MoonCloud-400 - Light effect machine Qtx - Free user manual and instructions

Product Type	Compact LED Fog Machine with RGB Moonflower Effect
Brand	Qtx
Model	MoonCloud-400
Order Reference	160.491UK
Power Supply	220-240Vac, 50/60Hz (IEC)
Power Consumption	400W
Fuse Rating	F5A
Warm-up Time	3-5 minutes
Fog Output	Approx. 2500 cu.ft per minute
Fluid Capacity	0.3 litre
LED Power	1W RGB LED x 9pcs + 2W RGB moonflower LED
Remote Control Frequency	433MHz
Battery for RF Remote	23A 12V (not supplied)
Dimensions	290 x 250 x 155mm
Weight	3kg
Included Accessories	Wired control unit, RF wireless remote, UK/EU mains leads, user guide, mounting bracket
Control Modes	Sound-to-light, wired remote, RF remote
Safety Features	Must be earthed; heating element; avoid water/moisture; use in upright position
Recommended Fluids	QTX Standard Fog Fluid (yellow) ref 160.643UK (1L) or 160.582UK (5L)
Maintenance	Clean casing with soft dry cloth; flush fog mechanism with distilled water periodically; use fog machine cleaning fluid (160.670UK)
Disposal	Classed as Electrical/Electronic equipment – dispose according to local council guidelines

Frequently Asked Questions - MoonCloud-400 Qtx

How do I set up the MoonCloud-400?

Unpack the unit, unscrew the top cap of the tank and fill with fog fluid. Replace the bottle and screw the cap securely, ensuring the pipe feeds to the bottom. Connect the wired control unit to the 'Remote Control' socket, then connect the IEC mains lead and power on. The unit warms up in 3-5 minutes.

How do I operate the fog and lights?

Use the wired control unit: press and hold the red button for fog on demand (release to stop). The default LED mode is sound-to-light. Use the RF remote to control both fog and lights: button 1 toggles continuous fog, button 2 adjusts auto LED speed, button 3 selects sound-to-light, button 4 cycles LED modes.

What type of fog fluid should I use?

Use QTX Standard Fog Fluid (yellow): ref 160.643UK (1 litre) or 160.582UK (5 litre). These are specifically formulated for heater-based fog machines.

How do I clean and maintain the machine?

Clean the casing with a soft dry or slightly damp cloth. Periodically flush the fog mechanism by operating with distilled water. Also use fog machine cleaning fluid (ref 160.670UK) regularly to prevent blockages.

Why is there no fog output?

Check fluid level in the tank. If fluid is present and pump is working, lines may be blocked – clean with distilled water and cleaning fluid. Also ensure the fog output is not switched off on the RF remote (button 1). If the unit is still cold (red LED not lit), wait for warm-up.

Why are the LED lights not working?

Ensure lights are not switched off on the RF remote. If in sound-to-light mode, make sure audio is loud enough to trigger the unit. Check the wired control unit is connected – the RF receiver is located inside it.

Can I use the RF remote without the wired control?

No, the RF remote's receiver is built into the wired control unit. The wired control must be connected at all times for the RF remote to function.

What safety precautions should I take?

Always use the unit in an upright position on a stable surface. Ensure proper earthing – the unit must be earthed. Parts of the housing may be hot during use. Do not expose to water or moisture. Unplug if liquid spills on non-tank parts.

How do I dispose of the product at end of life?

This product is classed as Electrical or Electronic equipment and should not be disposed with household waste. Follow your local council guidelines for proper disposal.

What is covered under warranty?

Damage caused by misuse is not covered. Do not attempt to repair yourself or warranty is voided. Keep original packaging and invoice for any returns. Contact your local dealer for issues.

USER MANUAL MoonCloud-400 Qtx

Compact LED Fog Machine with RGB Moonflower Effect

Order ref: 160.491UK

User Manual

Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty!

A compact and portable unit comprising a standard fog machine and 2 eye-popping light effects. The 400W fogger generates around 2500cu.ft/min, ample fog to easily fill smaller rooms and venues. The 9 bright RGB LEDs provide a traditional PAR wash effect and the additional central RGB moonflower then adds colourful patterns which both combine with the fog to provide a complete room filling solution. Control using either the in-built sound to light mode or with the included remotes, this all-in-one solution is ideal for mobile DJs, house parties, small events and more.

• Compact, portable unit comprising standard fog machine and 2 eye-popping light effects.
• 400W fog vaporizer with around 2500cu.ft/min output.
• Nine 1W LEDs and a 2W moonflower LED add a bright colourful light show to the smoke effect.
  • Control using sound to light or with the included wired and RF remotes.
• Supplied with UK and EU IEC leads and mounting bracket.

In the box:

Please check the contents to ensure that the product has been received in good condition.

• MoonCloud-400 Fog Machine
- Wired control unit
- RF wireless remote

• UK/EU Mains Leads
• User guide

If you find any accessory is missing or the machine has arrived with damage, please contact your local dealer at once. Do not try to fix this item yourself or you will invalidate the warranty. Please keep the original packaging and invoice for any possible replacement or return demands.

Warnings:

1. To prevent risk of fire or electric shock, do not expose electrical parts to water or moisture.
2. If liquids are spilled on areas other than inside the fluid tanks, disconnect the mains, allow the unit to dry out and have it checked by qualified personnel before use.
3. Avoid any impact, dropping or extreme pressure to the housing.
4. No user serviceable parts inside - do not open the case.
5. Allow the unit to acclimatise to room temperature before operating.
6. The MoonCloud-400 has a built-in fluid container so should be operated in an upright position.
7. Ensure that the unit is positioned on a stable, non-slip surface.

Safety and Cleaning:

1. Check for correct mains voltage and condition of IEC lead before connecting to mains.
2. This unit must be earthed.
3. This unit uses a heating element – be aware that parts of the housing may be hot during use!
4. Use a soft dry or slightly damp cloth to clean the casing.
5. Do not use strong solvents for cleaning the housing.
6. Clean the fog mechanism periodically by operating with distilled water.
7. It is also recommended to use fog machine cleaning fluid (160.670UK) periodically.

Recommended Fluids:

For the MoonCloud-400 fog machine, we strongly recommend the following fluids which have been specifically formulated to perform best with heater-based fog machines:

QTX ref code	Description	Size
160.643UK	Standard fog fluid yellow	1 Litre
160.582UK	Standard fog fluid yellow	5 Litre

Setting Up:

1. Unpack the MoonCloud-400 unit.
2. Unscrew the top cap of the tank and remove to fill with fog fluid.
3. Replace the bottle and screw the cap securely, making sure that the pipe is fed down to the bottom of the bottle to ensure a consistent flow of fluid.
4. Connect the wired control unit to the socket marked "Remote Control" on the rear panel.
5. Connect the IEC mains plug and power the unit on.
6. The unit will begin the warming up process which normally takes around 3-5 minutes.

Rear Panel:

1. Fluid level indicator
2. IEC power input
3. Earth screw (do not remove)
4. Power switch
5. Remote control input

Operation:

Wired Control Unit:

1. The wired control unit supplied with the MoonCloud-400 must be connected at all times during use.
2. Once the unit is warm enough to produce fog, the red LED at the bottom of the unit will light up.
3. For simple fog on demand press and hold the red button on the panel, release to stop the fog supply.

Please note: The unit's default LED setting is sound to light which will be enabled unless the RF remote is used to control the specific LED unit functions.

RF Remote Control:

The small RF remote supplied can be used to control both fog supply and the LED functions of the unit.

Please note: the receiver for the RF remote is located within the wired control unit so this must be connected for it to function correctly. See below for details of functions using the RF remote:

1: Continuous fog start/stop
2: Auto LED Mode slow/fast
3: LED sound to light mode (default)
4: LED individual modes select

Specifications:

Power supply	220-240Vac, 50/60Hz (IEC)
Power consumption	400W
Fuse rating	F5A
Warm up time	3-5 minutes
Remote control frequency	433Mhz
Fog output (approx.)	2500 cu.ft per minute
Fluid capacity	0.3 litre
LED power	1W RGB LED x 9pcs + 2W RGB moonflower LED
Battery remote	23A 12V (not supplied)
Dimensions	290 x 250 x 155mm
Weight	3kg

Troubleshooting:

No power to main unit or wired controller	Check mains voltage is correct and socket is switched on
	Check IEC lead is OK and connected properly
	Check mains fuse in IEC connector and fuse in plug top
	If fuse blows repeatedly, refer to qualified service personnel
Power to unit but no fog output in manual	Check fluid level in tank
	If fluid is OK and pump working, the lines may be blocked
	Check that output is not switched off on the key fob remote
	If blocked, clean with fog machine cleaner & distilled water
LED lights not working	Ensure lights are not switched off on the key fob remote
	If in sound to light mode, ensure audio is loud enough to be received by the unit

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park,

Taylor Road, Trafford Park, Manchester. M41 7JQ.

AVSL (Europe) Ltd, Unit 3D North Point House,

North Point Bus. Park, New Mallow Road, Cork, Ireland.