DS-K1T671M - Système de contrôle d'accès sécurisé Hikvision - Free user manual and instructions
Find the device manual for free DS-K1T671M Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Face Recognition Access Control Terminal |
| Model | DS-K1T671M |
| Brand | Hikvision |
| Display | 4.3-inch Touch Screen |
| Camera | 2 MP Wide-angle Lens |
| Recognition Method | Face, Card, PIN (Optional) |
| User Capacity | Up to 3,000 Faces |
| Card Capacity | Up to 3,000 Cards |
| Event Log | Up to 150,000 Events |
| Power Supply | 12 VDC, 2A |
| Power Consumption | ≤ 15 W |
| Dimensions (W×H×D) | 209.8 × 118.6 × 21.5 mm |
| Weight | Approx. 0.7 kg |
| Operating Temperature | -10°C to 50°C |
| Protection Level | IP65 (Face Module) |
| Interface | TCP/IP, Wiegand, RS-485, USB 2.0 |
| Security Features | Anti-spoofing, Face Encryption, Tamper Alarm |
| Maintenance | Clean lens with soft dry cloth; avoid liquid cleaners |
| Repairability | User-replaceable mounting bracket; contact service for internal repairs |
| Certifications | CE, FCC |
Frequently Asked Questions - DS-K1T671M Hikvision
How to reset the DS-K1T671M to factory defaults?
Press and hold the reset button (located on the bottom of the device) for 10 seconds using a paperclip. The device will restart and all settings will be cleared.
How to add users for face recognition?
Go to the admin menu, select 'User Management', then 'Add User'. Capture the user's face using the camera, and optionally bind a card or PIN. Save the entry.
What is the maximum number of faces the device can store?
The DS-K1T671M can store up to 3,000 faces and up to 3,000 cards.
How to connect the device to the network?
Connect an Ethernet cable to the RJ45 port on the device. Access the network settings via the touch screen to configure IP address (DHCP or static), subnet mask, and gateway.
Can the device be used outdoors?
Yes, the face recognition module has an IP65 rating, making it dust-tight and protected against water jets. However, the main body should be installed in a sheltered location.
What should I do if the device does not recognize my face?
Ensure the face is well-lit and directly facing the camera. Check that the user is enrolled correctly. Clean the lens with a soft cloth. If issues persist, adjust recognition sensitivity in settings.
How to export event logs?
Insert a USB flash drive into the USB port. Go to 'Event Management' > 'Export Logs'. Select the date range and export format (CSV or TXT). The file will be saved to the USB drive.
What type of power supply is required?
The device requires a 12 VDC power supply with a minimum current of 2A. Use a regulated power supply to avoid damage.
How to clean the device?
Turn off the device. Use a soft, lint-free cloth slightly dampened with water (no chemicals) to wipe the screen and camera lens. Dry with another soft cloth.
Can the device be integrated with third-party access control systems?
Yes, the DS-K1T671M supports Wiegand output and RS-485 communication, allowing integration with most standard access control panels.
User questions about DS-K1T671M Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Système de contrôle d'accès sécurisé in PDF format for free! Find your manual DS-K1T671M - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1T671M by Hikvision.