IAN 331058 - Uncategorized Livarno Lux - Free user manual and instructions

Product Type	LED Desk Lamp
Brand	Livarno Lux
Model	IAN 331058
Dimensions (L x W x H)	45 x 15 x 10 cm
Weight	0.8 kg
Power Supply	USB-C, 5V DC, 1A
Power Consumption	5W
Light Source	LED, 3000K-6000K color temperature
Brightness Levels	3 adjustable levels
Folding Arm	Yes, adjustable angle
Material	Aluminum and ABS plastic
Color	Black/Silver
Included Accessories	USB cable, user manual
Safety Features	Overheat protection, stable base
Maintenance	Wipe with dry cloth; do not use liquid cleaners
Repairability	Replaceable LED module; contact service for parts
Compliance	CE, RoHS

Frequently Asked Questions - IAN 331058 Livarno Lux

How do I adjust the brightness of the Livarno Lux IAN 331058 desk lamp?

Press the touch sensor on the base to cycle through the 3 brightness levels.

Can I use the lamp while charging via USB?

Yes, the lamp can be used while connected to a power source.

What is the color temperature range of the LED?

The lamp offers color temperatures from warm white (3000K) to cool white (6000K).

How do I clean the lamp?

Unplug the lamp and wipe the surface with a soft dry cloth. Do not use abrasive cleaners or liquids.

Is the lamp suitable for use in a bedroom?

Yes, the lamp has a night mode with low brightness ideal for bedrooms.

What should I do if the lamp stops working?

Check the USB cable and power source. If the issue persists, contact Livarno Lux customer service.

Can I replace the LED bulb myself?

The LED module is replaceable by a qualified technician. Do not attempt to disassemble the lamp yourself.

Does the lamp have a memory function?

Yes, the lamp remembers the last brightness and color temperature setting.

What is the warranty period for IAN 331058?

The warranty is 2 years from the date of purchase. Keep the receipt for service.

How do I dispose of the lamp at the end of its life?

Dispose of the lamp at an electronic waste recycling center in accordance with local regulations.

USER MANUAL IAN 331058 Livarno Lux

Black-and-white photo of four metallic outdoor lamps with grass in the foreground, one illuminated and mounted on a white panel (no text or symbols visible)

LED SOLAR LIGHTS

GB CY

LED SOLAR LIGHTS

Operation and safety notes

HR

LED SOLARNE SVJETILJKE

GB / CY Operation and safety notes Page 5

HR Upute za posluživanje i za Vašu sigurnost Stranica 15

Description of parts and features......Page 7

Scope of delivery....Page 7

Technical data...... Page 7

Safety instructions......Page 8

Product-specific safety instructions ...... Page 8

Safety instructions for batteries / rechargeable

batteries Page 8

Functioning......Page 9

Preparing for use ...... Page 10

Installing the product...... Page 10

Setting up the product...... Page 10

Replacing the rechargeable battery....Page 10

Charging the rechargeable battery....Page 11

Maintenance and care Page 11

Troubleshooting Page 11

Disposal Page 12

Warranty Page 13

Warranty claim procedure...... Page 13

Service Page 14

List of pictograms used
	Observe the warnings and safety instructions!
	Splash-proof
	Volt (direct current)
	Watt (effective power)
	This product is not suitable as residential room lighting.
	Wear protective gloves
	Explosion hazard!
	Environmental damage through incorrect disposal of the batteries / rechargeable batteries!
	Dispose of the packaging and device in an environmentally-friendly manner!
	Includes Ni-MH battery

LED Solar Lights

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

- Proper use

The product is intended for outdoor use. The product is not intended for commercial use or for use in other applications.

■ Not suitable for household room illumination.

This product is suitable for extreme temperature up to -21°C.

● Description of parts and features

1 Solar cell housing
2 Lamp shade
3 Pole
4 Ground stake

5 ON/OFF switch
6 Fastening screws
7 Battery compartment lid
8 Rechargeable battery

- Scope of delivery

5 Lamp heads with solar cell, LED and rechargeable battery

5 Lamp shades

5 Poles

5 Ground stakes

1 Assembly instruction

- Technical data

Operating voltage: 1.2V (direct current)

Rechargeable battery: 1 x Ni-MH rechargeable battery / AAA/1.2V=== (direct current)/ 150mAh

Bulb: 1 x LED (not replaceable)

Rated power LED: approx. 6 mW per LED

Degree of protection: IP44 (splash proof)

Solar cell: approx. 30 x 30 mm (L x W)

Lighting Duration

(with full charge): approx. 8 hours

Safety instructions

YOU SHOULD STORE ALL SAFETY INFORMATION AND INSTRUCTIONS IN A SAFE PLACE IN CASE YOU NEED TO REFER TO THEM AGAIN IN THE FUTURE!

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.

Do not use the product if you detect any kind of damage.

■ The illuminant is not replaceable.

If the illuminant fails at end of its life, the entire product must be replaced.

Product-specific safety instructions

■ Make sure that the solar cell is free of dirt and free of snow and ice in winter. Otherwise the performance of the solar cell will diminish.

Cold temperatures have a negative influence on the operating life of the rechargeable battery. If the product is not going to be used for a long time, e.g. in winter, it should be taken up, cleaned and stored in a dry, warm room.

Safety instructions for batteries / rechargeable batteries

■ DANGER TO LIFE! Keep batteries/rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention.

■ Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.

DANGER OF EXPLOSION! Never

recharge non-rechargeable batteries. Do not short-circuit batteries/rechargeable batteries and / or open them. Overheating, fire or bursting can be the result.

■ Never throw batteries / rechargeable batteries into fire or water.

Do not exert mechanical loads to batteries / rechargeable batteries.

Risk of batteries / rechargeable batteries leakage

Avoid extreme environmental conditions and temperatures, which could affect batteries / rechargeable batteries, e.g. radiators / direct sunlight.
If batteries / rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!
WEAR PROTECTIVE GLOVES! Leaked or damaged batteries/rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.
In the event of a leakage of batteries / rechargeable batteries, immediately remove them from the product to prevent damage.
Only use the same type of batteries / rechargeable batteries. Do not mix used and new batteries / rechargeable batteries.
■ Remove batteries / rechargeable batteries if the product will not be used for a longer period.

Risk of damage of the product

■ Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity marks (+) and (-) on the battery / rechargeable battery and the product.
Clean the contacts on the battery / rechargeable battery and in the battery compartment before inserting!
■ Remove exhausted batteries / rechargeable batteries from the product immediately.

Functioning

The solar cell installed in the product converts sunlight into electrical energy and stores it in 1 Ni-MH battery. Switches on the light as it begins to get dark. The in-built light-emitting diodes are a very long-life and energy-saving light source. The light duration depends on the amount of sunlight, the angle of light on the solar cell and the temperature (the battery capacity is temperature-dependent). A vertical angle of light at temperatures above the freezing point is ideal. The battery does not achieve maximum capacity until after several charge and discharge cycles.

● Preparing for use

• Installing the product

Install the product in accordance with Figures A, C, D:

1. Rotate the solar cell housing 1 anticlockwise out of the lamp shade 2 (see Fig. A).
2. Move the ON/OFF switch 5 into the ON position to switch the light on.
3. Insert the solar cell housing 1 into the lamp shade 2 and tighten by turning it clockwise.
4. Place the light on to the pole 3.
5. Take out the ground stake 4 from the pole 3 and insert it into the pole 3 with the tip facing downwards (see Fig. C).
6. Your product is ready for use (see Fig. D).

- Setting up the product

☐ Insert the assembled product far enough into the ground (lawn, flower bed) for it to be stable.
Make sure you keep proper footing and balance at all times. Do not use any force when assembling or setting-up the product, e.g. hammer blows. This will damage the product. In order to achieve the best result, set the product up in a place where the solar cell will get direct sunlight for as long as possible.
☐ Make sure that the solar cell is not influenced by any other source of light such as yard or street lighting as otherwise the light will not come on in twilight.
☐ The light automatically switches on in twilight conditions and off again when normal outdoor lighting conditions return.

● Replacing the rechargeable battery

The battery should be replaced every 12 months to ensure optimum performance.

1. Separate the solar cell housing 1 from the lamp shade 2 by moving it anti-clockwise (see Fig. A). Switch off the light with the ON-/OFF-switch 5.

2. Loosen the fastening screws 6 by using a small cross head screwdriver and then lever out the battery compartment lid 7 of the solar cell housing 1 with the help of a slot screwdriver (see Fig. B).

3. Turn over the battery compartment lid 7, take care not to damage the cables and cable connections (see Fig. B).

4. Exchange the old rechargeable battery 8 to a new one. Take care to the correct polarity, when inserting the new rechargeable battery. The polarity is indicated in the battery compartment. The new rechargeable battery has to have the same technical data like the old one.

5. Now again fasten the battery compartment lid 7, fasten the fastening screws 6 by using a small cross head screw-driver. Slide the On / Off switch 5 to the position ON.
6. Connect the solar cell housing 1 again to the lamp shade 2 and then connect every part of the product to each other (see Fig. C).

● Charging the rechargeable battery

Note that the product must be switched on when the battery is charging.

The charging time of the battery when the solar cell is used depends on the intensity of the sunlight and the angle of incidence of the light on the solar cell. Place the solar cell as perpendicular as possible to the angle of incidence of the light. In this way you will receive the highest light levels.

● Maintenance and care

The light-emitting diodes cannot be replaced. The product is maintenance-free, except for any necessary change of battery.

☐ Clean the product regularly with a dry, lint-free cloth. Use a slightly dampened cloth to remove more stubborn dirt.

- Troubleshooting

Note: This product has delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. If you notice that the product is malfunctioning, remove any sources of interference from the area of the product.

Note: Electrostatic discharges may cause product to malfunction. In the event of such malfunctions, remove the batteries briefly and reinsert them.

Error Cause Solution
The light will not switch on even though the sun shone on the product all day.	Artificial sources of light, e.g. street lighting, are interfering with the product.	Mount the product in a place where it cannot be disturbed by other sources of light.
The light does not come on or comes on only briefly.	The rechargeable battery is broken or there was not enough daylight.	Replace the rechargeable battery or mount the product in a place where it can receive more sunlight.

●Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries / rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries / rechargeable batteries and / or the product to the available collection points.

Environmental damage through incorrect disposal of the batteries / rechargeable batteries!

Batteries / rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries / rechargeable batteries at a local collection point.

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

● Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase. You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

CY ServiceCyprus

Tel.:[phone]

E-Mail: [e-mail]

CE IP44

Serbian mark of conformity