the Kitchen Wizz Pro BFP800 - Food processor SAGE - Free user manual and instructions

Product Type	Food Processor
Brand	Sage
Model	the Kitchen Wizz Pro BFP800
Motor Base	Direct Drive Motor Base with non-skid rubber feet
Control	POWER/OFF, PULSE buttons; Count Up & Count Down Timer; LCD Display
Processing Bowl	Large processing bowl with handle, silicone seal and max fill lines
Feed Chute	Extra Wide Feed Chute with small and large food pushers
Included Blades	4 Blade Processor, Dough Blade, Mini Processing Blade
Included Discs	Julienne Disc, Chip Cutter, Reversible Shredder, Adjustable Slicer, Whisk/Emulsifying Disc
Accessories	Disc Spindle, Storage Container with Lid, Cleaning Brush, Plastic Spatula, Mini Processing Bowl, Cord Storage, Sage Assist Plug
Safety Features	Interlocking Safety Catch, Feed Chute Safety System, Overload Protection (auto standby), Safety Interlock switch
Voltage	220-240 V (Australia/UK plug)
Cleaning	Motor base: wipe with damp cloth; Bowl, lid, pusher: hand wash or top shelf dishwasher; Blades/discs: hand wash or top shelf dishwasher (use cleaning brush)
Blade Material	Stainless steel (razor-sharp)
Dishwasher Safe Parts	Processing bowl, lid, blades, discs, spindle (top shelf only); food pusher not recommended
Overload Protection	Motor automatically goes to STANDBY mode; requires 20-30 min cool down
Intended Use	Household use only; not for crushing ice
Warranty / Support	Contact Sage Customer Service or sageappliances.com
User Manual	36 pages, available in multiple languages at sageappliances.com

Frequently Asked Questions - the Kitchen Wizz Pro BFP800 SAGE

How do I assemble the food processor correctly?

Place the processing bowl on the motor base, aligning the handle with the ALIGN HANDLE graphic. Turn clockwise until it locks. For discs, attach the disc spindle first, then the disc. Place the lid on, aligning arrows, and turn clockwise until the locking tab clicks. The processor will not operate unless both bowl and lid are locked.

Why won't my food processor start?

The safety interlock prevents starting if the bowl or lid is not properly locked. Ensure processing bowl and lid are securely locked. Also check that the feed chute is not overfilled (contents below max fill line). Verify power cord is plugged in and outlet is switched on.

What should I do if the motor stops during use?

The overload protection may have activated. Press the POWER/OFF button, unplug, and allow the food processor to cool for 20-30 minutes. Also check that the lid is securely locked. Reduce batch size if processing heavy loads.

Can I crush ice in the food processor?

No, do not crush ice in the large or small processing bowls as it will damage the blades. Use a blender for ice crushing.

How do I clean the blades and discs safely?

Hand wash in warm soapy water using the cleaning brush accessory, being careful as blades are razor-sharp. Alternatively, place blades and discs on the top shelf of the dishwasher. To prevent cuts, do not let them soak in sudsy water. The 4 blade processor cover can be attached during dishwasher cycle for extra safety.

Why is my dough not mixing properly?

When kneading dough, start the processor before adding liquid. Add liquid in a slow, steady stream through the feed chute. If dough is too dry, add water 1 tbsp at a time; if too wet, add flour 1 tbsp at a time while machine runs, until dough cleans the bowl sides.

What attachments come with the Kitchen Wizz Pro BFP800?

It includes a 4 blade processor, dough blade, mini processing blade, julienne disc, chip cutter, reversible shredder, adjustable slicer, whisk/emulsifying disc, disc spindle, storage container with lid, cleaning brush, plastic spatula, mini processing bowl, cord storage, and Sage Assist Plug.

Can I put the food pusher in the dishwasher?

No, do not place the food pusher in the dishwasher as heat may deform it. Hand wash only.

How do I store the food processor?

Do not store with the bowl fixed and lid locked, as this strains the auto operating switch. Store with attachments dry and separate. Keep out of reach of children. Use the storage container for discs and blades.

What is the maximum capacity for dough processing?

If the motor slows when mixing dough, the amount may exceed capacity. Remove half and process in two batches. Dough should not be processed for longer than 1 minute if it is stiff. Refer to the instruction booklet for specific maximum quantities.

USER MANUAL the Kitchen Wizz Pro BFP800 SAGE

Exterior view of a modern stainless steel kitchen blender with control buttons (no visible text or symbols)

EN

QUICK GUIDE

DE

KURZANLEITUNG

Sage®

CONTENTS

2 Sage® recommends safety first

6 Components

8 Assembly

10 Food processing guide

14 Care, Cleaning & Storage

15 Troubleshooting

SAGE® RECOMMENDS SAFETY FIRST

At Sage® we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

• The full information book is available at sageappliances.com
- Before using the first time ensure your electricity supply is

the same as shown on the label on the underside of the appliance.

• Remove and safely discard any packaging materials before first use.
• To eliminate a choking hazard for young children, safely discard the protective cover fitted to the power plug.
• This appliance is for household use only. Do not use the appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
• Fully unwind the power cord before operating.
• Position the appliance on a stable, heat resistant, level, dry surface away from the edge and do not operate on or near a heat source such as a hot plate, oven or gas hob.
• Vibration during operation may cause the appliance to move.
• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
  • Always ensure the appliance is turned OFF, unplugged at the power outlet and has been

SAGE® RECOMMENDS SAFETY FIRST

allowed to cool before cleaning, attempting to move or storing.

• Always turn the appliance to the off position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use.
- Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged and maintenance other than cleaning is required please contact Sage Customer Service or go to sageappliances.com
- Any maintenance other than cleaning should be performed by an authorised Sage service centre.
• Children should not play with the appliance.
- Cleaning of the appliance should not be carried out by children unless they are 8 year or older and supervised.
• The appliance and its cord should be kept out of reach of children aged 8 years and younger.
- The installation of a residual current safety switch is recommended to provide additional safety when using

all electrical appliances.

Safety switches with a rated operating current not more than 30mA are recommended. Consult an electrician for professional advice.

• Always ensure the appliance is properly assembled before use. The appliance will not operate unless properly assembled.
- Do not use the appliance on a sink drain board.
- Keep hands, fingers, hair, clothing as well as spatulas and other utensils away from moving or rotating parts during operation.
- Do not use the appliance for anything other than food and/or beverage preparation.
- In order to avoid the possible hazard of the appliance starting by itself due to inadvertent resetting of the overload protection, do not attach an external switching device (such as a timer) or connect the appliance to a circuit that can regularly switch the appliance on and off.
- Carefully read all instructions before operation and save for future reference.

• The appliance can be used by persons with reduced physical or mental capabilities or a lack of experience and knowledge, only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• This appliance shall not be used by children.
• Do not leave the appliance unattended when in use.
• Do not push food into the feed chute with your fingers or other utensils. Always use the food pusher provided. Do not place hand or fingers into the food chute when it is attached to the appliance.
• Do not place any part of the appliance in the microwave oven.
• Do not move the appliance whilst in operation.
• Handle the food processor and attachments with care – remember the blades and discs are razor-sharp and should be kept out of reach of children.

• Always secure the processing bowl onto the motor base before attaching the quad blade, dough blade or discs.
• Always operate the food processor with the processing lid securely in position.
- Ensure the OFF button has been pressed to switch the motor off and the appliance is switched off at the power outlet and unplugged before removing the lid from the bowl. The processing bowl should then be unlocked from the motor body and the quad blade, dough blade or discs carefully removed before attempting to remove the processed food.
- Please do not crush ICE in the large or small processing bowls. This will cause damage to the blades. We recommend that you use a blender for ice crushing.
- Do not process hot or boiling liquids – allow liquids to cool before placing into the processing bowl.

SAGE® RECOMMENDS SAFETY FIRST

• Do not fill bowl above marked liquid levels or shredding level. Always add drier or thicker ingredients to the processing bowl prior to adding fluids.
• To avoid possible malfunction of the processing bowl's auto switch, do not place the processing lid in the locked position when the appliance is not in use.
• Do not attempt to operate the food processor by any method other than those described in this booklet.
• Some stiff mixtures, such as dough may cause the processing blade to rotate more slowly than normal. If this happens, do not process for longer than 1 minute.

The symbol shown indicates that this appliance should not be disposed of in normal household waste.

It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.

To protect against electric shock, do not immerse the power plug, cord or appliance in water or any liquid.

SAVE THESE INSTRUCTIONS

COMPONENTS

Three circular diagrams labeled N, O, and P showing mechanical components with no visible text or symbols.

Three views of a mechanical device with labeled parts (Q, R, and a small cylindrical component), no visible text or symbols.

Close-up of a mechanical component with curved blades and a central shaft (no visible text or symbols)

Black mechanical component with curved ends and a small protrusion, labeled 'T' in the top-left corner (no other text or symbols)

Close-up of a mechanical device with multiple ports and a curved housing (no visible text or symbols)

COMPONENTS

A. Small Food Pusher
B. Large Food Pusher
C. Extra Wide Feed Chute
D. Processing Lid
E. PULSE Button
F. POWER / OFF Button
G. Feed Chute Safety System
H. Silicone Seal
I. Processing Bowl With Handle
J. Count Up & Count Down Timer
K. LCD Display
L. Direct Drive Motor Base
M. Non-skid Rubber Feet
N. Julienne Disc
O. Chip Cutter
P. Reversible Shredder
Q. Adjustable Slicer
R. Whisk / Emulsifying Disc
S. 4 Blade Processor
T. Dough Blade
U. Mini Processing Blade
V. Disc Spindle
W. Storage Container with Lid

NOT SHOWN

Cleaning Brush

Plastic Spatula

Mini Processing bowl

Cord Storage

Sage® Assist Plug

ASSEMBLY

BEFORE FIRST USE

Before using your Sage® food processor, become familiar with all the parts. Remove all packaging materials and promotional labels, being careful when handling the processing blades and discs as they are very sharp. Wash the processing bowl, processing lid and other attachments in warm, soapy water. Rinse and dry thoroughly. (Refer to cleaning, care and storage section).

1. Place the motor base on a dry, level work surface. Place the processing bowl on to the motor base with the handle in line with the ALIGN HANDLE graphic on the motor base.

Hand operating a clear omelet on a digital kitchen stand (no visible text or symbols)

1. Turn the processing bowl clockwise until the handle aligns with the TURN TO LOCK graphic. The processing bowl should be securely locked into position.

Close-up of a hand holding a kitchen appliance with a brush, pressing down on a digital kitchen scale (no text or symbols visible)

1. If using a disc, first assemble the disc spindle onto the bowl drive coupling. Orientate the disc so that the side you wish to use is facing upwards. Hold the disc by the centre plastic moulding and position the central hole above the attachment spindle. Push down firmly until fitted correctly. (Please note that these discs only fit the larger processing bowl).

Hand placing a small object into a kitchen blender with a downward arrow indicating action (no text or symbols visible)

1. For using the processing blades, carefully grasp either the 4 blade processor, dough blade or mini processing blade using the central plastic support and position it over the bowl drive coupling and push down until inserted correctly. If using the mini processing blade, ensure the mini processing bowl is assembled into the main bowl first.

Close-up of a kitchen blender with a black tool inserted, showing liquid and control buttons (no text or symbols visible)

ASSEMBLY

1. Place the processing lid onto the processing bowl so the feed chute is slightly right of the bowl handle and the arrow graphics are aligned HOLDING the feed chute and pressing down firmly at the same time, turn the lid clockwise (as indicated by the graphic) so the 'Locking Tab' on the lid slots into the 'Interlocking Safety Catch' on the handle. The lid should be securely locked into position.

Hand operating a kitchen blender with a hand holding the lid and blade (no text or symbols visible)

NOTE

The food processor will not operate unless both the processing bowl and lid are correctly locked into position.

CAUTION

The processing blade (including the mini bowl blade) and discs are extremely sharp, handle with care at all times.

1. Insert the power plug into a 220–240 volt power outlet and switch the power outlet on.
2. At the end of processing, always wait until the blades or discs have stopped spinning before unlocking and removing the lid. To remove the processing lid, ensure the POWER / OFF button has been pressed, the power is switched off at the power outlet and the cord is unplugged from the power outlet. Holding the feed chute and pressing down firmly at the same time, turn the lid anti-clockwise so that the arrow graphics are no longer aligned.
3. Remove the processing bowl (before removing blade or discs) by turning it anti-clockwise until the handle is in line with the ALIGN HANDLE. Lift the bowl off the motor shaft. When removing the discs – carefully remove by gripping the plastic hub on the centre of the disc and lifting the disc up and away from the pin on the spindle.

OVERLOAD PROTECTION SYSTEM

If the motor overloads, the food processor will go to STANDBY mode and OVERLOAD icon in the LCD starts to flash. The food processor can still be switched off by pressing the POWER / OFF button. To operate the food processor again, allow the machine to cool for approx 30 minutes.

Some stiff mixtures, such as dough, may cause the dough blade to rotate more slowly than normal. If this happens, do not process for longer than 1 minute.

NOTE

The food processor is very powerful and recommended using PULSE function where possible as to avoid over chopping or whipping.

FOOD BLADE TYPE (DOUGH/4 BLADE PROCESSOR/MINI)		ADJUSTABLE SLICING BLADE THICKNESS	RECOMMENDED DISC TYPE (CHIP/SHRED/JULIENNE/WHISK)
Avocado 4 blade	processor or miniUse: Guacamole	2-5
Asparagus (cooked)	4 blade processor or miniUse: Asparagus Dip
Beetroot 2-5 Shredding Use:			Salad
Broccoli (cooked)	4 blade processorUse: Broccoli Soup
Cabbage Thin 1-2 and med 2-3		Use: Accompaniment	Shredding Use: Salad
Carrot 4 blade processor or miniUse: Vegetable Soup		0-5 Shredding Use:	Salad
Cauliflower (cooked)	4 blade processor or miniUse: Cauliflower Soup
Celery 4 blade processor or miniUse: Vegetable Soup		Thin 1-2 med 2-3Use: Salad
Chilli 4 blade processor or miniUse: Seasoning
Aubergine 4 blade processor or miniUse: Accompaniment, soups		2-5Use: Grilled aubergine	Shred or Julienne Use: Accompaniment to dishes
Garlic 4 blade processor or miniUse: Seasoning
Ginger	4 blade processor or miniUse: Seasoning
Herbs	4 blade processor or miniUse: Seasoning pesto
Leeks	4 blade processor or miniUse: Cooked for soups	2-5Use: Vegetable Soup
Lettuce		2-4Use: Salad

FOOD PROCESSING GUIDE

FOOD BLADE TYPE (DOUGH/4 BLADE PROCESSOR/MINI)		ADJUSTABLE SLICING BLADE THICKNESS	RECOMMENDED DISC TYPE (CHIP/SHRED/JULIENNE/WHISK)
Mushrooms (raw)	4 blade processor or mini Use: Vegetable Soup	4-6 Use: Salad, vegetable soup, mushroom sauce, mushroom soup"
Mushrooms (cooked)	4 blade processor Use: Mushroom Soup	4-6 Use: Salad, vegetable soup, mushroom sauce, mushroom soup
Onion 4 blade processor or mini Use: Soups, Sauces		0-5 Use: Salad
Parsnip 4 blade processor or mini Use: Vegetable soup		2-5 Use: Vegetable lasagna
Parsnip (cooked)	4 blade processor Use: Accompaniment
Peas (cooked)	4 blade processor or mini Use: Accompaniment, baby food
Potatoes 0.5-6		Use: Potato bake	Chip / Julienne / Shredder Use: Chips
Potatoes (cooked)	4 blade processor or mini Use: Mash potato, Skordallia
Spinach 4 blade processor or mini Use: Accompaniment
Spinach (cooked)	4 blade processor or mini Use: Creamed spinach
Swede 4 blade processor or mini Use: Vegetable Soup, creamed swede
Tomatoes 4 blade processor or mini Use: Salsa		2-5 Use: sandwich filling, Tomato Bocconcini Salad, tomato relish
Courgette 3-6		Use: Accompaniment, courgette slice, gratin	Shredder – Coarse or fine Use: Salad, Frittata
Apple 4 blade processor or mini Use: Apple sauce		2-5 Use: Apple galette
Apple (cooked)	4 blade processor or mini Use: Baby food	4-6 Use: Fruit Salad
Banana	4 blade processor or mini Use: Dessert sauces
Berries 4 blade processor or mini Use: Fruit salad
Citrus Fruit 4 blade processor or mini Use: Fruit mince
Citrus Peel 4 blade processor or mini Use: Fruit mince
Dried Fruit 4 blade processor or mini Use: Fruit salad, dessert sauce
Kiwi fruit 4 blade processor or mini Use: Fruit salad, dessert sauce		4-6 Use: Dessert decoration
Mango 4 blade processor or mini Use: Fruit salad, dessert sauce
Melon (Honeydew / rockmelon)	4 blade processor or mini Use: Fruit salad
Pear 4 blade processor or mini Use: Fruit salad		4-6 Use: Pear pie
Pear (cooked) 4 blade processor or mini Use: Baby food
Pineapple 4 blade processor or mini Use: Fruit salad
Stone Fruit (Apricot, nectarine, peach, plum)	4 blade processor or mini Use: Fruit salad, dessert sauce
Strawberries 4 blade processor or mini Use: Fruit salad, dessert sauce
Batters Dough	Use: Cakes, crepes		Whisk Use: cakes, muffins, crepes
Breadcrumbs 4 blade processor or mini Use: Coatings, breadcrumb stuffing
Cheese Shredder	- Coarse		or Fine Use: Grated Cheese

FOOD PROCESSING GUIDE

FOOD BLADE TYPE (DOUGH/4 BLADE PROCESSOR/MINI)		ADJUSTABLE SLICING BLADE THICKNESS	RECOMMENDED DISC TYPE (CHIP/SHRED/JULIENNE/WHISK)
Chocolate 4 blade	processor or miniUse: Chocolate Ganache		Shredder – Coarse or FineUse: Dessert decoration
Cream Cheese 4	blade processor or miniUse: Dips, cheese cake
Doughs Dough	Use: Pastry, scones, bread
Egg Whites use PULSE function			WhiskUse: Egg foams (not recommended for meringue, pavlova)
Eggs (hard boiled)	4 blade processor or miniUse: Sandwich filling	2–5Use: sandwich filling
Eggs (whole or yolks) use PULSE function			WhiskUse: Mayonnaise
Cream use PULSE function			WhiskUse: recommended PULSE function to avoid over whipping
Milkshakes and smoothies	4 blade processorUse: recommend using PULSE function
Meat (raw) use PULSE function	4 blade processorUse: Mince meatloaf, burgers
Meat (cooked) use PULSE function	4 blade processorUse: Sandwich fillings, pate, baby food
Meat (deli) 1–6		Use: Sandwiches, antipasto, pizza toppings

CARE AND CLEANING

When finished processing, switch the food processor off at the power outlet and unplug the power cord.

Motor base

Wipe the motor base with a clean, damp cloth after each use. Dry thoroughly with a soft, clean cloth.

Processing bowl, lid and food pusher

Hand wash in hot, soapy water using a mild detergent. Do not use a scourer or abrasive cleaners as they will scratch the plastic surface. The plastic parts may occasionally be washed in the dishwasher (top shelf only). It is not recommended on a regular basis, as prolonged exposure to hot water temperatures and harsh detergents will damage and shorten the life of the plastic.

NOTE

Do not place food pusher in the dishwasher as the heat may deform it.

Processing 4 blade processor, dough blade and discs

Hand wash the bowl and lid. Use the cleaning brush accessory to scrub stubborn foods off the blades and discs. The handle end of the brush is designed for scraping.

To avoid accidental cuts, do not leave 4 blade processor or discs to soak in sudsy water. The 4 blade processor, dough blade, discs and spindle can also be washed in the dishwasher (top shelf only).

NOTE

The 4 blade processor cover can be assembled onto the 4 blade processor while it is placed in the dishwasher for added safety.

WARNING

The 4 blade processor, mini and adjustable processing blades and discs are extremely sharp, handle with care at all times.

Never immerse the motor base, power cord or power plug in water or any other liquid.

Never store your food processor with the bowl fixed and lid locked into position. Doing so will cause unnecessary strain on the auto operating switch on the handle of the processing bowl and the automatic safety switch on the motor base.

Do not put any part of the food processor in the microwave oven.

TROUBLESHOOTING

PROBLEM EASY SOLUTION
Food is unevenly processed	Ingredients should be cut evenly into 2.5cm pieces before processing.Ingredients should be processed in batches to avoid overloading.
Slices are slanted or uneven	Load food in feed chute. Place pusher onto food and apply pressure. Then press start.
Food falls over in the feed chute	The large feed chute must be packed full for best results.If processing smaller quantities, use the small feed chute.
Chipper disk	Always clear any blocked potato from the chipper disc before processing more potatoes.
Some food remains on the disc after processing	It is normal for small pieces to remain after processing.
Motor slows down when mixing dough	Amount of dough may exceed maximum capacity.Remove half and process in two batches.Dough may be too wet (see next page). If motor speeds up, continue processing. If not, add more flour, 1 tablespoon at a time until the motor speeds up. Process until dough cleans the side of the processing bowl.
Motor slow to start with the 4 blade processor	The amount of meat may have exceed the maximum capacity.Refer to the Instruction Booklet for maximum quantities.Remove the meat and process in two batches.Note that for best results trim the meat of fat before processing.
The motor does not start	There is a safety interlock switch to prevent the motor from starting if it is not properly assembled. Make sure the processing bowl, lid and the pusher are securely locked into position.If you are slicing or shredding and the above solution does not work, make sure that the food contents in the feed chute are cut below the maximum fill line so that the activation rod can engage the motor.If the motor still will not start, check the power cord and power outlet.

TROUBLESHOOTING

PROBLEM EASY SOLUTION
The food processor shuts off during operation	· The lid may have become unlocked, check to make sure it is securely in position.· If the motor overloads, the ‘OVERLOAD’ icon in the LCD will start to flash. Switch off by pressing the POWER / OFF button and unplug the power cord. Allow the food processor to cool for 20–30 minutes before resuming.
The motor slowed down during operation	· This is normal as some heavier loads may require the motor to work harder. Reposition the food in the feed chute and continue processing.· The maximum load capacity may have been exceeded. Refer to the Instruction Booklet for maximum quantities. Remove some of the ingredients and continue processing.
The food processor vibrates/moves during processing	· Make sure the rubber feet at the bottom of the unit are clean and dry. Also make sure that the maximum load capacity is not being exceeded.
Dough doesn’t fully incorporate ingredients	· When kneading dough, always start the food processor before adding liquid. Add liquid in a slow, steady stream, allowing the dry ingredients to absorb it. If too much liquid is added, wait until ingredients in the processing bowl have mixed, then add remaining liquid slowly (do not turn off the machine). Pour liquid onto the dough as it passes under the feed chute opening, do not pour liquid directly onto the bottom of the processing bowl.
Dough feels tough after kneading	· Divide dough into 2 or 3 pieces and redistribute evenly in processing bowl. Process 10 seconds or until uniformly soft and pliable.
Dough is too dry	· While machine is running, add water through the small feed chute, 1 tablespoon at a time until dough cleans the inside of the processing bowl.
Dough is too wet	· While machine is running, add flour through the small feed chute, 1 tablespoon at a time until dough cleans the inside of the processing bowl.

NOTES

INHALT

Three circular diagrams labeled N, O, and P showing mechanical components with no visible text or symbols.

Three views of a mechanical device with labeled parts (Q, R, and a small cylindrical component), no visible text or symbols.

Close-up of a mechanical component with curved blades and a central shaft (no visible text or symbols)

Black mechanical component with curved ends and a small protrusion, labeled 'T' in the top-left corner (no other text or symbols)

Close-up of a mechanical device with three cylindrical components and a curved housing (no visible text or symbols)

KOMPONENTEN

Hand operating a clear glass coffee maker on a digital kitchen scale (no visible text or symbols)

Close-up of a hand using a kitchen blender with a brush, showing liquid and a small container (no text or symbols visible)

Person using a kitchen blender with a hand adjusting the lid (no text or symbols visible)

Close-up of a kitchen blender with a brush applying liquid, showing a downward arrow (no text or symbols visible)

Hand operating a kitchen blender with a hand holding the lid and blade (no text or symbols visible)

HINWEIS

BRG Appliances Limited

Unit 3.2, Power Road Studios, 114 Power Road, London, W4 5PY

Freephone (UK Landline): 0808 178 1650

Mobile Calls (National Rate): 0333 0142 970

www.sageappliances.com

Registered in Germany No. HRB 81309 (AG Düsseldorf).

Registered in England & Wales No. 8223512.

Due to continued product improvement, the products illustrated or photographed in this document may vary slightly from the actual product.

Copyright BRG Appliances 2017.