cruZer 3 2866 - Razor BRAUN - Free user manual and instructions

Product Type	Electric Shaver
Model	cruZer 3 2866
Brand	Braun
Dimensions (approx.)	150 x 70 x 40 mm
Weight (approx.)	200 g
Power Source	Rechargeable Li-Ion battery
Charging Time	8 hours for full charge
Operating Time	Up to 30 minutes of cordless shaving
Shaving System	Triple floating heads with UltraFlex foil
Trimmer	Pop-up precision trimmer for sideburns and moustache
Motivation	Powerful motor for efficient cutting
Cleaning	Fully washable under running water
Maintenance	Replace foil and cutter cassette every 18 months
Safety Features	Automatic shut-off when left on for 30 seconds
Spare Parts	Foil & Cutter cassette (model: 52B), cleaning brush
Repairability	Modular design, authorized service centers available
Included Accessories	Shaver, cleaning brush, charging cord, travel pouch
Warranty	2 years manufacturer warranty

Frequently Asked Questions - cruZer 3 2866 BRAUN

How long does the battery take to charge?

The Braun cruZer 3 2866 requires approximately 8 hours for a full charge. For best battery life, charge the device completely before first use.

Can I use the shaver while it's charging?

No, you cannot use the shaver while it is plugged in. It is designed for cordless operation only. Always unplug before use.

How often should I replace the shaver heads?

It is recommended to replace the foil and cutter cassette every 18 months to maintain optimal shaving performance. Use only genuine Braun parts (model 52B).

Is the shaver washable?

Yes, the Braun cruZer 3 2866 is fully washable under running water. You can rinse the shaver head and body for easy cleaning. Always dry it thoroughly after washing.

How do I clean the shaver properly?

Remove the shaver head and rinse it under hot water. Use the included cleaning brush to remove hair clippings. For a deeper clean, you can apply a drop of liquid soap on the foil and run the shaver for a few seconds before rinsing.

What does the pop-up trimmer do?

The pop-up precision trimmer is designed for trimming sideburns, moustaches, and beards. Slide the switch on the back of the shaver to deploy it.

How long does the battery last on a full charge?

A fully charged battery provides up to 30 minutes of cordless shaving time. This corresponds to approximately 10 shaves (3 minutes each).

What should I do if the shaver doesn't start?

First, ensure the battery is charged. If it still doesn't start, check the charging cord and socket. If the issue persists, contact Braun customer service.

Can I use the shaver in the shower?

Yes, the shaver is fully waterproof and can be used in the shower. However, avoid using it in a bathtub or submerging it completely.

Where can I purchase replacement parts?

Replacement parts such as the foil & cutter cassette (model 52B) and cleaning brush can be purchased from authorized Braun dealers or online through the official Braun website.

USER MANUAL cruZer 3 2866 BRAUN

Chinese

Our products are designed to meet the highest standards of quality, functionality and design. We hope you entirely enjoy your new Braun shaver.

Warning

Your shaver is provided with a special cord set with an integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it. Otherwise there is risk of electric shock.

Description

1 Foil protection cap 2 Shaver foil 3 Cutter block 4 Styler 4a Wide shaper (28 mm) 4b Narrow shaper (14 mm) 5 Charging light 6 On/off switch 7 Trimming attachment 8 Beard length setting 9 Special cord set

Charging

The best environmental temperature for charging is between 15 °C and 35 °C.

• Using the special cord set, connect the shaver to an electrical outlet with the motor switched off.
• When charging for the first time, leave the shaver to charge continuously for 4 hours. The green charging light (5) shows that the shaver is being charged. When the battery is fully charged, the charging light intermittently blinks on and off. This indicates that the battery maintains its full capacity.
• A full charge provides 30 minutes of cordless shaving time depending on your beard growth.
• Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour.
• Maximum battery capacity will only be reached after several charging/discharging cycles.
• If the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set.

Shaving

First, remove the trimming attachment: Using your thumbs, press against the side clips of the trimming attachment so that they swing off in the direction of the arrows (a).

Activate the on/off switch (6). The floating foil frame automatically adapts to your skin surface for a close, smooth shave.

For pre-shaving after a few days of not having shaved, use the wide shaper (4a) to pre-cut long hairs. For a close, smooth shave, finish with the foil.

Tips for the perfect shave

• We recommend that you shave before washing, as the skin tends to be slightly swollen after washing.
• Hold the shaver at right angles (90°) to the skin (b). Stretch the skin and shave against the direction of beard growth.
• To maintain 100% shaving performance, replace your foil and cutter block at least every 18 months or when worn.

Using the stylist

• The wide shaper (4a) evenly cuts and trims larger areas (c): Ideal for shaping sideburns, moustaches and partial short beards. Press the blue rib to push out the styler (4).
• The narrow shaper (4b) precisely defines lines and edges (d): Ideal for precise contouring. To use the narrow shaper, push out the stylist and turn it 180°.
• Frequent use of the stylist may reduce the battery capacity.

Using the trimming attachment

• The trimming attachment (7) is ideal for beard trimming and keeping it at a constant length.
• Place the trimming attachment onto the shaver foil (2) and press it against the shaver housing until it snaps into place with a click.
• Press the beard length selector (8) (e) and slide it up in order to set the desired beard length (length settings from top to bottom 1.2 mm, 2.8 mm, 4.4 mm, 6 mm). Push out the stylist (4).
• Activate the on/off switch and trim against hair growth by guiding the transparent comb part over the skin.
• After use, pull back the stylist. Remove the trimming attachment (a).

Cleaning

This appliance is suitable for cleaning under an open water tap.

Warning: Detach the hand-held part from the power supply before cleaning it in water.

Regular cleaning ensures better shaving performance.

Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean:

- Switch the shaver on (cordless) and rinse the shaving head under hot running water (f). A natural based soap may also be used provided it contains no particles or abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.

- Next, switch off the shaver, remove the shaver foil and the cutter block. Then leave the disassembled shaving parts to dry.

Alternatively, you may clean the shaver using the brush provided (g):

• Switch off the shaver. Remove the shaver foil.
• Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil.

Keeping your shaver in top shape

About every four weeks, clean the cutter block with Braun cleaning agents. Put a drop of light machine oil onto the shapers (4a, 4b) and the shaver foil (h).

Replacing the shaving parts

To maintain 100% shaving performance, replace your foil and cutter block at least every 18 months or when worn. Change both parts at the same time for a closer shave with less skin irritation.

(Shaver foil and cutter block: 2000 series)

Preserving the batteries

In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately. Then recharge the shaver to full capacity. Do not expose the shaver to temperatures higher than 50 °C for extended periods of time.

Environmental notice

This product contains rechargeable batteries. In the interest of protecting the environment, please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.

Subject to change without notice.

This product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC.

For electric specifications, see printing on the special cord set.

BRAUN

cruZer 3

2866·2864

Type 5733