VigorSwitch P2540xs - Switch Draytek - Free user manual and instructions
Find the device manual for free VigorSwitch P2540xs Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch with 10G uplink |
| Ports | 24x 10/100/1000 PoE+ (370W budget), 4x SFP+ 10G |
| Switching Capacity | 128 Gbps |
| Dimensions (W x D x H) | 440 x 250 x 44 mm (1U rack-mountable) |
| Weight | Approximately 3.5 kg |
| Power Supply | Internal AC 100-240V, 50/60Hz |
| PoE Standard | IEEE 802.3af/at PoE+ on all 24 copper ports |
| Management Features | Web GUI, CLI, SNMP, VLAN, QoS, IGMP snooping, LACP, loop detection, PoE scheduling |
| Maintenance | Keep ventilation slots clear; avoid moisture; perform periodic firmware upgrades |
| Safety | Use only provided power cord; do not open chassis; operate in a dry, well-ventilated area |
| Spare Parts | Power supply unit, fan module (if applicable), SFP+ transceivers (separate purchase) |
| Repairability | User-replaceable fan and power supply; other repairs require authorized service |
| Energy Efficiency | IEEE 802.3az Energy Efficient Ethernet (EEE) on copper ports |
| Operating Temperature | 0°C to 50°C |
| General Information | DrayTek brand; model VigorSwitch P2540xs; rack-mount kit included; 2-year limited warranty |
Frequently Asked Questions - VigorSwitch P2540xs Draytek
How to reset the VigorSwitch P2540xs to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the Status LED flashes rapidly. Release the button; the switch will reboot with factory settings.
How to access the web management interface?
Connect your computer to any LAN port. Set your computer's IP to 192.168.1.x (e.g., 192.168.1.100). Open a browser and go to http://192.168.1.1. Default login: admin / admin.
What is the maximum PoE power budget?
The switch provides a total PoE power budget of 370W across all 24 PoE+ ports, sufficient for devices like IP cameras and wireless access points.
Can I use standard 1G SFP modules in the SFP+ slots?
Yes, the SFP+ slots are backward compatible with 1G SFP modules. Ensure they are inserted correctly and configured for the appropriate speed.
How to configure VLANs on this switch?
Access the web GUI, go to VLAN configuration. Create VLAN groups, assign ports as tagged or untagged. Use 802.1Q VLANs. Apply settings and save.
Does the VigorSwitch P2540xs support link aggregation (LACP)?
Yes, it supports IEEE 802.3ad LACP. You can group multiple ports into a trunk to increase bandwidth and redundancy. Configure under 'Port Trunk' in the web GUI.
How to update the firmware?
Download the latest firmware from DrayTek's website. In the web GUI, go to Maintenance > Firmware Upgrade. Upload the file; the switch will reboot after successful upgrade. Do not power off during the process.
What is the operating temperature range?
The switch can operate in temperatures from 0°C to 50°C. Ensure adequate ventilation and avoid direct sunlight for reliable performance.
How to enable PoE scheduling?
Navigate to PoE > PoE Scheduling in the web interface. Enable scheduling per port, set power-on and power-off times for each day of the week. Useful for energy saving.
Does the switch support SNMP?
Yes, it supports SNMP v1/v2c/v3. Configure SNMP communities and traps in the web GUI under Management > SNMP. Use MIB files for monitoring.
User questions about VigorSwitch P2540xs Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual VigorSwitch P2540xs - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorSwitch P2540xs by Draytek.