TuneFiBuds KTE-050 - Headphones Klip Xtreme - Free user manual and instructions

Product Type	True Wireless Stereo (TWS) Earbuds
Model	TuneFiBuds KTE-050
Chipset	JL AC9673
Bluetooth Version	5.1
Wireless Range	Up to 49.2 ft (15 m)
Driver Sensitivity	80 dB ± 3 dB
Driver Impedance	32 Ω
Frequency Response (Speaker)	100 Hz - 20 kHz
Microphone Sensitivity	-38 dB ± 3 dB
Microphone Frequency Response	100 Hz - 10 kHz
Battery (Earbud)	45 mAh Lithium-ion
Battery (Charging Case)	390 mAh Lithium-ion
Charging Time (Earbuds)	1 hour
Charging Time (Case)	2 hours
Playback Time (Earbuds)	Up to 9.2 hours
Total Playback Time (with Case)	Up to 37 hours (4 cycles)
Standby Time	Up to 300 hours
Water Resistance	IPX6
Dimensions (Case)	2.2 x 0.9 x 1.7 in (56 x 23 x 43 mm)
Weight	1.4 oz (40 g)
Charging Port	USB Type-C
Touch Controls	Yes (smart touch sensors)
Voice Assistant Compatibility	Siri and Google Assistant
Game Mode	Yes (low latency)
Included Accessories	Earbuds, charging case, Type-C cable, ear tips (S, L), user guide

Frequently Asked Questions - TuneFiBuds KTE-050 Klip Xtreme

How do I pair the TuneFiBuds KTE-050 with my phone?

Remove the earbuds from the charging case; they automatically enter pairing mode (LED blinks green and white). On your phone, enable Bluetooth and select 'KTE-050' from the discovered devices. Confirm pairing when prompted. The earbuds will remember your device for future connections.

How long does it take to fully charge the earbuds and case?

The earbuds charge fully in about 1 hour. The charging case takes approximately 2 hours to fully charge via the included USB Type-C cable. The case LED blinks red while charging and turns green when full.

What is the battery life of the earbuds?

The earbuds provide up to 9.2 hours of playback on a single charge (at 50% volume). Combined with the charging case, you get up to 37 hours of total listening time (4 full charge cycles).

Are the TuneFiBuds KTE-050 water-resistant?

Yes, the earbuds are rated IPX6, meaning they are resistant to heavy splashes and sweat. They can withstand rain and intense workouts, but should not be submerged in water.

How do I activate the voice assistant (Siri or Google Assistant)?

Triple-tap the left earbud multifunction button to activate the voice assistant. Ensure your phone's assistant is enabled and connected. Then speak your command.

What is Game Mode and how do I enable it?

Game Mode reduces audio latency for a more synchronized experience in games. To enable it, triple-tap the right earbud multifunction button. You will hear a prompt confirming activation.

How do I adjust the volume and skip tracks?

Volume: Press and hold the right earbud to increase volume, and the left earbud to decrease. Next track: Double-tap the right earbud. Previous track: Double-tap the left earbud.

Can I use only one earbud at a time?

Yes, the earbuds support mono mode. Simply remove one earbud from the case and pair it. The other can be stored or charged. Touch controls work independently on each earbud.

How do I reset or troubleshoot pairing issues?

If pairing fails, place both earbuds in the charging case, close it, wait 10 seconds, then remove them again. Ensure your phone's Bluetooth is on and no other device is interfering. If issues persist, forget the device on your phone and repeat the pairing process.

How should I clean and maintain the earbuds?

Wipe the earbuds and case with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the charging contacts clean. Store in a dry place. Avoid charging for more than 10 continuous hours to preserve battery life.

USER MANUAL TuneFiBuds KTE-050 Klip Xtreme

klipxtreme

TuneFiBuds

KTE-050

I. Introduction

Thank you for purchasing the KlipXtreme KTE-050 True Wireless Stereo (TWS) earbuds with HD microphone. We encourage you to read this quick installation guide thoroughly to get the most out of this wireless device.

Main features

• True wireless stereo (TWS), designed to stream audio wirelessly through two separate units simultaneously from the same audio source
• Extended listening with up to 37 hours of total playback time and approximately 300 hours in standby mode ³
• Experience outstanding sound technology with full audio details and musical textures
• Control at your fingertips: Smart touch sensors allow hassle-free management of your music and calls, with just a simple tap
• Compatible with Google and Siri voice assistant for true hands-free control at the touch of a button
• Keep going even under the rain or while on the go with IPX6 water and sweat resistant
• Free your music with Bluetooth® V5.1 that delivers reliable wireless connection ¹
  • Built-in HD microphone allows taking clear calls even in windy or loud environments
• Charging case includes a LED light to display battery status
• Modern and sleek case: Ultra-lightweight and portable, the charging case is built to conveniently

carry and charge the earbuds anywhere anywhere you go

- Low latency swiftly delivers audio for precise listening with near zero delay

Package content

• TWS earbuds (2)
- Charging case (1)
- User guide (1)
• Type-C charging cable (1)
- Small and large ear tips (2 sets)

2. Product overview

I Range estimate is based on an area free and clear of obstacles and interference, and within the line of sight between devices.
? It depends on the volume level and type of file being played.
3 Battery runtime car last 9.2 hours per charging cycle (4) for an estimated total of 37 hours combined.

I Power/multifunction button: Press the multifunction button to power and manage all media, calls, and other functions.
2 Earbuds LED indicator/microphone: The LED is green when charging; the LED turns off when it is fully charged; the LED blinks green and white when pairing. The microphone picks up your voice to enable hands-free calling and conferencing.
3 Charging case LED indicator: The LED blinks slowly when charging; the LED indicator remains on after the case is fully charged.
4 Charging port: Insert the Type-C cable in this port to charge the battery.

Multifunction button

Mode	Function
Answer an incoming call	Touch the multifunction button once
Ignore an incoming call	Tap the multifunction button for 2 seconds
Hang up a call	Touch the multifunction button during the call
Play/pause	Tap the multifunction button once
Volume +	Touch and hold the right multifunction button
Volume -	Tap and hold the left multifunction button
Next track	Double tap the right multifunction button
Previous track	Double tap the left multifunction button
Voice assistant	Touch the left multifunction button 3 times
Game mode	Tap the right multifunction button 3 times

LED indicators on the charging case and earbuds

Earbuds
Charging	Green LED on
Full charge	LED off
Pairing	LED blinks green and white
Paired	LED blinks white
Charging case
Charging	LED blinks slowly in red
Full charge	LED turns green

3. Basic operation

3.1 Charging the case and earbuds

1. To charge the case, plug the supplied USB cable into a power source and the Type C end in the case's charging port. The case starts charging automatically. The LED blinks slowly in red.
2. When the case is fully charged the LED turns green. Proceed to unplug the charging case from the power source and place the earbuds on the sockets of the charging case.
3. While the earbuds are being charged the earbuds LED indicator lights green. When fully charged, the LED indicator turn off. This takes about an hour.
4. The fully charged earbuds have up to 9.2 hours of playtime or up to 300 hours of standby time. However, these times may vary depending on the mobile device used, the usage profile, and the type of files being played.

IMPORTANT: Since the control buttons are sensitive to the touch, ensure to hold the earbuds by the stem when handling them. This will avoid accidentally tapping the touch buttons

3.2 Turning your earbuds on or off

1. Remove the earbuds from the charging case or press and hold the multifunction button for 3 seconds to power them on.
2. To turn the earbuds off, put them back in the charging case or tap the multifunction button for 5 seconds.

4. Advanced operation

4.1 TWS pairing

Simply take the earbuds out of the charging case. The earbuds sync with each other automatically and then enter into mobile pairing mode.

Note: Before installing the product, please make sure your device is Bluetooth® compatible.

4.2 Pairing the earbuds with your mobile device

I. Remove the earbuds from the charging case or press and hold the multifunction button for 3 seconds to turn them on. Both earbuds will pair automatically.
2. Set your Bluetooth® mobile device to "discover" the wireless earbuds.
3. Place the earbuds and your mobile device not more

than three feet from each other.

1. The LED light in the earbuds blinks green and white. Both are ready to enter pairing mode.
2. On your mobile device, tap the newly discovered audio device KTE-050 being displayed in the Bluetooth® list.
3. When the mobile device asks if you want to pair with it, click Yes or OK to accept.
4. If pairing is successful the "connected" prompt is heard and the earbud LED indicator blinks white.
5. If after 60 seconds the pairing process fails, please repeat steps 1 through 6 as described above.
6. The earbuds automatically go into standby mode after a short period of inactivity to save battery life.
7. You only need to pair the earbuds with your mobile device once, as they will reconnect with memorized devices automatically.

4.3 Using the wireless earbuds

I. Answering and ending a call

• When there is an incoming call, your phone will ring along with a tone through your earbuds.
• Touch the multifunction button once on any earbud to pick it up. You may also press the answer button on your mobile phone to receive the incoming communication in your earbuds.
  • To end a call, press the multifunction button once again on any earbud. Likewise, you may also finish the call directly using the end key on your smartphone.
• To ignore an incoming call and send the caller to voicemail, touch and hold the multifunction button for 2 seconds.

2. Music playback, voice commands, and game mode using your earbuds

• Press the multifunction button on either one of the earbuds to play and stop audio playback.
• Double touch the right multifunction button to go to the next track.
• Double tap the left multifunction button to go to the previous track.
• Press and hold the left multifunction button to lower the volume.
• Press and hold the right multifunction button to increase the volume.
• Touch the left multifunction button three times to enable the Google or Siri voice assistant.
• Tap the right multifunction button three times to enable the game mode.

5. Troubleshooting

If you can't connect the earbuds to your mobile device, try the following:

• Make sure the earbuds are charged, turned on, paired with, and connected to your mobile device.
• Verify if the Bluetooth feature is activated on your device.
• Check that the earbuds are within 30 feet of your mobile device and that there are no obstructions between the earbuds and the device, such as walls or other electronic devices.

Precautions

• Do not charge the earbuds nor the charging case for 10 continuous hours.
• Do not use cleaning solvents or strong chemicals to clean the device.
• Your earbuds are powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with compatible chargers.
• Unplug the USB charger from the source when not in use.
• Parts of the earphones are magnetic. Metallic materials may be attracted to the earbuds. Do not place credit cards or other magnetic storage media near the earbuds, as information stored on them may be erased.

Technical specifications

MPN KTE-050
Device
Type	TWS earbuds
Form factor	In-ear
Chipset	JL AC9673
Special features
Smart-touch technology	Touch control compatible with Siri and Google Voice assistant
Charging case battery LED indicator	Yes, LED indicator in the bottom of the charging case
IPX rating	IPX6 water-resistant
Volume control	Yes
Built in microphone for hands-free calls	Yes
Speaker
RMS power output	6mW
Frequency	100Hz-20kHz
Impedance	32Ω
Sensitivity	80dB±3dB
Microphone
Form factor	Built-in
Directivity	Omnidirectional
Frequency	100Hz-10kHz
Impedance	200Ω
Sensitivity	-38dB±3dB
Volume control	Yes
Connectivity
Connection type	Bluetooth® V5.1
Profiles supported	A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP, SMP, ATT, GAP, GATT, RFCOMM, SDP, L2CAP
Wireless RF frequency	2.402GHz-2.480GHz
Wireless range	From 32.8-49.2ft 1

Battery
Single earbud battery	45mAh lithium battery
Charging case battery	390mAh lithium battery
Charging connection type	Type-C
Wired charging rate (In V, A & W)	5V/0.3A, 1.5W
Charging case + earbud charging total time	2 hours
Earbud only battery charging time	1 hour
Charging case only battery charging time (wired)	2 hours
Number of charging case cycles before battery runs out	4 cycles
Earbud only battery runtime	Up to 9.2 hours (with the volume set at 50%) 2
Earbud total run time (including cycles)	Up to 37 hours 3
Battery standby time	About 300 hours
Additional information
Dimensions (LxWxH)	2.2x0.9x1.7in
Weight	1.4oz
Cable length	11.8in
Package contents	Earbuds, charging case, user guide, Type-C charging cable, small and large set of ear tips

I Range estimate is based on an area free and clear of obstacles and interference, and within the line of slight between devices.
2 It depends on the volume level and type of file being played.
3 Battery runtime can last 9.2 hours per charging cycle (4) for an estimated total of 37 hours combined.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

I. Introducción

KlipXtreme® is a registered trademark. All rights reserved. The Bluetooth® brand is a registered trademark owned by Bluetooth SIG, Inc. Siri and all related logos are trademarks of Apple.com, Inc. Google Assistant is a trademark of Google LLC. All other brand names and trademarks are the property of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any or all rights pertaining to those brands. Made in China.