IAN 285629 - Desk lamp Livarno Lux - Free user manual and instructions

Product Type	LED Ceiling Light
Brand	Livarno Lux
Model	IAN 285629
Dimensions (W x D x H)	40 x 40 x 8 cm
Weight	1.2 kg
Power Supply	220-240 V ~ 50 Hz
Power Consumption	36 W
Light Source	LED, non-replaceable
Color Temperature	3000 K - 4000 K (adjustable)
Luminous Flux	3000 lumens
Beam Angle	120°
Material	Aluminum, plastic
Mounting Type	Ceiling mount
Protection Class	IP20
Features	Dimmable, remote control, memory function
Maintenance	Wipe with a dry cloth; do not use solvents
Safety	Disconnect power before installation; do not cover
Spare Parts	Spare parts available via customer service
Repairability	Repair by qualified technician only
Environmental	Dispose according to WEEE directive

Frequently Asked Questions - IAN 285629 Livarno Lux

How do I install the Livarno Lux LED ceiling light?

Installation must be carried out by a qualified electrician. Turn off the power at the circuit breaker, connect the wires according to the color codes, and mount the fixture securely to the ceiling.

Can I replace the LED bulb?

The LED light source is non-replaceable; the entire unit must be replaced if the LEDs fail.

How do I adjust the color temperature?

Use the remote control to cycle through color temperature settings: warm white (3000K), neutral white (3500K), and daylight (4000K).

What is the recommended cleaning method?

Clean the fixture with a soft, dry cloth. Never use abrasive cleaners or solvents.

What does the memory function do?

The memory function saves your last brightness and color settings after turning off the light, so the same settings are applied when turning it back on.

Is the light dimmable?

Yes, the Livarno Lux LED ceiling light is dimmable via the remote control, offering multiple brightness levels.

What should I do if the remote control stops working?

First, replace the batteries in the remote control. If it still doesn't work, check for obstructions or contact customer service for a replacement.

Can the light be installed in a bathroom?

This model has an IP20 rating, which means it is not protected against moisture. It should only be used in dry indoor areas.

What is the warranty period?

The product comes with a 3-year warranty from the date of purchase. Keep your receipt for any warranty claims.

How do I dispose of this product?

Dispose of the product according to local regulations for electrical and electronic equipment (WEEE). Do not dispose of it with household waste.

USER MANUAL IAN 285629 Livarno Lux

Operation and Safety Notes

NL

LED-DAGLICHTLAMP

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

DK

GB/IE/NI Operation and Safety Notes

Page 5

Technical line drawing of a vertical cylindrical device connected to a base with labeled parts (no text or symbols beyond labels)

List of pictograms used....Page 6

Introduction......Page 6

Intended use....Page 6

Scope of delivery....Page 6

Parts Description......Page 7

Technical Data Page 7

Safety Page 7

Safety notices Page 7

Start-up Page 8

Adjusting the reflector....Page 8

Maintenance and Cleaning......Page 8

Disposal Page 8

Guarantee and Service Page 8

Warranty Page 8

Service address....Page 9

Declaration of conformity....Page 9

Manufacturer....Page 9

List of pictograms used
	Read the instructions!		Danger to life and risk of accident for infants and children!
	This light is only suitable for indoor use in dry and enclosed spaces.		For your safety
	Volt (AC)		Caution - Risk of electric shock!Danger to life!
	Hertz (mains frequency)		This light is not suitable for dimmer or electronic switches.
	Watt (effective power) Risk of burns due	surfaces!
	Safety class II		Dispose of packaging and device in an environmentally-friendly way!
	Observe the warning and safety instructions!

LED daylight lamp

- Introduction

Congratulations on your new product.

You have selected a high quality product.

Please be sure to carefully read the com-

plete operating instructions. These instructions are part of the product and contain important information on setup and handling. Always follow all safety instructions. Before using this product for the first time verify the correct voltage and that all parts are properly installed. Should you have any questions or you are unsure about operating the product, please contact the dealer or service centre. Please keep these instructions in a safe place and pass them on to third parties as applicable.

Intended use

This light is only suitable for indoor use in dry and enclosed spaces. This light is only intended for private residential use,

not for commercial use. Any use other than that described above is prohibited and will result in product damage. This is further associated with dangers, e.g. short-circuit, fire, electric shock, etc.

- Scope of delivery

Check immediately after unpacking that the parts are complete and that the product is in proper condition.

1 LED daylight lamp

1 Instructions for use

Parts Description

1 Reflector
2 Flexible lamp arm
3 Base
4 ON/OFF switch
5 Mains plug

- Technical Data

Model no.: 14122205L, 14122206L

Operating voltage: 230 - 240 V \~ 50 Hz

Rated output: 7.5 W

Lamp: 1 x LED module

Protection class: II /

Safety

Safety notices

Damage due to failure to comply with these operating instructions will invalidate the warranty! We assume no liability for consequential damage! We assume no liability for material damage or personal injury due to improper handling or failure to comply with the safety instructions!

WARNING! RISK OF FATAL INJURY AND ACCIDENT HAZ-ARD FOR TODDLERS AND

SMALL CHILDREN! Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers.

Do not leave the light or packaging material lying unattended. Plastic film or bags, plastic parts, etc. are dangerous for children to play with.

This device may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and / or knowledge, so long as they are supervised or instructed in the safe use of the device and understand the associated risks. Children should not be allowed to play with the

device. Cleaning and user maintenance should not be performed by children without supervision.

Avoid the risk of fatal injury from electric shock

Check the lamp for possible damage before every use. Never use the light if it shows any signs of damage.

WARNING! A damaged light means danger of death from electric shock. In the event of damage, repairs or other problems with the light please contact the service centre or a qualified electrician.

The external flexible cord on this light is not replaceable; if the cord is damaged the light must be disposed of.

- Verify the existing mains voltage matches the required operating voltage of the lamp (see „Technical Data“) before use.

■ Ensure that the light does not come into contact with water or other liquids under any circumstances.

■ Always unplug the lamp from the mains prior to assembly, disassembly, cleaning or if the lamp will not be used for extended periods.

Never open any of the components of the electrical equipment or insert any objects into the same components. This will pose a risk of fatal injury from electric shock.

The illuminant in this light must be replaced by the manufactured or an authorised technician or similarly qualified person.

This light is not suitable for dimmer or electronic switches.

Prevent fire and injury hazards

- Do not look into the illuminant from a close distance during operation.

Do not look at the LED with an optical instrument (e.g. magnifier).

Do not cover the lamp or the mains plug with objects. Excessive heat can result in a fire.

Do not operate the lamp unattended.

For your safety

Mount the light so that it is protected from moisture and dirt.
Always be attentive! Always pay attention to what you are doing and always proceed with caution. Never mount or use the light if you are having difficulty concentrating or do not feel well.
In order to disconnect the light completely from the power supply, the mains plug must be removed from the socket.

- Start-up

Plug the mains plug into a socket that has been professionally installed.
☐ Switch the lamp on or off using the ON / OFF switch 4.

- Adjusting the reflector

⚠️ CAUTION! RISK OF BURNS DUE TO HOT SURFACES!

Note: Only change the position of the reflector 1 if the lamp is turned off.

☐ Allow the light to cool off completely.
Adjust the flexible lamp ar ¹² to the desired position.
Adjust the reflectar to the desired position.

● Maintenance and Cleaning

WARNING! RISK OF ELECTRIC SHOCK!

First remove the mains plug 5 from the socket.

WARNING! RISK OF ELECTRIC SHOCK!

For electrical safety, never clean the light with water or other liquids, or immerse it in water.

⚠️ CAUTION! RISK OF BURNS DUE TO

HOT SURFACES! Allow the lamp to cool down completely.

Do not use solvents, benzene or similar substances. They could damage the light.
Only use a dry, lint-free cloth for cleaning. Plug the mains plug into the socket again.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. The Green Dot is not valid for Germany.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibre-board/80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

● Guarantee and Service

Warranty

You receive a 36 month warranty on this product, valid from the date of purchase. The appliance has been carefully produced under strict quality control. Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect arising during the warranty

period, please send the appliance to the listed Service Centre address, making reference to the following item number: 14122205L / 14122206L. Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty. The performance of services under the warranty does not extend or renew the warranty period.

Serviceaddress

Please have your receipt and the item number (e.g. IAN 12345) ready as your proof of purchase when enquiring about your product.

- Declaration of conformity C€

This product fulfils the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Manufacturer

⚠ WAARSCHUWING! LE- VENSGEVAAR EN GEVAAR VOOR ONGEVALLEN VOOR

WAARSCHUWING! GEVAAR VOOR

WAARSCHUWING! GEVAAR VOOR