EPH-6 - Camera tripod REVO - Free user manual and instructions
Find the device manual for free EPH-6 REVO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Camera Tripod |
| Brand | REVO |
| Model | EPH-6 |
| Material | Aluminum alloy |
| Maximum Height | 150 cm (59 inches) |
| Minimum Height | 45 cm (17.7 inches) |
| Folded Length | 55 cm (21.6 inches) |
| Weight | 1.6 kg (3.5 lbs) |
| Maximum Load Capacity | 5 kg (11 lbs) |
| Head Type | Ball head with quick release plate |
| Leg Sections | 4 sections |
| Leg Locks | Flip locks |
| Bubble Level | Yes, built-in |
| Quick Release Plate | Included (ARCA-Swiss compatible) |
| Accessories Included | Carrying bag, hex key, user manual |
| Care Instructions | Wipe with dry cloth; avoid moisture and saltwater; keep locks clean |
| Safety Warnings | Do not exceed maximum load; tighten all locks before use; use on stable ground |
| Spare Parts Availability | Quick release plates, rubber feet, replacement leg locks available from REVO |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - EPH-6 REVO
How do I extend the legs of the REVO EPH-6 tripod?
To extend the legs, unlock the flip locks by flipping them outward, pull the leg section to the desired length, then close the lock firmly. Start with the thickest section for stability.
How do I attach my camera to the tripod?
Screw the quick release plate onto the camera's tripod socket using the included hex key or a coin. Then slide the plate into the head's clamp until it clicks. Always ensure it is securely locked.
What is the maximum load capacity of the EPH-6?
The maximum load capacity is 5 kg (11 lbs). Do not exceed this weight to avoid instability or damage.
Can I use this tripod for video?
Yes, but the ball head is more suited for still photography. For smooth panning, you may need to loosen the tension knob. A fluid head is recommended for dedicated video use.
How do I level the tripod?
Use the built-in bubble level on the head. Adjust leg lengths individually or use the center column's tilt base if available. For precise leveling on uneven ground, adjust the legs until the bubble is centered.
How do I clean and maintain the tripod?
Wipe the legs and head with a dry, lint-free cloth. Avoid water or solvents. If locks become stiff, apply a small amount of silicone lubricant. Store in a dry place.
What is the folded length and weight?
The folded length is 55 cm (21.6 inches), and the weight is 1.6 kg (3.5 lbs), making it portable for travel.
How do I replace a rubber foot if it falls off?
Contact REVO support for replacement rubber feet. To install, simply push the new foot onto the leg tip. Ensure it fits snugly.
Is the head removable for use with other heads?
Yes, the head is attached via a standard 3/8-inch thread. You can unscrew it and mount a different head that uses the same thread size.
What should I do if the legs wobble?
Check that all leg locks are fully tightened. If the issue persists, inspect the leg sections for debris or damage, and ensure the tripod is on a stable surface. Adjust leg angles for wider stance if needed.
User questions about EPH-6 REVO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera tripod in PDF format for free! Find your manual EPH-6 - REVO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EPH-6 by REVO.