Pre-XR - Headphones CYRUS - Free user manual and instructions
Find the device manual for free Pre-XR CYRUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Headphones |
| Brand | Cyrus |
| Model | Pre-XR |
| Dimensions (approx.) | 180 x 150 x 80 mm |
| Weight (approx.) | 250 g |
| Power Supply | Rechargeable Li-ion battery via USB-C |
| Battery Life (approx.) | 20 hours |
| Connectivity | Bluetooth 5.0, USB-C port |
| Active Noise Cancellation | Yes |
| Controls | Touch controls on earcups |
| Microphone | Built-in for calls |
| Driver Size | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ω |
| Maintenance | Clean with a soft, dry cloth |
| Safety | Use at moderate volume to prevent hearing damage |
| Spare Parts | USB-C cable, replacement ear cushions |
| Repairability | Supported by Cyrus technical service |
| General Information | User manual available for download in PDF |
Frequently Asked Questions - Pre-XR CYRUS
How do I connect the headphones via Bluetooth?
To connect your Cyrus Pre-XR headphones via Bluetooth, first ensure the headphones are charged. Press and hold the power button for 3 seconds until the LED flashes blue. On your device, enable Bluetooth and select 'Cyrus Pre-XR' from the list. If prompted, enter 0000 as the PIN.
How do I charge the headphones?
Use the provided USB-C cable to connect the headphones to a USB power source (e.g., computer, wall adapter). The LED indicator will turn red during charging and becomes blue when fully charged. A full charge takes approximately 2 hours.
What is the battery life of the Pre-XR?
The Cyrus Pre-XR headphones offer up to 20 hours of playback time on a full charge. Battery life may vary depending on volume level and use of Active Noise Cancellation.
How do I activate Active Noise Cancellation?
Press the ANC button on the left earcup to toggle Active Noise Cancellation on or off. When activated, you will hear a voice prompt saying 'Noise cancellation on'. The LED will also change to a solid green color.
Are the headphones water-resistant?
The Cyrus Pre-XR headphones are not water-resistant. Avoid exposure to rain, sweat, or moisture to prevent damage. Clean only with a dry cloth.
How do I clean the ear cushions?
Remove the ear cushions gently by pulling them off. Wipe them with a soft, damp cloth and mild soap if needed. Let them air dry completely before reattaching. Do not use abrasive cleaners.
Can I use the headphones while charging?
Yes, you can use the Cyrus Pre-XR headphones in passive mode via the USB-C cable (not supported for Bluetooth). However, wireless playback is disabled during charging. For best experience, charge fully before use.
What should I do if the headphones won't turn on?
First, ensure the headphones are charged. Try resetting by pressing and holding the power button for 10 seconds. If still unresponsive, connect to a charger and check the LED. If no LED appears, contact Cyrus support.
How do I reset the headphones to factory settings?
To reset, turn off the headphones. Then press and hold the volume up and power button simultaneously for 5 seconds. The LED will flash red and blue twice, indicating a successful reset. All paired devices will be cleared.
Where can I find spare parts for my Pre-XR?
Spare parts such as replacement ear cushions and USB-C cables are available through the official Cyrus website or authorized dealers. For repairs, contact Cyrus technical support for assistance.
User questions about Pre-XR CYRUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual Pre-XR - CYRUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pre-XR by CYRUS.