VigorSwitch P2282x - Switch Draytek - Free user manual and instructions
Find the device manual for free VigorSwitch P2282x Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Model | VigorSwitch P2282x |
| Ports | 24× 10/100/1000 Mbps RJ-45 + 4× 1G/10G SFP+ |
| Switching Capacity | 128 Gbps |
| Packet Forwarding Rate | 95.2 Mpps (64-byte packets) |
| Dimensions (W × D × H) | 440 × 200 × 44 mm (1U rack-mountable) |
| Weight | 2.5 kg (approx.) |
| Power Supply | 100-240 V AC, 50/60 Hz internal PSU |
| Max Power Consumption | 30 W |
| Management | Web GUI, CLI (Telnet/SSH), SNMP v1/v2c/v3 |
| VLAN Support | 802.1Q VLAN, up to 256 VLAN groups |
| Quality of Service | 802.1p, DSCP, queue scheduling (SP, WRR) |
| Link Aggregation | Static and LACP (IEEE 802.3ad), up to 8 groups |
| Security Features | 802.1X, ACL, port security, DHCP snooping |
| PoE Support | None (non-PoE model) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Certifications | CE, FCC Class A |
| Included Accessories | Power cord, rack-mount kit, console cable, quick start guide |
| Warranty | 3 years (subject to region) |
Frequently Asked Questions - VigorSwitch P2282x Draytek
How do I reset the Draytek VigorSwitch P2282x to factory defaults?
Press and hold the Reset button (located on the front panel) for at least 10 seconds until the system LED blinks rapidly. Release the button; the switch will reboot with factory settings.
What is the default IP address of the VigorSwitch P2282x?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0. The default username is admin and password is admin.
Does the VigorSwitch P2282x support PoE (Power over Ethernet)?
No, the VigorSwitch P2282x is a non-PoE model. It does not provide power over Ethernet ports.
How do I configure VLANs on the VigorSwitch P2282x?
Access the web GUI, go to VLAN settings. You can create 802.1Q VLANs, assign tagged/untagged ports, and set a management VLAN. For CLI, use commands like vlan database and vlan 10.
Can I update the firmware of the VigorSwitch P2282x?
Yes, download the latest firmware from Draytek's website. In the web GUI, go to Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not power off the switch during the process.
Is the VigorSwitch P2282x rack-mountable?
Yes, it is 1U height and comes with a rack-mount kit. Attach the brackets to the sides and secure the switch in a standard 19-inch rack.
What cable do I need for console access?
You need a straight-through RS-232 serial cable with a DB9 female connector on one end and RJ-45 on the other (supplied). Connect to the console port and use terminal software (9600 baud, 8N1).
What are the operating temperature limits?
The switch can operate in temperatures from 0°C to 40°C (32°F to 104°F). Store it between -20°C and 70°C.
Does the VigorSwitch P2282x support Link Aggregation?
Yes, it supports both static and dynamic LACP (IEEE 802.3ad). You can create up to 8 trunk groups with up to 8 ports per group via the web GUI or CLI.
What is the warranty period for the VigorSwitch P2282x?
Draytek typically offers a 3-year limited warranty for this switch. Check your local distributor for exact terms.
User questions about VigorSwitch P2282x Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual VigorSwitch P2282x - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorSwitch P2282x by Draytek.
USER MANUAL VigorSwitch P2282x Draytek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draytek
Model : VigorSwitch P2282x
Category : Switch