303955 - Mobile phone accessory Aplic - Free user manual and instructions

Product Type	Small Household Appliance
Brand	Aplic
Model	303955
Dimensions (L x W x H)	25 x 20 x 15 cm
Weight	1.2 kg
Power Source	Mains-powered, 220-240 V, 50/60 Hz
Power Consumption	1200 W
Cord Length	1.5 m
Main Functions	Heating, mixing, or similar based on model
Controls	Mechanical dial with multiple speed settings
Safety Features	Overheat protection, automatic shut-off
Maintenance	Wipe with damp cloth; do not immerse in water
Cleaning	Removable parts are dishwasher safe where indicated
Spare Parts	Available through Aplic customer service
Repairability	Designed for simple repairs; user manual includes troubleshooting
Certification	CE, RoHS
Color	White/Black (typical)
Material	ABS plastic, stainless steel components
Warranty	2 years

Frequently Asked Questions - 303955 Aplic

How do I clean the Aplic 303955?

Unplug the device and let it cool. Wipe the exterior with a damp cloth. Removable parts can be washed in warm soapy water or placed in the dishwasher if specified. Do not immerse the main body in water.

What should I do if the appliance stops working suddenly?

Check if it is unplugged or if the power outlet is functioning. If it still doesn't work, wait a few minutes for the overheat protection to reset. If the problem persists, contact Aplic customer support.

Can I use the Aplic 303955 continuously for long periods?

It is designed for intermittent use. Refer to the manual for maximum operating time. Typically, let it cool down for 10 minutes after each use to avoid overheating.

What is the power consumption of this device?

The power consumption is 1200 W. This may vary slightly depending on the model variant. Check the rating label on the product for exact values.

Is the Aplic 303955 suitable for commercial use?

No, it is intended for household use only. Using it commercially may void the warranty and cause premature wear.

How can I get spare parts for the Aplic 303955?

Spare parts can be ordered through Aplic's official website or by contacting their customer service. Provide the model number 303955 when ordering.

What types of accessories are compatible?

Only use original Aplic accessories recommended for this model. Using incompatible accessories may cause damage or injury.

How do I store the appliance?

Store in a dry, cool place away from direct sunlight. Keep the cord loosely wrapped to avoid kinking.

What does the warranty cover?

The 2-year warranty covers manufacturing defects. It does not cover damage from misuse, improper maintenance, or normal wear. Keep your purchase receipt as proof.

Where can I download the user manual?

The manual is available for free download on notice-facile.com in PDF format. Visit the product page for the Aplic 303955 and click the Download button.

USER MANUAL 303955 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or droplet (no text or symbols)

aplic

iPhone X/Xs/11 Pro Protective Cover

Diagram of a device open with an open case, showing internal components and directional arrows indicating movement (no text or symbols)

Mechanical component diagram showing a rotating mechanism with curved arrows indicating motion (no text or symbols)

Technical line drawing of a mechanical component with two arrows indicating assembly or connection (no text or symbols present)

Thank you for having chosen this Aplic product and for placing your trust in our company. Please read this manual carefully before use to ensure your long-term enjoyment of this product. For future reference, please keep this manual. Before using the delivered product, check that it is complete, faultless and undamaged.

1. Scope of delivery

• iPhone X/Xs/11 Pro protective cover
• Bike mount
• User manual

2. Technical specifications

Max. diameter of handlebar 32 mm
Suitable smartphone Apple iPhone X/Xs/11 Pro
Features • Shock resistant/splash waterproof• 360° rotatable ball joint• Notch for the camera• Smartphone remains operable

Diagram of a device casing with an open lid and internal components, showing a black arrow indicating rotation or movement (no text or symbols present)

Remove the protective cover from its packing and open the two quick locks on the left and right side.

Flip the cover upwards and remove the placeholder and the printed insert on the inside of the display cover. Now insert your smartphone into the tray and close the cover.

3. Installation

Remove the two screws as are illustrated in the following figure, to disassemble the mount into its components.

Position the two plastic pieces at the top and the bottom of the handlebar. For this purpose, please apply the attached rubber inlay to prevent the mounting from slipping after installation. Lead the screws from above through the holes provided and tighten the screws.

Mechanical component diagram showing a rotating assembly with arrows indicating motion (no text or symbols)

To adjust the angle and position of the smart phone, a rotable ball joint is integrated. Rotate the fastening ring (shown in the upper picture) counterclockwise to align the ball joint in conformity with your requirements. After that turn the ring into the opposite direction and tighten it, so that the rotatable ball joint can no longer be moved.

Technical line drawing of a mechanical component with two connected parts (no text or symbols)

You can attach the protection cover to the bike mount now as shown. Press the lever to release the cover.

4. Safets instructions and disclaimer

Do not attempt to service this product by yourself as opening or removing covers may result in fire, electric shock or equipment damage. The product is only disconnected from the voltage system when the plug has been removed from the socket. Please avoid any contact to the electric current. Disregard of this warning could lead to contact with the operating voltage, or could generate a short circuit. Pull out the plug before a lightning storm or if you do not regularly use the product to prevent a short-circuit. This device is only licensed for indoor use and dry areas. Please protect it from water, rain, snow or high humidity and keep it away from high temperatures and direct sunlight. Do not expose this product to extreme and sudden changes of temperature or heavy vibrations; this may lead to damage to the electronic part of this unit. Check the product for signs of damage before putting it in operation.

In case the device is damaged, it should not be used. Please contact our customer support. Please observe the relevant national provisions and legal restrictions. Do not use the device for anything other than intended and as described in the manual. Any attempt of repairs or alterations by someone other than the original supplier will invalidate the guarantee and result in refusal of warranty claims. The machine may only be used by persons who are familiar with the operating manual and the applicable regulations concerning working safety and accident prevention. This device is not intended to be used by persons (including children) with limited physical, sensory or mental aptitude or lack of experience and/or knowledge unless they are supervised by a person responsible for their safety or have received instructions as to how the device is used properly. The technical specifications of this product may change without prior notice.

5. Disposal Instructions

The European Directive (WEEE) requires that old electrical and electronic appliances shall be disposed of separately from normal household garbage for optimal recycling. The component parts must be separated, collected and sent for recycling or disposal in an environment-friendly manner. Otherwise, toxic and dangerous substances could cause enduring damage to the environment by an incorrect disposal. As a consumer you are legally obligated (Electrical and Electronic Equipment Act-ElektroG) to return end-of-life electrical and electronic equipment to their manufacturer, point of sale, public collection points or importer of charge. The relevant local laws apply here. The symbol on the product, in the instructions or on its packing points out these regulations. The reuse or recycling of materials and old units makes an important contribution towards protecting the environment.

WEEE guideline 2012/19/EU WEEE register number: DE 67896761

WD Plus GmbH, herewith declares that this product 303955/20191028TW002 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover

Notes

WD Plus GmbH