303286 - Charger Aplic - Free user manual and instructions

Product Type	Wireless Fast Charger
Model	303286 / 20180522SZ132
Input Voltage	5V DC 2A or 9V DC 2A (QC3.0/QC2.0 required for fast charge)
Output Voltage	5V DC 1A or 9V DC 1.2A (Fast Charge)
Frequency Range	105-205 KHz
Transmission Power (EIRP)	-24.001 dB
Dimensions (H x W x D)	Approx. 102 x 69 x 80 mm
Charging Distance	≤ 10 mm
LED Indicator	Blue LED (charging status)
Automatic Features	Auto standby when battery full
Scope of Delivery	Wireless charger, USB cable, user manual
Compatible Devices	Smartphones supporting Qi wireless charging
Protective Case Compatibility	Charging through case possible, but may affect speed
Cleaning Method	Dry cloth, do not immerse
Safety Warnings	Do not open, avoid moisture, not for outdoor use
Disposal	WEEE compliant, do not dispose with household waste
WEEE Registration	DE 67896761
Compliance	2014/53/EC (RED), 2012/19/EU (WEEE)

Frequently Asked Questions - 303286 Aplic

How do I start using the wireless charger?

Remove all packaging, connect the USB cable to the charger and a 5V USB port (or QC adapter for fast charging). Place your Qi-compatible smartphone centered on the charger's surface. The blue LED indicates charging.

What power adapter do I need for fast charging?

For fast charging (>5W), you need a Quick Charge (QC 3.0 or QC 2.0) power supply that provides 9V DC 2A. Standard 5V adapters will only charge at normal speed.

Can I charge my phone with a protective case?

Yes, but thick or metal cases may reduce charging efficiency or prevent charging. The maximum charging distance is 10mm, so thin cases are generally fine.

How do I know when my phone is fully charged?

The blue LED remains on during charging and automatically switches off or changes to standby mode once the battery is full.

Is the wireless charger waterproof?

No, it is not waterproof. Keep it away from water, high humidity, and snow. Do not immerse in any liquid.

Can I use the charger while it's connected to a computer USB port?

Yes, you can connect to a computer USB port (5V), but the charging speed may be slower. For optimal performance, use a wall adapter.

What should I do if the charger stops working?

First check the cable and power source. Ensure your phone is Qi-compatible and placed correctly. If issues persist, contact the manufacturer. Do not attempt to repair yourself.

How should I clean the wireless charger?

Unplug the charger and wipe with a dry, soft cloth. Never use water or cleaning liquids.

Is the charger safe to use overnight?

Yes, the charger automatically switches to standby when the battery is full, preventing overcharging. It is safe for overnight use.

How do I dispose of the charger?

Do not throw it in household waste. Follow local regulations for electronic waste (WEEE). You can return it to the manufacturer, retailer, or a public collection point free of charge.

USER MANUAL 303286 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or droplet (no text or symbols)

aplic

WIRELESS FAST CHARGER

Mod.-Nr.:

303286/20180522SZ132

Table of contents

1. Deutsch ....3
2. English....6

English: Before first use, remove any protective film from the device.

Thank you for choosing an aplic product. Please read the following user manual carefully so that you can enjoy the purchased product for a long time.

1. Scope of delivery

• Wireless Charger
• USB connection cable
• User manual

2. Technical data

Operating voltage	5V DC, 2A9V DC 2A (QC3.0 / QC2.0 power supply is required)
Output voltage	5V DC 1A9V DC 1.2A (Fast Charge)
Frequency range 105-205KHz
Transmission power (EIRP)	-24,001 dB
Dimensions (H x W x D)	approx. 102mm x 69mm x 80mm
Charging distance ≤ 10mm

3. Commissioning

Take the device out of the package and remove all the packaging material. Connect the provided USB connection cable to the Wireless Charger and a 5V DC USB port such as the charger of a smartphone or, alternatively, to a USB computer port. Place the Wireless Charger on a flat surface.

Then place a smartphone that supports inductive charging in the centre of the top surface of the Wireless Charger. The blue LED on the Wireless Charger indicates that the smartphone is being charged. Once the smartphone battery is fully charged, the Wireless Charger automatically switches to standby mode.

Note: The charging time is adversely affected by the protective sheath.

Caution! If you want to charge a fast wireless charge (>5W) enabled device, make sure that a Quick Charge-enabled power supply (QC 3.0 / QC2.0 with 9V output voltage) is connected to the Wireless Charger!

4. Cleaning and Care

Never immerse the device in water or other liquids! Ensure that the device is not connected to the power supply, if you intend to clean it. Use a dry cloth to wipe the device.

5. Safety instructions and disclaimer

Never try to open the device to carry out repairs or modifications. Avoid contact with the mains voltage. Do not short-circuit the product. The device is not approved for outdoor use. Therefore please use it only in dry surroundings. Protect it from high humidity, water and snow. Do not expose the device to high temperatures. Do not expose the device to sudden changes in temperature or heavy vibrations, as this could damage the electronic components. Check the appliance for damage before using it. The device should not be used if it was subject to impact or has been damaged in some other manner. Please comply with the local regulations and restrictions.

Do not use the device for purposes other than those described in the user manual. This product is not a toy. Keep it out of the reach of children or mentally disabled persons. Any repair or modifications to the device, which are not carried out by the original supplier, will void any warranty and guarantee claims. The device should be used only by persons who have read and understood this user manual. The specifications of the device may be changed without prior notification.

6. Disposal instructions

In line with the European WEEE directive, electrical and electronic devices should not be disposed of along with domestic waste. Their components have to be separately sent for recycling or disposal, because improper disposal of toxic and dangerous components may permanently damage the environment.

According to the electrical and electronic equipment act (ElektroG), you are obliged (as a consumer) to return (free of charge) all electrical and electronic devices to the manufacturer, the point of sale, or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations. With this manner of sorting, recycling and disposal of used devices, you make an important contribution towards protecting our environment.

WEEE Guideline: 2012/19/EU WEEE Register no.: DE 67896761

The company WD Plus GmbH hereby certifies that the device 303286/20180522SZ132 complies with the fundamental requirements and all other relevant stipulations of the guideline 2014/53/EC. A complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover, https://www.ganzeinfach.de

Abstract logo design with blue and gray shapes forming a stylized 'a' or 'o' shape (no text or symbols)