SmartWater 40T6MA - Water heater GE - Free user manual and instructions
Find the device manual for free SmartWater 40T6MA GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | GE |
| Model | SmartWater 40T6MA |
| Capacity | 40 Gallons (151 Liters) |
| Dimensions (H x W x D) | 48-60 inches x 20-24 inches x 20-24 inches (typical) |
| Weight (Empty) | Approx. 120-150 lbs (54-68 kg) |
| Power Supply | 240V / 30A / 4500-5500 Watts (dual elements) |
| Energy Factor (EF) | Approx. 0.92 (typical for electric) |
| Recovery Rate | Approx. 20-25 gallons per hour at 90°F rise |
| First Hour Rating | Approx. 55-70 gallons |
| Anode Rod | Replaceable sacrificial anode (typically magnesium) |
| Temperature & Pressure Relief Valve | Included, factory installed |
| Insulation | Foam insulation (R-Value approx. 12-18) |
| Control Type | Thermostat dual element (upper and lower) |
| Installation Type | Upright, floor standing |
| Connection Size | ¾ inch NPT water connections |
| Maintenance | Annual flushing, anode rod inspection every 3-5 years |
| Safety Features | ECO (Energy Cut Off), T&P relief valve, thermal cutoff |
| Warranty | Typically 6 years (tank) / 1 year (parts) |
| Certifications | UL listed, DOE compliant |
Frequently Asked Questions - SmartWater 40T6MA GE
How do I adjust the temperature on my GE SmartWater 40T6MA water heater?
Locate the thermostat access panel on the front of the unit. Remove the insulation and plastic cover. Use a flathead screwdriver to adjust the dial to your desired temperature (typically 120°F for energy savings and safety). Replace all covers securely.
How often should I flush my water heater?
It is recommended to flush the tank at least once a year to remove sediment buildup. Attach a garden hose to the drain valve, open the valve, and let water run until clear. Close the valve and refill the tank before restoring power.
Why is my water heater not producing hot water?
Possible causes: tripped circuit breaker, failed heating element, or faulty thermostat. Check the breaker first. If breaker is fine, test the upper and lower elements with a multimeter. Replace if open circuit. Also ensure the thermostat is not set too low.
What size breaker do I need for the SmartWater 40T6MA?
The unit requires a 30-amp double-pole breaker for 240V supply. Use 10 AWG copper wire. Always consult a licensed electrician for installation.
How long does the GE SmartWater 40T6MA water heater last?
With proper maintenance (annual flushing, anode rod replacement), an electric water heater typically lasts 10-15 years. The tank has a 6-year warranty, but lifespan depends on water quality and usage.
Can I install the water heater myself?
Installation involves electrical, plumbing, and safety considerations. It is highly recommended to hire a licensed plumber and electrician. Improper installation can lead to property damage or injury.
What is the recovery rate of the 40T6MA?
The recovery rate is approximately 20-25 gallons per hour at a 90°F temperature rise. This means it can reheat a full tank of cold water in about 1.5-2 hours.
How do I replace the anode rod in my GE water heater?
Turn off power and water supply. Drain a few gallons. Locate the anode rod on top of the tank (usually under a plastic cap). Use a 1-1/16 inch socket to unscrew it. Install a new rod with Teflon tape on threads. Tighten and refill.
Is the SmartWater 40T6MA energy efficient?
Yes, it has an Energy Factor around 0.92, meaning about 92% of energy goes into heating water. It meets current DOE standards. For additional savings, set temperature to 120°F and insulate hot water pipes.
Why is there water pooling around my water heater?
Check for leaks from T&P relief valve, drain valve, or water connections. If the tank itself is leaking, it may need replacement. Also inspect for condensation in humid conditions. A leaking valve may need tightening or replacement.
User questions about SmartWater 40T6MA GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual SmartWater 40T6MA - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartWater 40T6MA by GE.