen sink (no text or symbols present)

4.4 Caring for the dishwasher

After every wash cycle

- After every wash cycle, leave the door slightly open for some time so that moisture and odours are not trapped inside.

Seals

One of the factors that cause odours to form in the dishwasher is food that remains trapped in the seals.

- In particular, clean the seals regularly as described.

Maintenance

During use of the dishwasher, deposits of dirt or limescale may form which can significantly affect the operation of the appliance. To prevent this, observe the following instructions:

• Always ensure that the salt container is sufficiently filled and that the correct dosage setting is used according to your water hardness (see relevant section).
• Clean the appliance components regularly as described before. We recommend additional cleaning of the appliance with a commercial machine cleaner for dishwashers according to the manufacturer's instructions every 1-3 months.

Frost precaution

In winter, if necessary, take frost protection measures on the dishwasher after each wash cycle:

• Cut off the electrical power to the dishwasher at the supply source.
• Turn off the water supply and disconnect the water inlet pipe from the water valve.
• Drain the water from the inlet pipe and water valve (Have an appropriate collection container ready).
• Reconnect the water inlet pipe to the water valve.
• Remove the filter module at the bottom of the tub and use a sponge to soak up water in the sump.

If the appliance is not used for a longer period of time

To maintain the door seals and to prevent odours from forming in the appliance, the following steps are recommended, e.g. before several days of absence:

• Carry out an empty wash cycle.
• Pull the plug out of the socket and switch off the water supply.
• Leave the appliance door slightly open.

Moving the dishwasher

• As the appliance is heavy, do not move it alone, but with at least one additional person.
• Make sure you hold it in a vertical position. If absolutely necessary, it can be tilted onto its back.

5. Troubleshooting

WARNING! Risk of electric shock, injury and damage!

Do not use the appliance in case of damage or defect!

This can be dangerous!

Disconnect it from the power supply immediately.

Repairs and modifications are very dangerous for unqualified persons and can cause damage!

Never carry out repairs or modifications to the appliance yourself and do not disassemble it!

5.1 Problems, possible causes and what to do

The following table may help you to find your own solutions to possible problems with the appliance.

If the suggested solutions mentioned above do not solve a problem, contact the customer service or a suitably qualified specialist!

Problem Possible cause What to do

Dishwasher doesn't start	Fuse blown, or circuit break tripped	Replace fuse or circuit breaker.Remove any other appliances sharing the same circuit with the dishwasher.
	No power supply Make sure the dishwasher is turned on,the power cord is properly plugged into the wall socket and there is no power outage.
	Low water pressure Check that the water supply is connected properly and the water is turned on.
	Door of dishwasher not properly closed	Make sure to close the door properly and latch it.
Water not pumped form dishwasher	Blocked drain hose Check the drain hose for kinks or clamps.
	Filter clogged Check coarse the filter
	Drain pipe blocked Check that the water of the kitchen sink drains well. If this is not the case, contact a certified installation specialist.
Suds in the tub Wrong detergent Open the dishwasher. When the foam has dissolved, pour about 4 l of cold water into the drain.Close the door, start a programme and stop it again after the pumping-out phase. If foam is still present, repeat the process.Use only the special dishwasher detergent.

Spilled rinse aid Always wipe up rinse aid spills immediately.

Problem Possible cause What to do

Stained tub interior Use of detergent with colourant		Make sure that the detergent has no colourant.
White film on inside surface	Hard water minerals To clean the interior, use a damp sponge with dishwasher detergent and wear rubber gloves.To avoid foaming or suds, never use any other cleaners.
Rust stains on cutlery	Non stainless steel utensils or flash rust from such utensils	Avoid washing items that are not corrosion resistant in the dishwasher.
White salt stains on dishes and utensiles	Salt spilled during filling, not removed	Always run a washing programme without any crockery immediately after adding salt.
	Lid of the water softener loose	Check the softener lid is secure.To remove the salt stains, carry out another wash cycle.
White lime spots on dishes and glasses	Lime deposits from hard water	Check the salt dosage setting of the water softener according to your water hardness.
Cloudiness on glassware.	Combination of soft water and too much detergent	If you have soft water, use less detergent and select a shorter cycle to wash the glassware and to get them clean.
Black or grey marks on dishes	Aluminium utensils have rubbed against dishes	Remove the stains with a mild scouring agent suitable for your dishes.
Detergent left in dispenser	Dishes block deter-gent dispenser	Re-load the dishes properly, as described before.

Problem Possible cause What to do

The dishes are not clean.	Dishes not loaded correctly	Follow the instructions in the corresponding sections.
	Programme not powerful enough	Select a more intensive program.
	Not enough detergent	Use more detergent, or use a stronger one.
	Blocked detergent dispenser flap	Rearrange the items in the basket so that the dispenser flap can open freely.
	Items blocking movement of spray arms	Rearrange the items in the basket so that the spray arms can rotate freely.
	Filter module clogged or incorrectly inserted; may also cause the spray arm jets to get blocked.	Clean and/or fit the filter correctly, as described before.
	Clogged spray arm jets	Clean the spray arm jets, as described before.
The dishes are not dry.	Improper loading Load	the dishwasher as described.
	Dishes removed too soon	Do not empty your dishwasher immediately after washing. Open the door slightly so that the steam can escape. Take out the dishes until the inside temperature is safe to touch. Unload the lower basket first to prevent the dropping water from the upper basket.
	Wrong program With a short program, the washing temperature is lower, decreasing cleaning performance. Choose a programme with a long washing time.
	Use of cutlery with a low-quality coating	Cutlery or dishes of this type are not suitable for washing in the dishwasher. Water drainage is more difficult with these items.

Problem Possible cause What to do

Knocking noise in the dishwasher	Spray arm knocking against an item in a basket.	Interrupt the programme and rearrange the items which are obstructing the spray arm.
Rattling noise in the dishwasher	Items of crockery are loose in the dishwasher	Interrupt the programme and rearrange the items of crockery.
Knocking noise in the water pipes	Unfavourable installation or cross-section of the pipeline	This has no influence on the dishwasher function. If in doubt, contact a installation specialist.

5.2 Error codes and meaning

ATTENTION!

Risk of damage with error display E4!

To avoid water damage, switch off the main water supply in the event of an overflow before taking any further steps!

If there is water in the base tray, remove it before putting the dishwasher back into operation to prevent it from malfunctioning!

Error code Meaning Possible cause

E1 Longer inlet time • Tap not fully turned on
	• Water intake restricted• Water pressure too low
E3 Not reaching required temperature.	• Malfunction of heating element
E4 Overflow • Some element of dish-washer leaks
Ed Failure of communication between main PCB with display pcb	• Open circuit• Broken communication wiring

6. Installation of the Appliance

6.1 Important notes and installation requirements

WARNING!

Risk of electric shock, injury and risk of damage!!

Incorrect installation can be dangerous to persons and cause damage!

Follow all instructions in this manual carefully and ensure a solid and correct installation!

We recommend that the appliance is installed by suitably qualified personnel!

The appliance must be disconnected from the power supply during the entire installation process!

CAUTION!

Risk of injury!

Some parts of the unit can be sharp-edged!

Protect yourself accordingly when handling the appliance, e.g. with work gloves!

The appliance is heavy!

Do not move the appliance alone, but with at least one other person and use suitable aids!

For installation, all applicable regulations, including the instructions, dimensions and spacing regulations in this manual, must be observed and complied with!

• Before installing the dishwasher, follow the instructions in the section "Unpacking and preparing...".

• Follow the instructions in this chapter in the order given and have the following aids to hand:

• Appliance and accessories including this manual
  • Measuring tool, including spirit level or similar

• Screwdriver

6.2 Water connection

Important notes and instructions before connecting the water supply

• Pipe installations and changes to the water supply should be carried out by a certified installation specialist!
• Note that a safety device against drinking water contamination due to backflow must be installed for the connection to the drinking water supply (according to DIN EN 1717)!
• If the water connection pipes are new or have not been used for a long period of time, let the water run and make sure that it is clear and free of impurities!
• Do not reuse old or used hose sets for installation!
• If your sink has a hose, it must not be installed on the same water pipe as the dishwasher, otherwise it may burst! If necessary, disconnect it and close the opening.

Safety hose / Aquastop

The supplied safety supply hose is double-walled and leak-proof (Aquastop). If the supply hose breaks or if the space between the supply hose and the outer corrugated hose fills with water, an interlock is activated which blocks the water supply.

Connecting the appliance to the cold water supply

• Pull The safety supply hoses completely out of the storage compartment located at the rear side of the dishwasher.
• Tighten the screws of the safety supply hose to the cold water tap with thread 3/4 inch. Make sure that it is firmly seated and tightly closed.
• Turn the water fully on before starting the dishwasher.

Line drawing of a faucet with a valve and handle (no text or symbols)

Disconnecting the appliance from the water supply

• Turn off the water supply.
• Unscrew the safety supply hose from the water connection.

Connecting the appliance to the water drain

- Insert the drain hose into a drain pipe with a minimum diameter of 4 cm (A) or connect it to the sink siphon (B).

Doing this, observe the following specifications:

• The drain hose must be mounted correctly and fixed and must not be kinked or squeezed.
• The drain connection must not be higher than 1000 mm above the dishwasher's installation surface.
• The free end of the hose must not be immersed in water to avoid the back flow of it.
• If an extension of the drain hose is necessary, use a similar drain hose with a maximum length of 4 meters, otherwise the cleaning effect of the dishwasher may be impaired.

1 Dishwasher rear side
2 Power supply
3 Water inlet
4 Water drain
5 Drain hose
6 Workspace

6.3 Connection to the power supply

The appliance cable is fitted with a standard plug.

To connect it to a socket, follow the instructions below:

- Before installing the appliance, make sure that it is compatible with your power supply, in particular that the local voltage and frequency match the information on the rating plate (information in V and Hz).

If you are unsure, contact your electricity supplier or a qualified electrician.

- Provide a separate circuit for connecting the appliance and protect it with a 10A/13A/16A fuse, a time-delay fuse or a circuit breaker.

- Changes to the power supply and replacement of the socket or a defective cable may only be carried out by a certified electrician.

- If the plug is no longer accessible after installation, ensure that an easily accessible all-pole circuit breaker (fuse) with a contact gap of at least 3 mm is integrated into the appliance's circuit, which complies with the applicable regulations and ensures complete disconnection of the appliance from the power supply in an emergency!

- Connect the plug of the mains cable directly to a properly earthed socket outlet near the appliance!

- Do not use multiple sockets or extension cables to connect the appliance to the mains!

These do not guarantee the necessary safety!

- Make sure that the cable cannot be kinked or twisted during and after installation and that its temperature never exceeds 75°C.

6.4 Positioning of the appliance

General notes on positioning

ATTENTION! Risk of damage!

Moisture escaping from the appliance (e.g. steam when opened the door after operation) can damage furniture parts and surfaces surrounding the appliance! Protect them adequately against moisture, especially the underside of the worktop in the case of sub-installation!

• Choose an installation position for the dishwasher near the existing inlet and drain hoses and power supply.
  Note: When building in the appliance, it may be necessary to cut a hole in the opposite cabinet side for the electrical connection, depending on where your socket is located.

Free-standing position or sub-installation

• The appliance is suitable for free-standing positioning as well as for substructure (e.g. for installation under a worktop).
• The laminated surface of the fitted cover plate as standard is heat-resistant, scratch-resistant and dirt-repellent and it requires no special care.
  It is therefore ideal as an appliance surface for free-standing positioning of the appliance.

- For sub-/installation, you can remove the pre-assembled cover plate from the top of the appliance by loosening the screws on the back of the appliance below the cover plate (A).

This will reduce the appliance height by 3 cm. Tighten the screws again after removing the cover plate (B).

- Follow the further notes and instructions in the following sections according to the desired type of installation.

Free-standing installation of the appliance

• Align the dishwasher so that its back rests against the wall behind it and the sides along adjacent furniture or walls.
• Fit the water inlet and outlet hoses on the right or left to ensure proper installation.

Fitting the appliance between pieces of furniture or other appliances

The height of the dishwasher was designed in order to allow the appliance to be fitted between existing cabinets of the same height in modern fitted kitchens.

- If necessary, adjust the height of the dishwasher accordingly by adjusting the screw height of the feet, as described in the relevant section.

Line drawing of a kitchen sink with a gridded wall and counter (no text or symbols)

Positioning of the appliance for building-in / sub-installation

Note the following notes and illustrations:

- The distance between the top of the dishwasher and the cabinet should be min. 5mm.

1 Electrical, drain and water supply
2 Space between cabi- net bottom and floor

- If the dishwasher is installed at the corner of the cabinet, there should be some space to the side when opening the door (see illustration).

6 min. 50mm

3 Dishwasher
4 Appliance door
5 Cabinet
6 Space between appliance door and cabinet

6.5 Levelling and height adjustment / adjustment of the levelling feet

The dishwasher must be level to be able to guarantee a proper washing performance and dish rack operation. To ensure this, proceed as follows:

• Check the horizontal alignment of the appliance from side to side and from front to back by placing a spirit level crosswise and lengthwise on the upper edges of the appliance, or at the bottom of the washing chamber as shown in the illustration.
• If this is not the case, level the dishwasher horizontally by adjusting the heights of the levelling feet individually, as described in the following section.

Height adjustment of the levelling feet

There are 4 feet integrated into the base of the dishwasher, which can be unscrewed individually to level the dishwasher on uneven or non-level surfaces. On delivery, these are still completely screwed in.

To adjust each foot height individually, proceed as follows:

- Adjust the respective height of the foot by lifting the appliance slightly on the relevant side and screwing it out by hand or with a flat screwdriver to the desired height as shown in the illustration.

Diagram showing a hand operating a tool on a mechanical component, with no visible text or symbols.

ATTENTION!

Risk of damage!

To avoid damage, make sure that the appliance cannot not tip over and that the angle of inclination of the appliance does not exceed 2^ when adjusting the foot heights!

- Check that the appliance is correctly positioned and readjust if necessary.

7. Technical Data

according to EN standard

Manufacturer KKT KOLBE

Model identifier DW615FS

Rated capacity 1 14 place settings

Dimensions (W×D×H) 60 × 60 × 85 cm

Type free-standing

Energy efficiency class 1 C

Energy efficiency index 1 43.9

Cleaning performance index 1 1.125

Drying performance index 1 1.065

Energy consumption 2 0.747 kWh

Water consumption 3 9.8 l

Programme duration	1 3 h 40 min
Airborne acoustical noise emissions	1	44 dB(A) re 1 pW
Airborne acoustical noise emission class	1	B
Off-mode		-
Standby mode		0.49 W
Delay start		1.00 W
Networked standby		-

1 Values based on operation in the ECO programme
2 Consumption value based on operation in the ECO programme using cold water fill. The actual energy consumption will depend on how the appliance is used.
3 Consumption value based on operation in the ECO programme using cold water fill. The actual energy consumption will depend on how the appliance is used and on the hardness of the water.

For more information on your model, use the following link or the QR code shown to access the official EU product database EPREL:

https://www.eprel.ec.europa.eu/qr/1969486

Note on product conformity

Model designation:

DW615FS

Free-standing household dishwasher

Manufacturer / Distributor:

For the above-mentioned product, the corresponding EC Declaration of Conformity is available.

Some of the relevant documents can be viewed and downloaded from our website under the corresponding product page.

You are welcome to obtain the complete documents upon written request via the above contact address.

Jan Kolbe

Head of Product Management

KKT Kolbe Support and Service

We are happy to help if anything should be wrong.

During the 24-month warranty period, our customer service will provide remedy for all malfunctions that are due to material or manufacturing defects.

Directly on site and of course free of charge!

You can reach our customer service under:

KKT KOLBE Customer service

Tel. [phone]

Mail: [e-mail]

→ You can find further data and documents on our website at Questions & Answers.

Have the following information ready for this:

Customer number

Date of invoice or delivery note

Appliance type (model number)

Serial number

Note:

You will find the 20-digit serial on the type plate

on the outside of the packaging box

or on the side of the appliance door.

If noted, you will also find it on the first page of this manual.

Min. availability of spare parts

• Spare parts according to (EU)2019/2022, Annex II, 5, (1), a 7 years after the last sale of the dishwasher, currently 24.06.2031
• Spare parts according to (EU)2019/2022, Annex II, 5, (1), b 10 years after the last sale of the dishwasher, currently 24.06.2034

Thanks for reading. We wish you lots of fun with your appliance.