RCF DXT 3000 PLANNER - Alarm

DXT 3000 PLANNER - Alarm RCF - Free user manual and instructions

Find the device manual for free DXT 3000 PLANNER RCF in PDF.

📄 12 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice RCF DXT 3000 PLANNER - page 4
4 / 12
View the manual : English EN Italiano IT
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeVoice Alarm System Design Software
BrandRCF
ModelDXT 3000 Planner
CategoryAlarm (Voice Alarm System)
Software PlatformWindows PC
PurposeConfigure small to medium VOICEALARM systems
Compatible HardwareRCF DXT 3000 Series amplifiers (250W/500W, 2/4/6 zones, standalone/networked) and EN 54-24 loudspeakers
Supported StandardsEN 54-16, EN 54-24, UNI-ISO 7240-19, UNI-CEN/TS 54-32
Key FunctionsProject setup, zone and ADA management, automatic acoustic calculations, component suggestion, speaker positioning, power tapping
Output FormatPDF with product list and speaker distribution
Language SupportEnglish, Italian (others via translation request)
DeveloperRCF S.p.A.
Copyright2018 RCF S.p.A.
Manual Revision10307761 Rev A

Frequently Asked Questions - DXT 3000 PLANNER RCF

What is the RCF DXT 3000 Planner?
The RCF DXT 3000 Planner is a Windows-based software for designing voice alarm systems in compliance with EN 54 standards. It automates acoustic calculations and suggests component configurations.
Which hardware is compatible with DXT 3000 Planner?
The software works with RCF DXT 3000 Series amplifiers (250W and 500W models, 2/4/6 zones) and EN 54-24 certified loudspeakers.
What standards does the software follow?
It adheres to EN 54-16 (control equipment), EN 54-24 (loudspeakers), and uses algorithms from UNI-ISO 7240-19 and UNI-CEN/TS 54-32 for the prescriptive method.
How does the software help in system design?
It automatically calculates sound pressure levels, cable sections, and speaker power tapping based on room dimensions and ADA (Acoustically Distinguishable Areas) definitions.
Can I generate a project report?
Yes, the software produces a PDF document listing all required EN 54 certified products, speaker distribution, and power tapping settings for each ADA.
Is DXT 3000 Planner free?
The manual is available for free download. The software itself is provided by RCF; pricing or licensing details are not included in the manual.
What languages are supported?
The manual is available in English and Italian. Additional languages can be obtained via a translation request on the manual page.
What are the system requirements?
The software runs on Windows PC. Specific minimum requirements (OS version, RAM, etc.) are not listed in the manual, but a modern desktop computer is assumed.
How do I define zones and ADAs?
In the project, you set the number of Zones and for each zone, the number of ADAs (Acoustically Distinguishable Areas). You can name them and enter room dimensions or area.
Where can I download the manual?
The manual for RCF DXT 3000 Planner can be downloaded for free from notice-facile.com or similar manual sites in PDF format.

User questions about DXT 3000 PLANNER RCF

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Alarm in PDF format for free! Find your manual DXT 3000 PLANNER - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DXT 3000 PLANNER by RCF.

USER MANUAL DXT 3000 PLANNER RCF

VOICE ALARM SYSTEM DESIGN SOFTWARE SOFTWARE DI PROGETTAZIONE SISTEMI EVAC

CONTENTS

SOFTWARE OVERVIEW 4

OVERVIEW DEL SOFTWARE 8

SOFTWARE OVERVIEW

EN 54 VOICE ALARM SYSTEM DESIGNER SOFTWARE BY RCF

RCF DXT 3000 PLANNER - EN 54 VOICE ALARM SYSTEM DESIGNER SOFTWARE BY RCF - 1

natural_image Modern desktop computer setup with monitor, keyboard, mouse, and a virtual app interface (no visible text or symbols on the main device)

The Windows PC DXT 3000 Planner software allows configuring small and medium VOICEALARM systems in accordance to the regulations (prescriptive method), using EN 54-24 loudspeakers and EN 54-16 management electronics of the RCF DXT 3000 Series (250W and 500W models; 2, 4 and 6 zones, in stand-alone or networked configuration) and related accessories.

RCF DXT 3000 Planner performs all the mathematical calculations automatically for low reverberant environments with reduced background noise. The algorithms are derived from the standards UNI-ISO 7240-19 and UNI-CEN / TS 54-32, which allow the use of the Prescriptive Method in the acoustic design of a Voice Alarm system in spaces without acoustic issues.

DXT 3000 Planner is interactive, allowing even the less experienced user to obtain excellent results. In a few steps, the software suggests the list of components necessary for the configuration of the entire system, from the integrated control center to the optimization of the acoustic loudspeakers, providing primary indications about their positioning. The resulting document can also be used as specifications to support the economic proposal.

  1. Assign the name to the project and confirm the necessary parameters. Then add the optional requirements required by the system designer and define the Zones. In any case it is possible to move freely back and forth in the project, between Zones and ADAs (Acoustically Distinguishable Areas), and modify the choices made. The project, saved, can be recalled at any time.

DXT3000-Flaver 1.31 DCF3000-Flaver 1.31 DCF 3000 PLANNER EN54 CENTERED Project Name Off Blog Zones 2 + Options Use Spare Amplifier Use A/B lines Monitored GPUs Audio Inputs Desk-Top Microphone Emergency Microphone Background Music Open Save 2 Zones Next Report

EN54/16 Prescriptive Method Warning RT60 must be under 1.3s for all rooms Background noise must be under 6x88 for all rooms In case these criteria are not matched please contact RCF Engineering Support Group Close Background Model: Open Help Finish Help

  1. For each Zone, set the number of ADAs on which it is structured. There is the possibility of identifying areas and Zones by giving them a name.

DXT 3000 Planner E3.2 RCF DXT 3000 PLANNER ENS4 UFPB 1 Camfer Open Issue ADA 3 ADA 4 2 Main Filter ADA A 2 1 - NCT 3280/2 Total Power 26.00W N/A > 2 3 PL SD DN +4 PL SD DN +9 5 6 Calculate time 1.1x 20 Open Cancel Home Back R/2 Hour Report

DXT3000 Planner 13.2 RCF DXT 3000 PLANNER ENS4 COUNTER Start Sequence ASA 3 ASA 6 Name Corridor Operation Mode Changes Former Type Move MDE Forward SPT Section Height MPT: 200 LHP 5000 A B (G) Complete (free help) only Open Save None Back 1/2 Help Report

  1. In the zone page, where you select the number of ADA, you can enter the total length of the 100V line, from the amplifier to the last speaker of the most remote ADA (the cable that connects all the speakers in daisy chain) of all the ADA belonging to the same area. The software calculates the 100V cable section to contain the losses within 10% (1 dB). The section in mm2 is meant for each of the two copper wires.

DXT3000 Planner 1.3.2 RCF DXT 3000 PLANNER EN54 CERTIFIED 1 2 Board Room ADA 2 ADA 3 ADA 4 Board Room ADA n.1 1 • MIX 3259/2 Tota Power 23.6KW ADA 1 PL 10 EN 14 Calculation wire 4 inch 20 Calculation for the 100V cable. Open Save None Back Z/Z Next Report

  1. Then choose the model of the speaker you prefer to be used, by privileging if possible the ceiling installation, as it offers a more homogeneous and comfortable diffusion. Then select whether your environment is a corridor or a regular room. Finally, set the dimensions of the room or its area in square metre (in the latter case the program will hypothesize a form factor). If desired, it is possible to force the sound pressure level above the one automatically calculated by the program to fulfil the standards, by increasing the power delivered to the speaker (by tapping up the loudspeaker).

DFT3000 Power 1.1.2 Chemed Speaker Model Ceiling Wall Directional Home RS 5 EN CS 4009 EN RD 2472 EN HD 21 EN PL 50 EN CS 4043 EN RD 5 EN HD 31 EN PL 68 EN DP 1409 EN PL 70 EN DP 4 EN PL 50 EN DP 5 EN DU 50 EN DU 50 EN DAIP 5 EN MR 528 EN MR 528 EN RCF DXT 3000 PLANNER EN54 CEREMER 1 Corridor Open Source ADA 3 ADA 4 Name Corridor Sensors No. & - Total Power A.DW Speaker Model PL 50 EN Power 1.20 W Type Room Corridor Noise [dB] 65.0 Drift SP, Room Height 2.50 91.7 W/m 3.00 L/m 30.00 Area=95 80.6 Use compression system manual unit Open Save None Back 1/2 Next Report

  1. Repeat the same procedure for the other ADAs in the selected Zone and for other Zones and relevant ADAs.

DXT 3000 Runner 1.2.2 RCF DXT 3000 PLANNER EN54 CUTY-1.5 1 Camfer Open Space ADA 3 ADA 4 2 Name Open Space Speaker N.6 - Total Power 39.0W Speaker Model PL R2 EN Power 5.00 W Type Room Corridor Noise [dB] 45.0 Direct SPL Room Height 3.60 W/m 20.00 L/m 15.00 DXT 3000 Runner 1.2.2 RCF DXT 3000 PLANNER EN54 CUTY-1.5 1 Camfer Open Space ADA 3 ADA 4 2 Name Open Space Speaker N.6 - Total Power 39.0W Speaker Model PL R2 EN Power 5.00 W Type Room Corridor Noise [dB] Direct SPL Room Height 3.60 W/m 20.00 L/m 15.00 Area/ft Size 8 Use prescription method only Main Floor ASA n 2 1 - MCT 28802 Total Power 39.0W ASA n 2 PL RD DN x 4 PL RD DN x 9 1 / MCT 28802 Total Power 39.0W ASA n 2 1 / MCT 28802 Total Power 39.0W ASA n 2 1 / MCT 28802 Total Power 39.0W ASA n 2 1 / MCT 28802 Total Power 39.0W ASA n 2 1 / MCT 28802 Total Power 39.0W ASA n 2 1 /MCT 28802 Total Power 39.0W ASA n 2 1 /MCT 28802 Total Power 39.0W ASA n 2 1 /MCT 28802 Total Power 39.0W ASA n 2 1 /MCT 28802 Total Power 39.0W ASA n 2 1 /MCT 27802 Total Power 39.0W ASA n 2 1 /MCT 27802 Total Power 39.0W ASA n 2 1 /MCT 27802 Total Power 39.0W ASA n 2 1 /MCT 27802 Total Power 39.0W ASA n 2 1 /MCT 27802Total Power: PL RD DN x 4 PL RD DN x 9

  1. The result of all the above-mentioned deployment produces a PDF document containing the list of the EN 54 certified products necessary for the project. For each ADA a lists of the speakers with their possible theoretical distribution pattern in the environment is provided, in addition to the power tapping to set the speakers themselves.

Office Bldg - Project Report BOQ p/n Item Qty Master Units 17170177 MX 3250/2 1 13330317 AC BAT 18 1 Speakers 13100007 PL 50 EN 3 13100009 PL 82 EN 11 17170176 EOL 3-9 4 Startup 19999101 System Startup 1 System Diagram Music Source MX 3250/2 Fire Detection System CJ 428E or equiv. CA.2-C or equiv. Bipolar Cable 10V Corridor BoardRoom NOTE: Wire for 100V speaker lines not included NOTE: EOL Number is approximate and may change depending on operating conditions. The present application software for PC, "DXT 3600 Planner", has been developed to offer a simple tool suitable to support the design of small to medium size Voice Alarm Systems, articulated on one or more areas, n applying the "Prescriptive Method" to define the necessary type and amount of speakers, as defined in the EN Technical Specification 64-32, aligned to the ISO 7240-19 standard. The user of the "DXT 3600 Planner" is required to first verify ifthe acoustic constraints/values of the project are the range for the application of the Prescriptive Method. RCF is at your disposal in case the project you are working on does not allow you to proceed using the Prescriptive Method, or if you are not sure it does, or if you infer in any case to receive our direct support. Please contact us, we at RCF ESG (ESOG/RCF/T) are ready to provide you our help or your specific case, even if I receive the Analytic Method approach with reference to the norms themselves. ICF has a wide range of products to cover any kind of projects, from a small supermarket to a big airport, from a doctor to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital to a hospital Center OpenBox A0A1

© 2018 RCF S.p.A. - All rights reserved.

DA RCF UN SOFTWARE PER LA PROGETTAZIONE DI SISTEMI EN 54

RCF DXT 3000 PLANNER - DA RCF UN SOFTWARE PER LA PROGETTAZIONE DI SISTEMI EN 54 - 1

natural_image Modern desktop computer setup with monitor, keyboard, mouse, and a virtual interface (no visible text or symbols)

© 2018 RCF S.p.A. - All rights reserved.

RCF DXT 3000 PLANNER - DA RCF UN SOFTWARE PER LA PROGETTAZIONE DI SISTEMI EN 54 - 2

RCF S.p.A. Via Raffaello Sanzio, 13 - 42124 Reggio Emilia – Italy

10307761 Rev A

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : RCF

Model : DXT 3000 PLANNER

Category : Alarm