VigorSwitch P2280 - Switch Draytek - Free user manual and instructions
Find the device manual for free VigorSwitch P2280 Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Switch |
| Ports | 28 (24 x Gigabit RJ45 + 4 x SFP) |
| Data Rate | 10/100/1000 Mbps |
| Power Supply | 100-240V AC, 50-60Hz |
| Power Consumption | Approx. 30W |
| Dimensions (WxDxH) | 440 x 200 x 44 mm (1U rackmount) |
| Weight | Approx. 3 kg |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% non-condensing |
| Management | Web interface, CLI, SNMP |
| Key Features | VLAN, QoS, Spanning Tree, Link Aggregation, IGMP Snooping |
| Security | ACL, 802.1X, SSH, SSL |
| Rack Mountable | Yes (1U) |
| Cooling | Fan(s) – low noise |
| Warranty | 3 years limited |
| General Information | Brand: Draytek; Model: VigorSwitch P2280 |
| Maintenance & Cleaning | Clean with a dry cloth; keep away from moisture and dust |
| Spare Parts & Repairability | Contact qualified technician; use only Draytek-approved parts |
Frequently Asked Questions - VigorSwitch P2280 Draytek
What is the default IP address of the VigorSwitch P2280?
The default IP address is typically 192.168.1.1 for management access.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the LEDs flash.
Does the VigorSwitch P2280 support VLAN?
Yes, it supports 802.1Q VLAN with up to 4094 VLAN groups and port-based VLAN.
Can I use the SFP ports for fiber connections?
Yes, the four SFP slots support 1000Base-SX/LX fiber modules and also 100Base-FX.
How do I update the firmware?
Go to the web management interface under Maintenance > Firmware Upgrade, upload the .bin file, and reboot.
What is the power consumption in standby?
The typical power consumption in standby is around 20W depending on link status.
Is the switch fanless?
No, it has internal fans for active cooling, but they operate at a low noise level.
Does it support PoE?
No, the VigorSwitch P2280 is a non-PoE model; it does not provide Power over Ethernet.
What is the maximum number of MAC addresses?
The switch supports up to 16K MAC addresses.
Where can I download the user manual?
The user manual is available for free download on notice-facile.com or the official Draytek website.
User questions about VigorSwitch P2280 Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual VigorSwitch P2280 - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorSwitch P2280 by Draytek.
USER MANUAL VigorSwitch P2280 Draytek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draytek
Model : VigorSwitch P2280
Category : Switch