Touchbuds KTE-006 - Headphones Klip Xtreme - Free user manual and instructions
Find the device manual for free Touchbuds KTE-006 Klip Xtreme in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | True Wireless Stereo (TWS) Earbuds |
| Model | Touchbuds KTE-006 |
| Brand | Klip Xtreme |
| Dimensions (Earbud) | Approx. 2.4 x 1.8 x 1.2 cm |
| Dimensions (Charging Case) | Approx. 6.5 x 5.0 x 2.5 cm |
| Weight (Earbud) | Approx. 4.5 g each |
| Weight (Case) | Approx. 40 g |
| Battery Capacity (Earbud) | 40 mAh each |
| Battery Capacity (Case) | 300 mAh |
| Charging Method | USB-C (cable included) or wireless charging compatible |
| Playtime | Up to 5 hours (earbuds), additional 20 hours with case |
| Bluetooth Version | 5.0 |
| Driver Size | 13 mm |
| Frequency Response | 20 Hz – 20 kHz |
| Water Resistance | IPX5 (sweat and splash proof) |
| Main Functions | Touch controls, noise isolation, built-in microphone, voice assistant support |
| Care and Cleaning | Wipe with dry cloth; avoid liquids; remove ear tips and clean with mild soap |
| Safety Warnings | Do not use at high volume for extended periods; keep away from children; do not disassemble |
| Spare Parts and Repairability | Ear tips (S/M/L) included; replacement parts available via Klip Xtreme support |
| General Information | Compatible with iOS, Android, and PC |
Frequently Asked Questions - Touchbuds KTE-006 Klip Xtreme
How do I pair the Touchbuds KTE-006 with my phone?
Open the charging case with the earbuds inside. Press and hold the pairing button until the LED flashes blue and red. On your phone, enable Bluetooth and select 'Klip Xtreme Touchbuds KTE-006'. The earbuds will connect automatically.
Why is one earbud not working?
Ensure both earbuds are charged. Reset by placing both in the case, hold the button for 10 seconds until the LED flashes red and white. Re-pair with your device. If the issue persists, contact support.
How long does it take to fully charge the earbuds?
The earbuds charge in about 1.5 hours when placed in the case. The case itself takes about 2 hours to fully charge via USB-C.
Can I use the earbuds while they are charging?
No, the earbuds cannot be used while charging. They must be in the case to charge.
How do I control music playback and calls?
Use touch controls: tap once to play/pause, double tap to skip track or answer/end call, long press to activate voice assistant or volume control (see manual for exact mapping).
Are the earbuds water-resistant?
Yes, the Touchbuds KTE-006 have an IPX5 rating, meaning they are protected against sweat and light rain. Do not submerge them in water.
What should I do if the earbuds disconnect frequently?
Move closer to your device and ensure there are no obstructions. Try resetting the earbuds. Also, check that your device's Bluetooth driver is up to date.
How do I reset the Touchbuds KTE-006 to factory settings?
Place both earbuds in the charging case and close the lid. Then, press and hold the pairing button for about 10 seconds until the LED flashes red and white. Release, open the lid, and the earbuds will be reset.
Can I use the earbuds with a computer or laptop?
Yes, the earbuds are compatible with any Bluetooth-enabled device, including Windows, macOS, and Linux computers.
What is the range of the Bluetooth connection?
The effective range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.
User questions about Touchbuds KTE-006 Klip Xtreme
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual Touchbuds KTE-006 - Klip Xtreme and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Touchbuds KTE-006 by Klip Xtreme.