Disco Jam 2 PYPSUFM1043B - DJ Equipment Pyle - Free user manual and instructions
Find the device manual for free Disco Jam 2 PYPSUFM1043B Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable PA System with Bluetooth and LED Lights |
| Model | Disco Jam 2 PYPSUFM1043B |
| Brand | Pyle |
| Dimensions (W x H x D) | Approximately 12 x 18 x 10 inches |
| Weight | Approximately 15 lbs |
| Power Supply | AC 110-240V, 60/50Hz (built-in power supply) or rechargeable battery |
| Battery Life | Up to 6 hours (depending on volume and lighting) |
| Bluetooth Version | Bluetooth 5.0 |
| Bluetooth Range | Up to 30 feet |
| Audio Output Power | 200 watts peak power |
| Speaker Configuration | 8 inch woofer + 1 inch tweeter |
| Microphone Inputs | 2 x 1/4" (6.35mm) microphone inputs + 1 x 1/8" (3.5mm) AUX input |
| LED Lighting Effects | Multi-color disco lights (independent on/off control) |
| Control Panel | Volume, echo, bass, treble, and light controls |
| USB/SD Card Playback | USB port and SD card slot for MP3 playback |
| FM Radio | Built-in FM tuner with antenna |
| Maintenance | Clean with dry cloth; keep away from moisture and extreme temperatures |
| Safety | Do not disassemble; avoid water exposure; use only supplied power adapter |
| Spare Parts / Repairability | Contact Pyle customer service for replacement parts; no user-serviceable parts inside |
| Included Accessories | Microphone, remote control, audio cable, power cord, user manual |
Frequently Asked Questions - Disco Jam 2 PYPSUFM1043B Pyle
How do I pair my phone via Bluetooth?
Turn on the Disco Jam 2, press the Bluetooth button until the LED flashes. On your phone, search for 'Pyle Disco Jam 2' and select it. Once connected, the LED will remain solid.
Can I connect a microphone and guitar simultaneously?
Yes, the unit has two 1/4" microphone inputs and one 1/8" AUX input. You can connect a microphone and a guitar (or other line-level device) at the same time. Use the volume controls to balance them.
How do I turn on the disco lights?
Press the Light button on the control panel or remote to cycle through modes (on, off, sound-activated). The lights will sync to the music rhythm.
Can I use this system while charging?
Yes, you can plug the power cord while playing. The battery will charge simultaneously. Charging time is approximately 4-5 hours.
How do I reset the unit if it freezes?
Turn off the power switch, unplug the AC cord, and wait 30 seconds. Then reconnect and power on. If the issue persists, contact Pyle support.
What is the maximum USB/SD card size supported?
The system supports USB drives and SD cards up to 32GB formatted in FAT32. Files should be MP3 format.
How do I adjust the echo effect on the microphone?
Use the Echo control knob labeled 'ECHO' on the front panel. Turn clockwise to increase the reverb effect on the microphone input.
Can I use this outdoors?
Yes, it's portable and battery-powered. However, avoid exposing it to rain or excessive moisture. The unit is not waterproof.
What does the 'TWS' button do?
The TWS (True Wireless Stereo) button allows you to pair two Disco Jam 2 units wirelessly for stereo sound. Press TWS on both units to link them.
Where can I download the user manual?
You can download the manual for free from notice-facile.com or the official Pyle website. The manual includes detailed instructions and troubleshooting tips.
User questions about Disco Jam 2 PYPSUFM1043B Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual Disco Jam 2 PYPSUFM1043B - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Disco Jam 2 PYPSUFM1043B by Pyle.