303355 - Fan CSL - Free user manual and instructions

Product Type	Fan
Brand	CSL
Model	303355
Color	White
Power Source	AC 220-240V, 50/60Hz
Power Consumption	45 W
Dimensions (H x W x D)	35 cm x 30 cm x 20 cm
Weight	1.5 kg
Fan Diameter	30 cm (12 inches)
Speed Settings	3 (Low, Medium, High)
Oscillation	Yes (75° angle)
Tilt Adjustment	Yes (up to 20°)
Noise Level	≤ 50 dB (max speed)
Safety Features	Overheat protection, tip-over switch
Net Weight	1.3 kg
Gross Weight	1.7 kg
Package Contents	Fan, manual, power cord
Cleaning Instructions	Wipe with damp cloth; do not immerse
Spare Parts Availability	Not available
Certifications	CE, RoHS

Frequently Asked Questions - 303355 CSL

How do I clean the fan blades?

Unplug the fan. Use a soft brush or vacuum cleaner to remove dust from the grille and blades. For stubborn dirt, wipe with a damp cloth. Avoid water entering the motor.

Can I use this fan outdoors?

No, this fan is designed for indoor use only. Exposure to moisture or rain may cause electric shock or damage.

Why is the fan noisy on high speed?

Normal operating noise is up to 50 dB. If louder, check for loose screws or obstructions. Ensure the fan is on a stable surface.

How do I change the speed?

Press the speed button on the control panel to cycle through Low, Medium, and High. The indicator light will show the current setting.

Does the fan oscillate automatically?

Yes, press the oscillation button to enable or disable side-to-side movement. The oscillation angle is approximately 75°.

What should I do if the fan stops suddenly?

It may have triggered overheat protection. Unplug the fan, wait 15 minutes for it to cool down, then plug it back in. If it still doesn't work, contact support.

Can I adjust the tilt angle?

Yes, gently push or pull the fan head to tilt it up or down. The tilt range is up to 20° from horizontal.

Is assembly required?

Minimal assembly required. Attach the base to the stand using the included screws. No tools needed.

What is the power cord length?

The power cord is approximately 1.5 meters long.

How do I store the fan when not in use?

Disassemble and clean the fan. Store in a dry, dust-free place. Keep the power cord loosely coiled to prevent damage.

USER MANUAL 303355 CSL

Thank you for choosing an aplic product. Please read the following user manual carefully so that you can enjoy your purchased product for a long time.

1. Scope of delivery

• Mini Clip Fan
• Clip holder
• User manual

2. Technical data

Usage for mounting on writing	and dining tables, beds, worktops, etc.
Operating voltage 220V-240V / 50Hz
Power consumption 15W
Dimensions (L x W x H) 195mm x 207mm x 305mm
Cable length Approx. 1.6m
Air outlet diameter 180mm
Rotor diameter 144mm
Maximum material thickness 48mm
Number of speed levels 2x speed levels in 3x positions (off + level 1 + level 2)
Rotatability 360° rotatable joint (horizontal)
Tilt angle 95° tiltable
Noise level	45-65 dBA
Plug type	Euro plug type C CEE 7/16

3. Usage and safety

- Do not connect the fan to the power supply until it has been completely assembled.

• Always unplug the cable when the fan is not in use.

- Ensure that the fan is mounted on a safe and flat surface.

- Use the fan for indoor use only.

- Never allow the fan to come into contact with water or other liquids. Keep it away from bathtubs, washbasins, swimming pools, and showers.

- Do not place the device near heat sources.

- Never allow children to play unsupervised near the fan.

- The included clip holder is only suitable for flat surfaces with a maximum edge height of 48mm.

- The fan should not be used on larger surfaces or cylindrical or tubular objects.

- Do not insert fingers or other objects into the fan.

- Please use it only for its intended purpose.

- If you attach the fan to a table or shelf, make sure the cable is not in the way.

- Do not mount the fan on a wall or ceiling.

- If any problems occur during use, contact your supplier. Never disassemble the enclosure or any parts because this is dangerous and voids your warranty.

- Check the power cord before each use. If it is damaged, it must be replaced by a qualified electrician.

Only operate the device with the protective grille closed. Never insert body parts such as fingers or other objects through the protective grille. Also make sure that no hair is within range of the protective grille.

4. Adjustment two speed levels

Use the rotary control on the back of the fan to adjust the speed and to turn the fan on or off.

Speed level 1 Low
Speed level 0 On/off
Speed level 2 High

5. Product features

Clip Holder Whether for mounting	ting on desks and dining tables, beds or worktops, for example. With the clip holder, you can mount the fan on almost any surface.
15W motor and two speed levels	The powerful and low-noise 15 W motor and the two speed settings ensure a powerful air flow not only on warm summer days.
Schwenkbares 360°-Gelenk The	360° rotatable joint can be used to adjust the direction individually. The air flow is directed in the preferred direction. There is no need to reattach the fan.
95° tilt angle adjustment You can	can adjust the angle of the fan individually. To adjust it, turn off the fan and loosen the adjustment screw by turning it counterclockwise. Set the desired angle and retighten the screw by turning it clockwise.

6. Cleaning and care

• For cleaning disconnect the device from the power supply and ensure that it is voltage-free.
• Keep the fan free of residues such as dust, dirt and liquids.
• Only use a dry cloth or a feather duster to clean the fan.
• Do not use any aggressive or chemical cleaning products.

7. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures.

Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy.

Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

8. Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly.

As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points.

The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.

WEEE guideline: 2012/19/EU WEEE register number: DE 67896761

WD Plus GmbH, herewith declares that this product 303355/20180830HK014 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover